Source code
Revision control
Copy as Markdown
Other Tools
// Licensed under the Apache License, Version 2.0 <LICENSE-APACHE or
// option. This file may not be copied, modified, or distributed
// except according to those terms.
// Tracks possibly-redundant flow control signals from other code and converts
// into flow control frames needing to be sent to the remote.
use std::{
fmt::Debug,
ops::{Deref, DerefMut, Index, IndexMut},
};
use neqo_common::{qtrace, Role};
use crate::{
frame::{
FRAME_TYPE_DATA_BLOCKED, FRAME_TYPE_MAX_DATA, FRAME_TYPE_MAX_STREAMS_BIDI,
FRAME_TYPE_MAX_STREAMS_UNIDI, FRAME_TYPE_MAX_STREAM_DATA, FRAME_TYPE_STREAMS_BLOCKED_BIDI,
FRAME_TYPE_STREAMS_BLOCKED_UNIDI, FRAME_TYPE_STREAM_DATA_BLOCKED,
},
packet::PacketBuilder,
recovery::{RecoveryToken, StreamRecoveryToken},
stats::FrameStats,
stream_id::{StreamId, StreamType},
Error, Res,
};
#[derive(Debug)]
pub struct SenderFlowControl<T>
where
T: Debug + Sized,
{
/// The thing that we're counting for.
subject: T,
/// The limit.
limit: u64,
/// How much of that limit we've used.
used: u64,
/// The point at which blocking occurred. This is updated each time
/// the sender decides that it is blocked. It only ever changes
/// when blocking occurs. This ensures that blocking at any given limit
/// is only reported once.
/// Note: All values are one greater than the corresponding `limit` to
/// allow distinguishing between blocking at a limit of 0 and no blocking.
blocked_at: u64,
/// Whether a blocked frame should be sent.
blocked_frame: bool,
}
impl<T> SenderFlowControl<T>
where
T: Debug + Sized,
{
/// Make a new instance with the initial value and subject.
pub fn new(subject: T, initial: u64) -> Self {
Self {
subject,
limit: initial,
used: 0,
blocked_at: 0,
blocked_frame: false,
}
}
/// Update the maximum. Returns `true` if the change was an increase.
pub fn update(&mut self, limit: u64) -> bool {
debug_assert!(limit < u64::MAX);
if limit > self.limit {
self.limit = limit;
self.blocked_frame = false;
true
} else {
false
}
}
/// Consume flow control.
pub fn consume(&mut self, count: usize) {
let amt = u64::try_from(count).unwrap();
debug_assert!(self.used + amt <= self.limit);
self.used += amt;
}
/// Get available flow control.
pub fn available(&self) -> usize {
usize::try_from(self.limit - self.used).unwrap_or(usize::MAX)
}
/// How much data has been written.
pub fn used(&self) -> u64 {
self.used
}
/// Mark flow control as blocked.
/// This only does something if the current limit exceeds the last reported blocking limit.
pub fn blocked(&mut self) {
if self.limit >= self.blocked_at {
self.blocked_at = self.limit + 1;
self.blocked_frame = true;
}
}
/// Return whether a blocking frame needs to be sent.
/// This is `Some` with the active limit if `blocked` has been called,
/// if a blocking frame has not been sent (or it has been lost), and
/// if the blocking condition remains.
fn blocked_needed(&self) -> Option<u64> {
if self.blocked_frame && self.limit < self.blocked_at {
Some(self.blocked_at - 1)
} else {
None
}
}
/// Clear the need to send a blocked frame.
fn blocked_sent(&mut self) {
self.blocked_frame = false;
}
/// Mark a blocked frame as having been lost.
/// Only send again if value of `self.blocked_at` hasn't increased since sending.
