Source code
Revision control
Copy as Markdown
Other Tools
#![cfg_attr(not(feature = "sync"), allow(dead_code, unreachable_pub))]
//! A one-shot channel is used for sending a single message between
//! asynchronous tasks. The [`channel`] function is used to create a
//! [`Sender`] and [`Receiver`] handle pair that form the channel.
//!
//! The `Sender` handle is used by the producer to send the value.
//! The `Receiver` handle is used by the consumer to receive the value.
//!
//! Each handle can be used on separate tasks.
//!
//! Since the `send` method is not async, it can be used anywhere. This includes
//! sending between two runtimes, and using it from non-async code.
//!
//! If the [`Receiver`] is closed before receiving a message which has already
//! been sent, the message will remain in the channel until the receiver is
//! dropped, at which point the message will be dropped immediately.
//!
//! # Examples
//!
//! ```
//! use tokio::sync::oneshot;
//!
//! #[tokio::main]
//! async fn main() {
//! let (tx, rx) = oneshot::channel();
//!
//! tokio::spawn(async move {
//! if let Err(_) = tx.send(3) {
//! println!("the receiver dropped");
//! }
//! });
//!
//! match rx.await {
//! Ok(v) => println!("got = {:?}", v),
//! Err(_) => println!("the sender dropped"),
//! }
//! }
//! ```
//!
//! If the sender is dropped without sending, the receiver will fail with
//! [`error::RecvError`]:
//!
//! ```
//! use tokio::sync::oneshot;
//!
//! #[tokio::main]
//! async fn main() {
//! let (tx, rx) = oneshot::channel::<u32>();
//!
//! tokio::spawn(async move {
//! drop(tx);
//! });
//!
//! match rx.await {
//! Ok(_) => panic!("This doesn't happen"),
//! Err(_) => println!("the sender dropped"),
//! }
//! }
//! ```
//!
//! To use a oneshot channel in a `tokio::select!` loop, add `&mut` in front of
//! the channel.
//!
//! ```
//! use tokio::sync::oneshot;
//! use tokio::time::{interval, sleep, Duration};
//!
//! #[tokio::main]
//! # async fn _doc() {}
//! # #[tokio::main(flavor = "current_thread", start_paused = true)]
//! async fn main() {
//! let (send, mut recv) = oneshot::channel();
//! let mut interval = interval(Duration::from_millis(100));
//!
//! # let handle =
//! tokio::spawn(async move {
//! sleep(Duration::from_secs(1)).await;
//! send.send("shut down").unwrap();
//! });
//!
//! loop {
//! tokio::select! {
//! _ = interval.tick() => println!("Another 100ms"),
//! msg = &mut recv => {
//! println!("Got message: {}", msg.unwrap());
//! break;
//! }
//! }
//! }
//! # handle.await.unwrap();
//! }
//! ```
//!
//! To use a `Sender` from a destructor, put it in an [`Option`] and call
//! [`Option::take`].
//!
//! ```
//! use tokio::sync::oneshot;
//!
//! struct SendOnDrop {
//! sender: Option<oneshot::Sender<&'static str>>,
//! }
//! impl Drop for SendOnDrop {
//! fn drop(&mut self) {
//! if let Some(sender) = self.sender.take() {
//! // Using `let _ =` to ignore send errors.
//! let _ = sender.send("I got dropped!");
//! }
//! }
//! }
//!
//! #[tokio::main]
//! # async fn _doc() {}
//! # #[tokio::main(flavor = "current_thread")]
//! async fn main() {
//! let (send, recv) = oneshot::channel();
//!
//! let send_on_drop = SendOnDrop { sender: Some(send) };
//! drop(send_on_drop);
//!
//! assert_eq!(recv.await, Ok("I got dropped!"));
//! }
//! ```
use crate::loom::cell::UnsafeCell;
use crate::loom::sync::atomic::AtomicUsize;
use crate::loom::sync::Arc;
#[cfg(all(tokio_unstable, feature = "tracing"))]
use crate::util::trace;
use std::fmt;
use std::future::Future;
use std::mem::MaybeUninit;
use std::pin::Pin;
use std::sync::atomic::Ordering::{self, AcqRel, Acquire};
use std::task::Poll::{Pending, Ready};
use std::task::{Context, Poll, Waker};
/// Sends a value to the associated [`Receiver`].
///
/// A pair of both a [`Sender`] and a [`Receiver`] are created by the
/// [`channel`](fn@channel) function.
///
/// # Examples
///
/// ```
/// use tokio::sync::oneshot;
///
/// #[tokio::main]
/// async fn main() {
/// let (tx, rx) = oneshot::channel();
///
/// tokio::spawn(async move {
/// if let Err(_) = tx.send(3) {
/// println!("the receiver dropped");
/// }
/// });
///
/// match rx.await {
/// Ok(v) => println!("got = {:?}", v),
/// Err(_) => println!("the sender dropped"),
/// }
/// }
/// ```
///
/// If the sender is dropped without sending, the receiver will fail with
/// [`error::RecvError`]:
///
/// ```
/// use tokio::sync::oneshot;
///
/// #[tokio::main]
/// async fn main() {
/// let (tx, rx) = oneshot::channel::<u32>();
///
/// tokio::spawn(async move {
/// drop(tx);
/// });
///
/// match rx.await {
/// Ok(_) => panic!("This doesn't happen"),
/// Err(_) => println!("the sender dropped"),
/// }
/// }
/// ```
///
/// To use a `Sender` from a destructor, put it in an [`Option`] and call
/// [`Option::take`].
///
/// ```
/// use tokio::sync::oneshot;
///
/// struct SendOnDrop {
/// sender: Option<oneshot::Sender<&'static str>>,
/// }
/// impl Drop for SendOnDrop {
/// fn drop(&mut self) {
/// if let Some(sender) = self.sender.take() {
/// // Using `let _ =` to ignore send errors.
/// let _ = sender.send("I got dropped!");
/// }
/// }
/// }
///
/// #[tokio::main]
/// # async fn _doc() {}
/// # #[tokio::main(flavor = "current_thread")]
/// async fn main() {
/// let (send, recv) = oneshot::channel();
///
/// let send_on_drop = SendOnDrop { sender: Some(send) };
/// drop(send_on_drop);
///
/// assert_eq!(recv.await, Ok("I got dropped!"));
/// }
/// ```
///
/// [`Option`]: std::option::Option
/// [`Option::take`]: std::option::Option::take
#[derive(Debug)]
pub struct Sender<T> {
inner: Option<Arc<Inner<T>>>,
#[cfg(all(tokio_unstable, feature = "tracing"))]
resource_span: tracing::Span,
}
/// Receives a value from the associated [`Sender`].
///
/// A pair of both a [`Sender`] and a [`Receiver`] are created by the
/// [`channel`](fn@channel) function.
///
/// This channel has no `recv` method because the receiver itself implements the
/// [`Future`] trait. To receive a `Result<T, `[`error::RecvError`]`>`, `.await` the `Receiver` object directly.
///
/// The `poll` method on the `Future` trait is allowed to spuriously return
/// `Poll::Pending` even if the message has been sent. If such a spurious
/// failure happens, then the caller will be woken when the spurious failure has
/// been resolved so that the caller can attempt to receive the message again.
/// Note that receiving such a wakeup does not guarantee that the next call will
/// succeed — it could fail with another spurious failure. (A spurious failure
/// does not mean that the message is lost. It is just delayed.)
///
/// [`Future`]: trait@std::future::Future
///
/// # Examples
///
/// ```
/// use tokio::sync::oneshot;
///
/// #[tokio::main]
/// async fn main() {
/// let (tx, rx) = oneshot::channel();
///
/// tokio::spawn(async move {
/// if let Err(_) = tx.send(3) {
/// println!("the receiver dropped");
/// }
/// });
///
/// match rx.await {
/// Ok(v) => println!("got = {:?}", v),
/// Err(_) => println!("the sender dropped"),
/// }
/// }
/// ```
///
/// If the sender is dropped without sending, the receiver will fail with
/// [`error::RecvError`]:
///
/// ```
/// use tokio::sync::oneshot;
///
/// #[tokio::main]
/// async fn main() {
/// let (tx, rx) = oneshot::channel::<u32>();
///
/// tokio::spawn(async move {
/// drop(tx);
/// });
///
/// match rx.await {
/// Ok(_) => panic!("This doesn't happen"),
/// Err(_) => println!("the sender dropped"),
/// }
/// }
/// ```
///
/// To use a `Receiver` in a `tokio::select!` loop, add `&mut` in front of the
/// channel.
///
/// ```
/// use tokio::sync::oneshot;
/// use tokio::time::{interval, sleep, Duration};
///
/// #[tokio::main]
/// # async fn _doc() {}
/// # #[tokio::main(flavor = "current_thread", start_paused = true)]
/// async fn main() {
/// let (send, mut recv) = oneshot::channel();
/// let mut interval = interval(Duration::from_millis(100));
///
/// # let handle =
/// tokio::spawn(async move {
/// sleep(Duration::from_secs(1)).await;
/// send.send("shut down").unwrap();
/// });
///
/// loop {
/// tokio::select! {
/// _ = interval.tick() => println!("Another 100ms"),
/// msg = &mut recv => {
/// println!("Got message: {}", msg.unwrap());
/// break;
/// }
/// }
/// }
/// # handle.await.unwrap();
/// }
/// ```
#[derive(Debug)]
pub struct Receiver<T> {
inner: Option<Arc<Inner<T>>>,
#[cfg(all(tokio_unstable, feature = "tracing"))]
resource_span: tracing::Span,
#[cfg(all(tokio_unstable, feature = "tracing"))]
async_op_span: tracing::Span,
#[cfg(all(tokio_unstable, feature = "tracing"))]
async_op_poll_span: tracing::Span,
}
pub mod error {
//! Oneshot error types.
use std::fmt;
/// Error returned by the `Future` implementation for `Receiver`.