/// That would imply that the limit has since increased.
pub fn frame_lost(&mut self, limit: u64) {
if self.blocked_at == limit + 1 {
self.blocked_frame = true;
}
}
}
impl SenderFlowControl<()> {
pub fn write_frames(
&mut self,
builder: &mut PacketBuilder,
tokens: &mut Vec<RecoveryToken>,
stats: &mut FrameStats,
) {
if let Some(limit) = self.blocked_needed() {
if builder.write_varint_frame(&[FRAME_TYPE_DATA_BLOCKED, limit]) {
stats.data_blocked += 1;
tokens.push(RecoveryToken::Stream(StreamRecoveryToken::DataBlocked(
limit,
)));
self.blocked_sent();
}
}
}
}
impl SenderFlowControl<StreamId> {
pub fn write_frames(
&mut self,
builder: &mut PacketBuilder,
tokens: &mut Vec<RecoveryToken>,
stats: &mut FrameStats,
) {
if let Some(limit) = self.blocked_needed() {
if builder.write_varint_frame(&[
FRAME_TYPE_STREAM_DATA_BLOCKED,
self.subject.as_u64(),
limit,
]) {
stats.stream_data_blocked += 1;
tokens.push(RecoveryToken::Stream(
StreamRecoveryToken::StreamDataBlocked {
stream_id: self.subject,
limit,
},
));
self.blocked_sent();
}
}
}
}
impl SenderFlowControl<StreamType> {
pub fn write_frames(
&mut self,
builder: &mut PacketBuilder,
tokens: &mut Vec<RecoveryToken>,
stats: &mut FrameStats,
) {
if let Some(limit) = self.blocked_needed() {
let frame = match self.subject {
StreamType::BiDi => FRAME_TYPE_STREAMS_BLOCKED_BIDI,
StreamType::UniDi => FRAME_TYPE_STREAMS_BLOCKED_UNIDI,
};
if builder.write_varint_frame(&[frame, limit]) {
stats.streams_blocked += 1;
tokens.push(RecoveryToken::Stream(StreamRecoveryToken::StreamsBlocked {
stream_type: self.subject,
limit,
}));
self.blocked_sent();
}
}
}
}
#[derive(Debug)]
pub struct ReceiverFlowControl<T>
where
T: Debug + Sized,
{
/// The thing that we're counting for.
subject: T,
/// The maximum amount of items that can be active (e.g., the size of the receive buffer).
max_active: u64,
/// Last max allowed sent.
max_allowed: u64,
/// Item received, but not retired yet.
/// This will be used for byte flow control: each stream will remember is largest byte
/// offset received and session flow control will remember the sum of all bytes consumed
/// by all streams.
consumed: u64,
/// Retired items.
retired: u64,
frame_pending: bool,
}
impl<T> ReceiverFlowControl<T>
where
T: Debug + Sized,
{
/// Make a new instance with the initial value and subject.
pub fn new(subject: T, max: u64) -> Self {
Self {
subject,
max_active: max,
max_allowed: max,
consumed: 0,
retired: 0,
frame_pending: false,
}
}
/// Retired some items and maybe send flow control
/// update.
pub fn retire(&mut self, retired: u64) {
if retired <= self.retired {
return;
}
self.retired = retired;
if self.retired + self.max_active / 2 > self.max_allowed {
self.frame_pending = true;
}
}
/// This function is called when `STREAM_DATA_BLOCKED` frame is received.
/// The flow control will try to send an update if possible.
pub fn send_flowc_update(&mut self) {
if self.retired + self.max_active > self.max_allowed {
self.frame_pending = true;
}
}
pub fn frame_needed(&self) -> bool {
self.frame_pending
}
pub fn next_limit(&self) -> u64 {
self.retired + self.max_active
}
pub fn max_active(&self) -> u64 {
self.max_active
}
pub fn frame_lost(&mut self, maximum_data: u64) {
if maximum_data == self.max_allowed {
self.frame_pending = true;
}
}
fn frame_sent(&mut self, new_max: u64) {
self.max_allowed = new_max;
self.frame_pending = false;
}
pub fn set_max_active(&mut self, max: u64) {
// If max_active has been increased, send an update immediately.