///
/// This error is returned by the receiver when the sender is dropped without sending.
#[derive(Debug, Eq, PartialEq, Clone)]
pub struct RecvError(pub(super) ());
/// Error returned by the `try_recv` function on `Receiver`.
#[derive(Debug, Eq, PartialEq, Clone)]
pub enum TryRecvError {
/// The send half of the channel has not yet sent a value.
Empty,
/// The send half of the channel was dropped without sending a value.
Closed,
}
// ===== impl RecvError =====
impl fmt::Display for RecvError {
fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
write!(fmt, "channel closed")
}
}
impl std::error::Error for RecvError {}
// ===== impl TryRecvError =====
impl fmt::Display for TryRecvError {
fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
match self {
TryRecvError::Empty => write!(fmt, "channel empty"),
TryRecvError::Closed => write!(fmt, "channel closed"),
}
}
}
impl std::error::Error for TryRecvError {}
}
use self::error::*;
struct Inner<T> {
/// Manages the state of the inner cell.
state: AtomicUsize,
/// The value. This is set by `Sender` and read by `Receiver`. The state of
/// the cell is tracked by `state`.
value: UnsafeCell<Option<T>>,
/// The task to notify when the receiver drops without consuming the value.
///
/// ## Safety
///
/// The `TX_TASK_SET` bit in the `state` field is set if this field is
/// initialized. If that bit is unset, this field may be uninitialized.
tx_task: Task,
/// The task to notify when the value is sent.
///
/// ## Safety
///
/// The `RX_TASK_SET` bit in the `state` field is set if this field is
/// initialized. If that bit is unset, this field may be uninitialized.
rx_task: Task,
}
struct Task(UnsafeCell<MaybeUninit<Waker>>);
impl Task {
unsafe fn will_wake(&self, cx: &mut Context<'_>) -> bool {
self.with_task(|w| w.will_wake(cx.waker()))
}
unsafe fn with_task<F, R>(&self, f: F) -> R
where
F: FnOnce(&Waker) -> R,
{
self.0.with(|ptr| {
let waker: *const Waker = (*ptr).as_ptr();
f(&*waker)
})
}
unsafe fn drop_task(&self) {
self.0.with_mut(|ptr| {
let ptr: *mut Waker = (*ptr).as_mut_ptr();
ptr.drop_in_place();
});
}
unsafe fn set_task(&self, cx: &mut Context<'_>) {
self.0.with_mut(|ptr| {
let ptr: *mut Waker = (*ptr).as_mut_ptr();
ptr.write(cx.waker().clone());
});
}
}
#[derive(Clone, Copy)]
struct State(usize);
/// Creates a new one-shot channel for sending single values across asynchronous
/// tasks.
///
/// The function returns separate "send" and "receive" handles. The `Sender`
/// handle is used by the producer to send the value. The `Receiver` handle is
/// used by the consumer to receive the value.
///
/// Each handle can be used on separate tasks.
///
/// # Examples
///
/// ```
/// use tokio::sync::oneshot;
///
/// #[tokio::main]
/// async fn main() {
/// let (tx, rx) = oneshot::channel();
///
/// tokio::spawn(async move {
/// if let Err(_) = tx.send(3) {
/// println!("the receiver dropped");
/// }
/// });
///
/// match rx.await {
/// Ok(v) => println!("got = {:?}", v),
/// Err(_) => println!("the sender dropped"),
/// }
/// }
/// ```
#[track_caller]
pub fn channel<T>() -> (Sender<T>, Receiver<T>) {
#[cfg(all(tokio_unstable, feature = "tracing"))]
let resource_span = {
let location = std::panic::Location::caller();
let resource_span = tracing::trace_span!(
"runtime.resource",
concrete_type = "Sender|Receiver",
kind = "Sync",
loc.file = location.file(),
loc.line = location.line(),
loc.col = location.column(),
);
resource_span.in_scope(|| {
tracing::trace!(
target: "runtime::resource::state_update",
tx_dropped = false,
tx_dropped.op = "override",
)
});
resource_span.in_scope(|| {
tracing::trace!(
target: "runtime::resource::state_update",
rx_dropped = false,
rx_dropped.op = "override",
)
});
resource_span.in_scope(|| {
tracing::trace!(
target: "runtime::resource::state_update",
value_sent = false,
value_sent.op = "override",
)
});
resource_span.in_scope(|| {
tracing::trace!(
target: "runtime::resource::state_update",
value_received = false,
value_received.op = "override",
)
});
resource_span
};
let inner = Arc::new(Inner {
state: AtomicUsize::new(State::new().as_usize()),
value: UnsafeCell::new(None),
tx_task: Task(UnsafeCell::new(MaybeUninit::uninit())),
rx_task: Task(UnsafeCell::new(MaybeUninit::uninit())),
});
let tx = Sender {
inner: Some(inner.clone()),
#[cfg(all(tokio_unstable, feature = "tracing"))]
resource_span: resource_span.clone(),
};
#[cfg(all(tokio_unstable, feature = "tracing"))]
let async_op_span = resource_span
.in_scope(|| tracing::trace_span!("runtime.resource.async_op", source = "Receiver::await"));
#[cfg(all(tokio_unstable, feature = "tracing"))]
let async_op_poll_span =
async_op_span.in_scope(|| tracing::trace_span!("runtime.resource.async_op.poll"));
let rx = Receiver {
inner: Some(inner),
#[cfg(all(tokio_unstable, feature = "tracing"))]
resource_span,
#[cfg(all(tokio_unstable, feature = "tracing"))]
async_op_span,
#[cfg(all(tokio_unstable, feature = "tracing"))]
async_op_poll_span,
};
(tx, rx)
}
impl<T> Sender<T> {
/// Attempts to send a value on this channel, returning it back if it could
/// not be sent.
///
/// This method consumes `self` as only one value may ever be sent on a oneshot
/// channel. It is not marked async because sending a message to an oneshot
/// channel never requires any form of waiting. Because of this, the `send`
/// method can be used in both synchronous and asynchronous code without
/// problems.
///
/// A successful send occurs when it is determined that the other end of the
/// channel has not hung up already. An unsuccessful send would be one where
/// the corresponding receiver has already been deallocated. Note that a
/// return value of `Err` means that the data will never be received, but
/// a return value of `Ok` does *not* mean that the data will be received.
/// It is possible for the corresponding receiver to hang up immediately
/// after this function returns `Ok`.
///
/// # Examples
///
/// Send a value to another task
///
/// ```
/// use tokio::sync::oneshot;
///
/// #[tokio::main]
/// async fn main() {
/// let (tx, rx) = oneshot::channel();
///
/// tokio::spawn(async move {
/// if let Err(_) = tx.send(3) {
/// println!("the receiver dropped");
/// }
/// });
///
/// match rx.await {
/// Ok(v) => println!("got = {:?}", v),
/// Err(_) => println!("the sender dropped"),
/// }
/// }
/// ```
pub fn send(mut self, t: T) -> Result<(), T> {
let inner = self.inner.take().unwrap();
inner.value.with_mut(|ptr| unsafe {
// SAFETY: The receiver will not access the `UnsafeCell` unless the
// channel has been marked as "complete" (the `VALUE_SENT` state bit
// is set).
// That bit is only set by the sender later on in this method, and
// calling this method consumes `self`. Therefore, if it was possible to
// call this method, we know that the `VALUE_SENT` bit is unset, and
// the receiver is not currently accessing the `UnsafeCell`.
*ptr = Some(t);
});
if !inner.complete() {
unsafe {
// SAFETY: The receiver will not access the `UnsafeCell` unless
// the channel has been marked as "complete". Calling
// `complete()` will return true if this bit is set, and false
// if it is not set. Thus, if `complete()` returned false, it is
// safe for us to access the value, because we know that the
// receiver will not.
return Err(inner.consume_value().unwrap());
}
}
#[cfg(all(tokio_unstable, feature = "tracing"))]
self.resource_span.in_scope(|| {
tracing::trace!(
target: "runtime::resource::state_update",
value_sent = true,
value_sent.op = "override",
)
});
Ok(())
}
/// Waits for the associated [`Receiver`] handle to close.
///
/// A [`Receiver`] is closed by either calling [`close`] explicitly or the
/// [`Receiver`] value is dropped.
///
/// This function is useful when paired with `select!` to abort a
/// computation when the receiver is no longer interested in the result.
///
/// # Return
///
/// Returns a `Future` which must be awaited on.
///
/// [`Receiver`]: Receiver
/// [`close`]: Receiver::close
///
/// # Examples
///
/// Basic usage
///
/// ```
/// use tokio::sync::oneshot;
///
/// #[tokio::main]
/// async fn main() {
/// let (mut tx, rx) = oneshot::channel::<()>();
///
/// tokio::spawn(async move {
/// drop(rx);
/// });
///
/// tx.closed().await;
/// println!("the receiver dropped");
/// }
/// ```
///
/// Paired with select
///
/// ```
/// use tokio::sync::oneshot;
/// use tokio::time::{self, Duration};
///
/// async fn compute() -> String {
/// // Complex computation returning a `String`
/// # "hello".to_string()
/// }
///
/// #[tokio::main]
/// async fn main() {
/// let (mut tx, rx) = oneshot::channel();
///
/// tokio::spawn(async move {
/// tokio::select! {
/// _ = tx.closed() => {
/// // The receiver dropped, no need to do any further work
/// }
/// value = compute() => {
/// // The send can fail if the channel was closed at the exact same
/// // time as when compute() finished, so just ignore the failure.