self.frame_pending |= self.max_active < max;
self.max_active = max;
}
pub fn retired(&self) -> u64 {
self.retired
}
pub fn consumed(&self) -> u64 {
self.consumed
}
}
impl ReceiverFlowControl<()> {
pub fn write_frames(
&mut self,
builder: &mut PacketBuilder,
tokens: &mut Vec<RecoveryToken>,
stats: &mut FrameStats,
) {
if !self.frame_needed() {
return;
}
let max_allowed = self.next_limit();
if builder.write_varint_frame(&[FRAME_TYPE_MAX_DATA, max_allowed]) {
stats.max_data += 1;
tokens.push(RecoveryToken::Stream(StreamRecoveryToken::MaxData(
max_allowed,
)));
self.frame_sent(max_allowed);
}
}
pub fn add_retired(&mut self, count: u64) {
debug_assert!(self.retired + count <= self.consumed);
self.retired += count;
if self.retired + self.max_active / 2 > self.max_allowed {
self.frame_pending = true;
}
}
pub fn consume(&mut self, count: u64) -> Res<()> {
if self.consumed + count > self.max_allowed {
qtrace!(
"Session RX window exceeded: consumed:{} new:{} limit:{}",
self.consumed,
count,
self.max_allowed
);
return Err(Error::FlowControlError);
}
self.consumed += count;
Ok(())
}
}
impl Default for ReceiverFlowControl<()> {
fn default() -> Self {
Self::new((), 0)
}
}
impl ReceiverFlowControl<StreamId> {
pub fn write_frames(
&mut self,
builder: &mut PacketBuilder,
tokens: &mut Vec<RecoveryToken>,
stats: &mut FrameStats,
) {
if !self.frame_needed() {
return;
}
let max_allowed = self.next_limit();
if builder.write_varint_frame(&[
FRAME_TYPE_MAX_STREAM_DATA,
self.subject.as_u64(),
max_allowed,
]) {
stats.max_stream_data += 1;
tokens.push(RecoveryToken::Stream(StreamRecoveryToken::MaxStreamData {
stream_id: self.subject,
max_data: max_allowed,
}));
self.frame_sent(max_allowed);
}
}
pub fn add_retired(&mut self, count: u64) {
debug_assert!(self.retired + count <= self.consumed);
self.retired += count;
if self.retired + self.max_active / 2 > self.max_allowed {
self.frame_pending = true;
}
}
pub fn set_consumed(&mut self, consumed: u64) -> Res<u64> {
if consumed <= self.consumed {
return Ok(0);
}
if consumed > self.max_allowed {
qtrace!("Stream RX window exceeded: {}", consumed);
return Err(Error::FlowControlError);
}
let new_consumed = consumed - self.consumed;
self.consumed = consumed;
Ok(new_consumed)
}
}
impl Default for ReceiverFlowControl<StreamId> {
fn default() -> Self {
Self::new(StreamId::new(0), 0)
}
}
impl ReceiverFlowControl<StreamType> {
pub fn write_frames(
&mut self,
builder: &mut PacketBuilder,
tokens: &mut Vec<RecoveryToken>,
stats: &mut FrameStats,
) {
if !self.frame_needed() {
return;
}
let max_streams = self.next_limit();
let frame = match self.subject {
StreamType::BiDi => FRAME_TYPE_MAX_STREAMS_BIDI,
StreamType::UniDi => FRAME_TYPE_MAX_STREAMS_UNIDI,
};
if builder.write_varint_frame(&[frame, max_streams]) {
stats.max_streams += 1;
tokens.push(RecoveryToken::Stream(StreamRecoveryToken::MaxStreams {
stream_type: self.subject,
max_streams,
}));
self.frame_sent(max_streams);
}
}
/// Check if received item exceeds the allowed flow control limit.
pub fn check_allowed(&self, new_end: u64) -> bool {
new_end < self.max_allowed
}
/// Retire given amount of additional data.
/// This function will send flow updates immediately.
pub fn add_retired(&mut self, count: u64) {
self.retired += count;
if count > 0 {
self.send_flowc_update();
}
}
}
pub struct RemoteStreamLimit {
streams_fc: ReceiverFlowControl<StreamType>,
next_stream: StreamId,
}
impl RemoteStreamLimit {
pub fn new(stream_type: StreamType, max_streams: u64, role: Role) -> Self {
Self {
streams_fc: ReceiverFlowControl::new(stream_type, max_streams),
// // This is for a stream created by a peer, therefore we use role.remote().
next_stream: StreamId::init(stream_type, role.remote()),
}
}
pub fn is_allowed(&self, stream_id: StreamId) -> bool {
let stream_idx = stream_id.as_u64() >> 2;
self.streams_fc.check_allowed(stream_idx)
}
pub fn is_new_stream(&self, stream_id: StreamId) -> Res<bool> {
if !self.is_allowed(stream_id) {
return Err(Error::StreamLimitError);
}
Ok(stream_id >= self.next_stream)
}
pub fn take_stream_id(&mut self) -> StreamId {
let new_stream = self.next_stream;
self.next_stream.next();
assert!(self.is_allowed(new_stream));
new_stream
}
}
impl Deref for RemoteStreamLimit {
type Target = ReceiverFlowControl<StreamType>;
fn deref(&self) -> &Self::Target {
&self.streams_fc
}
}
impl DerefMut for RemoteStreamLimit {
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.streams_fc
}
}
pub struct RemoteStreamLimits {
bidirectional: RemoteStreamLimit,
unidirectional: RemoteStreamLimit,
}
impl RemoteStreamLimits {
pub fn new(local_max_stream_bidi: u64, local_max_stream_uni: u64, role: Role) -> Self {
Self {
bidirectional: RemoteStreamLimit::new(StreamType::BiDi, local_max_stream_bidi, role),
unidirectional: RemoteStreamLimit::new(StreamType::UniDi, local_max_stream_uni, role),
}
}
}
impl Index<StreamType> for RemoteStreamLimits {
type Output = RemoteStreamLimit;
fn index(&self, idx: StreamType) -> &Self::Output {
match idx {
StreamType::BiDi => &self.bidirectional,
StreamType::UniDi => &self.unidirectional,
}
}
}
impl IndexMut<StreamType> for RemoteStreamLimits {
fn index_mut(&mut self, idx: StreamType) -> &mut Self::Output {
match idx {
StreamType::BiDi => &mut self.bidirectional,
StreamType::UniDi => &mut self.unidirectional,
}
}
}
pub struct LocalStreamLimits {
bidirectional: SenderFlowControl<StreamType>,
unidirectional: SenderFlowControl<StreamType>,
role_bit: u64,
}
impl LocalStreamLimits {
pub fn new(role: Role) -> Self {
Self {
bidirectional: SenderFlowControl::new(StreamType::BiDi, 0),
unidirectional: SenderFlowControl::new(StreamType::UniDi, 0),
role_bit: StreamId::role_bit(role),
}
}
pub fn take_stream_id(&mut self, stream_type: StreamType) -> Option<StreamId> {
let fc = match stream_type {
StreamType::BiDi => &mut self.bidirectional,
StreamType::UniDi => &mut self.unidirectional,
};
if fc.available() > 0 {
let new_stream = fc.used();
fc.consume(1);
let type_bit = match stream_type {
StreamType::BiDi => 0,
StreamType::UniDi => 2,
};
Some(StreamId::from((new_stream << 2) + type_bit + self.role_bit))
} else {
fc.blocked();
None
}
}
}
impl Index<StreamType> for LocalStreamLimits {
type Output = SenderFlowControl<StreamType>;
fn index(&self, idx: StreamType) -> &Self::Output {
match idx {
StreamType::BiDi => &self.bidirectional,
StreamType::UniDi => &self.unidirectional,
}
}
}
impl IndexMut<StreamType> for LocalStreamLimits {
fn index_mut(&mut self, idx: StreamType) -> &mut Self::Output {
match idx {
StreamType::BiDi => &mut self.bidirectional,
StreamType::UniDi => &mut self.unidirectional,
}
}
}
#[cfg(test)]
mod test {
use neqo_common::{Encoder, Role};
use super::{LocalStreamLimits, ReceiverFlowControl, RemoteStreamLimits, SenderFlowControl};
use crate::{
packet::PacketBuilder,
stats::FrameStats,
stream_id::{StreamId, StreamType},
Error,
};
#[test]
fn blocked_at_zero() {
let mut fc = SenderFlowControl::new((), 0);
fc.blocked();
assert_eq!(fc.blocked_needed(), Some(0));
}
#[test]
fn blocked() {
let mut fc = SenderFlowControl::new((), 10);
fc.blocked();
assert_eq!(fc.blocked_needed(), Some(10));
}
#[test]
fn update_consume() {
let mut fc = SenderFlowControl::new((), 10);
fc.consume(10);
assert_eq!(fc.available(), 0);
fc.update(5); // An update lower than the current limit does nothing.
assert_eq!(fc.available(), 0);
fc.update(15);
assert_eq!(fc.available(), 5);
fc.consume(3);
assert_eq!(fc.available(), 2);
}
#[test]
fn update_clears_blocked() {
let mut fc = SenderFlowControl::new((), 10);
fc.blocked();
assert_eq!(fc.blocked_needed(), Some(10));
fc.update(5); // An update lower than the current limit does nothing.