/// let _ = tx.send(value);
/// }
/// }
/// });
///
/// // Wait for up to 10 seconds
/// let _ = time::timeout(Duration::from_secs(10), rx).await;
/// }
/// ```
pub async fn closed(&mut self) {
use crate::future::poll_fn;
#[cfg(all(tokio_unstable, feature = "tracing"))]
let resource_span = self.resource_span.clone();
#[cfg(all(tokio_unstable, feature = "tracing"))]
let closed = trace::async_op(
|| poll_fn(|cx| self.poll_closed(cx)),
resource_span,
"Sender::closed",
"poll_closed",
false,
);
#[cfg(not(all(tokio_unstable, feature = "tracing")))]
let closed = poll_fn(|cx| self.poll_closed(cx));
closed.await
}
/// Returns `true` if the associated [`Receiver`] handle has been dropped.
///
/// A [`Receiver`] is closed by either calling [`close`] explicitly or the
/// [`Receiver`] value is dropped.
///
/// If `true` is returned, a call to `send` will always result in an error.
///
/// [`Receiver`]: Receiver
/// [`close`]: Receiver::close
///
/// # Examples
///
/// ```
/// use tokio::sync::oneshot;
///
/// #[tokio::main]
/// async fn main() {
/// let (tx, rx) = oneshot::channel();
///
/// assert!(!tx.is_closed());
///
/// drop(rx);
///
/// assert!(tx.is_closed());
/// assert!(tx.send("never received").is_err());
/// }
/// ```
pub fn is_closed(&self) -> bool {
let inner = self.inner.as_ref().unwrap();
let state = State::load(&inner.state, Acquire);
state.is_closed()
}
/// Checks whether the oneshot channel has been closed, and if not, schedules the
/// `Waker` in the provided `Context` to receive a notification when the channel is
/// closed.
///
/// A [`Receiver`] is closed by either calling [`close`] explicitly, or when the
/// [`Receiver`] value is dropped.
///
/// Note that on multiple calls to poll, only the `Waker` from the `Context` passed
/// to the most recent call will be scheduled to receive a wakeup.
///
/// [`Receiver`]: struct@crate::sync::oneshot::Receiver
/// [`close`]: fn@crate::sync::oneshot::Receiver::close
///
/// # Return value
///
/// This function returns:
///
/// * `Poll::Pending` if the channel is still open.
/// * `Poll::Ready(())` if the channel is closed.
///
/// # Examples
///
/// ```
/// use tokio::sync::oneshot;
///
/// use futures::future::poll_fn;
///
/// #[tokio::main]
/// async fn main() {
/// let (mut tx, mut rx) = oneshot::channel::<()>();
///
/// tokio::spawn(async move {
/// rx.close();
/// });
///
/// poll_fn(|cx| tx.poll_closed(cx)).await;
///
/// println!("the receiver dropped");
/// }
/// ```
pub fn poll_closed(&mut self, cx: &mut Context<'_>) -> Poll<()> {
ready!(crate::trace::trace_leaf(cx));
// Keep track of task budget
let coop = ready!(crate::runtime::coop::poll_proceed(cx));
let inner = self.inner.as_ref().unwrap();
let mut state = State::load(&inner.state, Acquire);
if state.is_closed() {
coop.made_progress();
return Ready(());
}
if state.is_tx_task_set() {
let will_notify = unsafe { inner.tx_task.will_wake(cx) };
if !will_notify {
state = State::unset_tx_task(&inner.state);
if state.is_closed() {
// Set the flag again so that the waker is released in drop
State::set_tx_task(&inner.state);
coop.made_progress();
return Ready(());
} else {
unsafe { inner.tx_task.drop_task() };
}
}
}
if !state.is_tx_task_set() {
// Attempt to set the task
unsafe {
inner.tx_task.set_task(cx);
}
// Update the state
state = State::set_tx_task(&inner.state);
if state.is_closed() {
coop.made_progress();
return Ready(());
}
}
Pending
}
}
impl<T> Drop for Sender<T> {
fn drop(&mut self) {
if let Some(inner) = self.inner.as_ref() {
inner.complete();
#[cfg(all(tokio_unstable, feature = "tracing"))]
self.resource_span.in_scope(|| {
tracing::trace!(
target: "runtime::resource::state_update",
tx_dropped = true,
tx_dropped.op = "override",
)
});
}
}
}
impl<T> Receiver<T> {
/// Prevents the associated [`Sender`] handle from sending a value.
///
/// Any `send` operation which happens after calling `close` is guaranteed
/// to fail. After calling `close`, [`try_recv`] should be called to
/// receive a value if one was sent **before** the call to `close`
/// completed.