assert_eq!(fc.blocked_needed(), Some(10));
fc.update(11);
assert_eq!(fc.blocked_needed(), None);
}
#[test]
fn lost_blocked_resent() {
let mut fc = SenderFlowControl::new((), 10);
fc.blocked();
fc.blocked_sent();
assert_eq!(fc.blocked_needed(), None);
fc.frame_lost(10);
assert_eq!(fc.blocked_needed(), Some(10));
}
#[test]
fn lost_after_increase() {
let mut fc = SenderFlowControl::new((), 10);
fc.blocked();
fc.blocked_sent();
assert_eq!(fc.blocked_needed(), None);
fc.update(11);
fc.frame_lost(10);
assert_eq!(fc.blocked_needed(), None);
}
#[test]
fn lost_after_higher_blocked() {
let mut fc = SenderFlowControl::new((), 10);
fc.blocked();
fc.blocked_sent();
fc.update(11);
fc.blocked();
assert_eq!(fc.blocked_needed(), Some(11));
fc.blocked_sent();
fc.frame_lost(10);
assert_eq!(fc.blocked_needed(), None);
}
#[test]
fn do_no_need_max_allowed_frame_at_start() {
let fc = ReceiverFlowControl::new((), 0);
assert!(!fc.frame_needed());
}
#[test]
fn max_allowed_after_items_retired() {
let mut fc = ReceiverFlowControl::new((), 100);
fc.retire(49);
assert!(!fc.frame_needed());
fc.retire(51);
assert!(fc.frame_needed());
assert_eq!(fc.next_limit(), 151);
}
#[test]
fn need_max_allowed_frame_after_loss() {
let mut fc = ReceiverFlowControl::new((), 100);
fc.retire(100);
assert!(fc.frame_needed());
assert_eq!(fc.next_limit(), 200);
fc.frame_sent(200);
assert!(!fc.frame_needed());
fc.frame_lost(200);
assert!(fc.frame_needed());
assert_eq!(fc.next_limit(), 200);
}
#[test]
fn no_max_allowed_frame_after_old_loss() {
let mut fc = ReceiverFlowControl::new((), 100);
fc.retire(51);
assert!(fc.frame_needed());
assert_eq!(fc.next_limit(), 151);
fc.frame_sent(151);
assert!(!fc.frame_needed());
fc.retire(102);
assert!(fc.frame_needed());
assert_eq!(fc.next_limit(), 202);
fc.frame_sent(202);
assert!(!fc.frame_needed());
fc.frame_lost(151);
assert!(!fc.frame_needed());
}
#[test]
fn force_send_max_allowed() {
let mut fc = ReceiverFlowControl::new((), 100);
fc.retire(10);
assert!(!fc.frame_needed());
}
#[test]
fn multiple_retries_after_frame_pending_is_set() {
let mut fc = ReceiverFlowControl::new((), 100);
fc.retire(51);
assert!(fc.frame_needed());
assert_eq!(fc.next_limit(), 151);
fc.retire(61);
assert!(fc.frame_needed());
assert_eq!(fc.next_limit(), 161);
fc.retire(88);
assert!(fc.frame_needed());
assert_eq!(fc.next_limit(), 188);
fc.retire(90);
assert!(fc.frame_needed());
assert_eq!(fc.next_limit(), 190);
fc.frame_sent(190);
assert!(!fc.frame_needed());
fc.retire(141);
assert!(fc.frame_needed());
assert_eq!(fc.next_limit(), 241);
fc.frame_sent(241);
assert!(!fc.frame_needed());
}
#[test]
fn new_retired_before_loss() {
let mut fc = ReceiverFlowControl::new((), 100);
fc.retire(51);
assert!(fc.frame_needed());
assert_eq!(fc.next_limit(), 151);
fc.frame_sent(151);
assert!(!fc.frame_needed());
fc.retire(62);
assert!(!fc.frame_needed());
fc.frame_lost(151);
assert!(fc.frame_needed());
assert_eq!(fc.next_limit(), 162);
}
#[test]
fn changing_max_active() {
let mut fc = ReceiverFlowControl::new((), 100);
fc.set_max_active(50);
// There is no MAX_STREAM_DATA frame needed.
assert!(!fc.frame_needed());
// We can still retire more than 50.
fc.retire(60);
// There is no MAX_STREAM_DATA fame needed yet.
assert!(!fc.frame_needed());
fc.retire(76);
assert!(fc.frame_needed());
assert_eq!(fc.next_limit(), 126);
// Increase max_active.