///
/// This function is useful to perform a graceful shutdown and ensure that a
/// value will not be sent into the channel and never received.
///
/// `close` is no-op if a message is already received or the channel
/// is already closed.
///
/// [`Sender`]: Sender
/// [`try_recv`]: Receiver::try_recv
///
/// # Examples
///
/// Prevent a value from being sent
///
/// ```
/// use tokio::sync::oneshot;
/// use tokio::sync::oneshot::error::TryRecvError;
///
/// #[tokio::main]
/// async fn main() {
/// let (tx, mut rx) = oneshot::channel();
///
/// assert!(!tx.is_closed());
///
/// rx.close();
///
/// assert!(tx.is_closed());
/// assert!(tx.send("never received").is_err());
///
/// match rx.try_recv() {
/// Err(TryRecvError::Closed) => {}
/// _ => unreachable!(),
/// }
/// }
/// ```
///
/// Receive a value sent **before** calling `close`
///
/// ```
/// use tokio::sync::oneshot;
///
/// #[tokio::main]
/// async fn main() {
/// let (tx, mut rx) = oneshot::channel();
///
/// assert!(tx.send("will receive").is_ok());
///
/// rx.close();
///
/// let msg = rx.try_recv().unwrap();
/// assert_eq!(msg, "will receive");
/// }
/// ```
pub fn close(&mut self) {
if let Some(inner) = self.inner.as_ref() {
inner.close();
#[cfg(all(tokio_unstable, feature = "tracing"))]
self.resource_span.in_scope(|| {
tracing::trace!(
target: "runtime::resource::state_update",
rx_dropped = true,
rx_dropped.op = "override",
)
});
}
}
/// Attempts to receive a value.
///
/// If a pending value exists in the channel, it is returned. If no value
/// has been sent, the current task **will not** be registered for
/// future notification.
///
/// This function is useful to call from outside the context of an
/// asynchronous task.
///
/// Note that unlike the `poll` method, the `try_recv` method cannot fail
/// spuriously. Any send or close event that happens before this call to
/// `try_recv` will be correctly returned to the caller.
///
/// # Return
///
/// - `Ok(T)` if a value is pending in the channel.
/// - `Err(TryRecvError::Empty)` if no value has been sent yet.
/// - `Err(TryRecvError::Closed)` if the sender has dropped without sending
/// a value, or if the message has already been received.
///
/// # Examples
///
/// `try_recv` before a value is sent, then after.
///
/// ```
/// use tokio::sync::oneshot;
/// use tokio::sync::oneshot::error::TryRecvError;
///
/// #[tokio::main]
/// async fn main() {
/// let (tx, mut rx) = oneshot::channel();
///
/// match rx.try_recv() {
/// // The channel is currently empty
/// Err(TryRecvError::Empty) => {}
/// _ => unreachable!(),
/// }
///
/// // Send a value
/// tx.send("hello").unwrap();
///
/// match rx.try_recv() {
/// Ok(value) => assert_eq!(value, "hello"),
/// _ => unreachable!(),
/// }
/// }
/// ```
///
/// `try_recv` when the sender dropped before sending a value
///
/// ```
/// use tokio::sync::oneshot;
/// use tokio::sync::oneshot::error::TryRecvError;
///
/// #[tokio::main]
/// async fn main() {
/// let (tx, mut rx) = oneshot::channel::<()>();
///
/// drop(tx);
///
/// match rx.try_recv() {
/// // The channel will never receive a value.
/// Err(TryRecvError::Closed) => {}
/// _ => unreachable!(),
/// }
/// }
/// ```
pub fn try_recv(&mut self) -> Result<T, TryRecvError> {
let result = if let Some(inner) = self.inner.as_ref() {
let state = State::load(&inner.state, Acquire);
if state.is_complete() {
// SAFETY: If `state.is_complete()` returns true, then the
// `VALUE_SENT` bit has been set and the sender side of the
// channel will no longer attempt to access the inner
// `UnsafeCell`. Therefore, it is now safe for us to access the
// cell.
match unsafe { inner.consume_value() } {
Some(value) => {
#[cfg(all(tokio_unstable, feature = "tracing"))]
self.resource_span.in_scope(|| {
tracing::trace!(
target: "runtime::resource::state_update",
value_received = true,
value_received.op = "override",
)
});
Ok(value)
}
None => Err(TryRecvError::Closed),
}
} else if state.is_closed() {
Err(TryRecvError::Closed)
} else {
// Not ready, this does not clear `inner`
return Err(TryRecvError::Empty);
}
} else {
Err(TryRecvError::Closed)
};
self.inner = None;
result
}
/// Blocking receive to call outside of asynchronous contexts.
///
/// # Panics
///
/// This function panics if called within an asynchronous execution
/// context.
///
/// # Examples
///
/// ```
/// use std::thread;
/// use tokio::sync::oneshot;
///
/// #[tokio::main]
/// async fn main() {
/// let (tx, rx) = oneshot::channel::<u8>();
///
/// let sync_code = thread::spawn(move || {
/// assert_eq!(Ok(10), rx.blocking_recv());
/// });
///
/// let _ = tx.send(10);
/// sync_code.join().unwrap();
/// }
/// ```
#[track_caller]
#[cfg(feature = "sync")]
#[cfg_attr(docsrs, doc(alias = "recv_blocking"))]
pub fn blocking_recv(self) -> Result<T, RecvError> {
crate::future::block_on(self)
}
}
impl<T> Drop for Receiver<T> {
fn drop(&mut self) {
if let Some(inner) = self.inner.as_ref() {
inner.close();
#[cfg(all(tokio_unstable, feature = "tracing"))]
self.resource_span.in_scope(|| {
tracing::trace!(
target: "runtime::resource::state_update",
rx_dropped = true,
rx_dropped.op = "override",
)
});
}
}
}
impl<T> Future for Receiver<T> {
type Output = Result<T, RecvError>;
fn poll(mut self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Self::Output> {
// If `inner` is `None`, then `poll()` has already completed.
#[cfg(all(tokio_unstable, feature = "tracing"))]
let _res_span = self.resource_span.clone().entered();
#[cfg(all(tokio_unstable, feature = "tracing"))]
let _ao_span = self.async_op_span.clone().entered();
#[cfg(all(tokio_unstable, feature = "tracing"))]
let _ao_poll_span = self.async_op_poll_span.clone().entered();
let ret = if let Some(inner) = self.as_ref().get_ref().inner.as_ref() {
#[cfg(all(tokio_unstable, feature = "tracing"))]
let res = ready!(trace_poll_op!("poll_recv", inner.poll_recv(cx)))?;
#[cfg(any(not(tokio_unstable), not(feature = "tracing")))]
let res = ready!(inner.poll_recv(cx))?;
res
} else {
panic!("called after complete");
};
self.inner = None;
Ready(Ok(ret))
}
}
impl<T> Inner<T> {
fn complete(&self) -> bool {
let prev = State::set_complete(&self.state);
if prev.is_closed() {
return false;
}
if prev.is_rx_task_set() {
// TODO: Consume waker?
unsafe {
self.rx_task.with_task(Waker::wake_by_ref);
}
}
true
}
fn poll_recv(&self, cx: &mut Context<'_>) -> Poll<Result<T, RecvError>> {
ready!(crate::trace::trace_leaf(cx));
// Keep track of task budget
let coop = ready!(crate::runtime::coop::poll_proceed(cx));
// Load the state
let mut state = State::load(&self.state, Acquire);
if state.is_complete() {
coop.made_progress();
match unsafe { self.consume_value() } {
Some(value) => Ready(Ok(value)),
None => Ready(Err(RecvError(()))),
}
} else if state.is_closed() {
coop.made_progress();
Ready(Err(RecvError(())))
} else {
if state.is_rx_task_set() {
let will_notify = unsafe { self.rx_task.will_wake(cx) };
// Check if the task is still the same
if !will_notify {
// Unset the task
state = State::unset_rx_task(&self.state);
if state.is_complete() {
// Set the flag again so that the waker is released in drop
State::set_rx_task(&self.state);
coop.made_progress();
// SAFETY: If `state.is_complete()` returns true, then the
// `VALUE_SENT` bit has been set and the sender side of the
// channel will no longer attempt to access the inner
// `UnsafeCell`. Therefore, it is now safe for us to access the
// cell.
return match unsafe { self.consume_value() } {
Some(value) => Ready(Ok(value)),
None => Ready(Err(RecvError(()))),
};
} else {
unsafe { self.rx_task.drop_task() };
}
}
}
if !state.is_rx_task_set() {
// Attempt to set the task
unsafe {
self.rx_task.set_task(cx);
}
// Update the state
state = State::set_rx_task(&self.state);
if state.is_complete() {
coop.made_progress();
match unsafe { self.consume_value() } {
Some(value) => Ready(Ok(value)),
None => Ready(Err(RecvError(()))),
}
} else {
Pending
}
} else {
Pending
}
}
}
/// Called by `Receiver` to indicate that the value will never be received.
fn close(&self) {
let prev = State::set_closed(&self.state);
if prev.is_tx_task_set() && !prev.is_complete() {
unsafe {
self.tx_task.with_task(Waker::wake_by_ref);
}
}
}
/// Consumes the value. This function does not check `state`.
///
/// # Safety
///
/// Calling this method concurrently on multiple threads will result in a
/// data race. The `VALUE_SENT` state bit is used to ensure that only the
/// sender *or* the receiver will call this method at a given point in time.
/// If `VALUE_SENT` is not set, then only the sender may call this method;
/// if it is set, then only the receiver may call this method.
unsafe fn consume_value(&self) -> Option<T> {
self.value.with_mut(|ptr| (*ptr).take())
}
}
unsafe impl<T: Send> Send for Inner<T> {}
unsafe impl<T: Send> Sync for Inner<T> {}
fn mut_load(this: &mut AtomicUsize) -> usize {
this.with_mut(|v| *v)
}
impl<T> Drop for Inner<T> {
fn drop(&mut self) {
let state = State(mut_load(&mut self.state));
if state.is_rx_task_set() {
unsafe {
self.rx_task.drop_task();
}
}
if state.is_tx_task_set() {
unsafe {
self.tx_task.drop_task();
}
}
}
}
impl<T: fmt::Debug> fmt::Debug for Inner<T> {
fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
use std::sync::atomic::Ordering::Relaxed;
fmt.debug_struct("Inner")
.field("state", &State::load(&self.state, Relaxed))
.finish()
}
}
/// Indicates that a waker for the receiving task has been set.
///
/// # Safety
///
/// If this bit is not set, the `rx_task` field may be uninitialized.
const RX_TASK_SET: usize = 0b00001;
/// Indicates that a value has been stored in the channel's inner `UnsafeCell`.
///
/// # Safety
///
/// This bit controls which side of the channel is permitted to access the
/// `UnsafeCell`. If it is set, the `UnsafeCell` may ONLY be accessed by the
/// receiver. If this bit is NOT set, the `UnsafeCell` may ONLY be accessed by
/// the sender.
const VALUE_SENT: usize = 0b00010;
const CLOSED: usize = 0b00100;
/// Indicates that a waker for the sending task has been set.
///
/// # Safety
///
/// If this bit is not set, the `tx_task` field may be uninitialized.
const TX_TASK_SET: usize = 0b01000;
impl State {
fn new() -> State {
State(0)
}
fn is_complete(self) -> bool {
self.0 & VALUE_SENT == VALUE_SENT
}
fn set_complete(cell: &AtomicUsize) -> State {
// This method is a compare-and-swap loop rather than a fetch-or like
// other `set_$WHATEVER` methods on `State`. This is because we must
// check if the state has been closed before setting the `VALUE_SENT`
// bit.
//
// We don't want to set both the `VALUE_SENT` bit if the `CLOSED`
// bit is already set, because `VALUE_SENT` will tell the receiver that
// it's okay to access the inner `UnsafeCell`. Immediately after calling
// `set_complete`, if the channel was closed, the sender will _also_
// access the `UnsafeCell` to take the value back out, so if a
// `poll_recv` or `try_recv` call is occurring concurrently, both
// threads may try to access the `UnsafeCell` if we were to set the
// `VALUE_SENT` bit on a closed channel.
let mut state = cell.load(Ordering::Relaxed);
loop {
if State(state).is_closed() {
break;
}
// TODO: This could be `Release`, followed by an `Acquire` fence *if*
// the `RX_TASK_SET` flag is set. However, `loom` does not support
// fences yet.
match cell.compare_exchange_weak(
state,
state | VALUE_SENT,
Ordering::AcqRel,
Ordering::Acquire,
) {
Ok(_) => break,
Err(actual) => state = actual,
}
}
State(state)
}
fn is_rx_task_set(self) -> bool {
self.0 & RX_TASK_SET == RX_TASK_SET
}
fn set_rx_task(cell: &AtomicUsize) -> State {
let val = cell.fetch_or(RX_TASK_SET, AcqRel);
State(val | RX_TASK_SET)
}
fn unset_rx_task(cell: &AtomicUsize) -> State {
let val = cell.fetch_and(!RX_TASK_SET, AcqRel);
State(val & !RX_TASK_SET)
}
fn is_closed(self) -> bool {
self.0 & CLOSED == CLOSED
}
fn set_closed(cell: &AtomicUsize) -> State {
// Acquire because we want all later writes (attempting to poll) to be
// ordered after this.
let val = cell.fetch_or(CLOSED, Acquire);
State(val)
}
fn set_tx_task(cell: &AtomicUsize) -> State {
let val = cell.fetch_or(TX_TASK_SET, AcqRel);
State(val | TX_TASK_SET)
}
fn unset_tx_task(cell: &AtomicUsize) -> State {
let val = cell.fetch_and(!TX_TASK_SET, AcqRel);
State(val & !TX_TASK_SET)
}
fn is_tx_task_set(self) -> bool {
self.0 & TX_TASK_SET == TX_TASK_SET
}
fn as_usize(self) -> usize {
self.0
}
fn load(cell: &AtomicUsize, order: Ordering) -> State {
let val = cell.load(order);
State(val)
}
}
impl fmt::Debug for State {
fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
fmt.debug_struct("State")
.field("is_complete", &self.is_complete())
.field("is_closed", &self.is_closed())
.field("is_rx_task_set", &self.is_rx_task_set())
.field("is_tx_task_set", &self.is_tx_task_set())
.finish()
}
}