fc.set_max_active(60);
assert!(fc.frame_needed());
assert_eq!(fc.next_limit(), 136);
// We can retire more than 60.
fc.retire(136);
assert!(fc.frame_needed());
assert_eq!(fc.next_limit(), 196);
}
fn remote_stream_limits(role: Role, bidi: u64, unidi: u64) {
let mut fc = RemoteStreamLimits::new(2, 1, role);
assert!(fc[StreamType::BiDi]
.is_new_stream(StreamId::from(bidi))
.unwrap());
assert!(fc[StreamType::BiDi]
.is_new_stream(StreamId::from(bidi + 4))
.unwrap());
assert!(fc[StreamType::UniDi]
.is_new_stream(StreamId::from(unidi))
.unwrap());
// Exceed limits
assert_eq!(
fc[StreamType::BiDi].is_new_stream(StreamId::from(bidi + 8)),
Err(Error::StreamLimitError)
);
assert_eq!(
fc[StreamType::UniDi].is_new_stream(StreamId::from(unidi + 4)),
Err(Error::StreamLimitError)
);
assert_eq!(fc[StreamType::BiDi].take_stream_id(), StreamId::from(bidi));
assert_eq!(
fc[StreamType::BiDi].take_stream_id(),
StreamId::from(bidi + 4)
);
assert_eq!(
fc[StreamType::UniDi].take_stream_id(),
StreamId::from(unidi)
);
fc[StreamType::BiDi].add_retired(1);
fc[StreamType::BiDi].send_flowc_update();
// consume the frame
let mut builder = PacketBuilder::short(Encoder::new(), false, []);
let mut tokens = Vec::new();
fc[StreamType::BiDi].write_frames(&mut builder, &mut tokens, &mut FrameStats::default());
assert_eq!(tokens.len(), 1);
// Now 9 can be a new StreamId.
assert!(fc[StreamType::BiDi]
.is_new_stream(StreamId::from(bidi + 8))
.unwrap());
assert_eq!(
fc[StreamType::BiDi].take_stream_id(),
StreamId::from(bidi + 8)
);
// 13 still exceeds limits
assert_eq!(
fc[StreamType::BiDi].is_new_stream(StreamId::from(bidi + 12)),
Err(Error::StreamLimitError)
);
fc[StreamType::UniDi].add_retired(1);
fc[StreamType::UniDi].send_flowc_update();
// consume the frame
fc[StreamType::UniDi].write_frames(&mut builder, &mut tokens, &mut FrameStats::default());
assert_eq!(tokens.len(), 2);
// Now 7 can be a new StreamId.
assert!(fc[StreamType::UniDi]
.is_new_stream(StreamId::from(unidi + 4))
.unwrap());
assert_eq!(
fc[StreamType::UniDi].take_stream_id(),
StreamId::from(unidi + 4)
);
// 11 exceeds limits
assert_eq!(
fc[StreamType::UniDi].is_new_stream(StreamId::from(unidi + 8)),
Err(Error::StreamLimitError)
);
}
#[test]
fn remote_stream_limits_new_stream_client() {
remote_stream_limits(Role::Client, 1, 3);
}
#[test]
fn remote_stream_limits_new_stream_server() {
remote_stream_limits(Role::Server, 0, 2);
}
#[should_panic(expected = ".is_allowed")]
#[test]
fn remote_stream_limits_asserts_if_limit_exceeded() {
let mut fc = RemoteStreamLimits::new(2, 1, Role::Client);
assert_eq!(fc[StreamType::BiDi].take_stream_id(), StreamId::from(1));
assert_eq!(fc[StreamType::BiDi].take_stream_id(), StreamId::from(5));
_ = fc[StreamType::BiDi].take_stream_id();
}
fn local_stream_limits(role: Role, bidi: u64, unidi: u64) {
let mut fc = LocalStreamLimits::new(role);
fc[StreamType::BiDi].update(2);
fc[StreamType::UniDi].update(1);
// Add streams
assert_eq!(
fc.take_stream_id(StreamType::BiDi).unwrap(),
StreamId::from(bidi)
);
assert_eq!(
fc.take_stream_id(StreamType::BiDi).unwrap(),
StreamId::from(bidi + 4)
);
assert_eq!(fc.take_stream_id(StreamType::BiDi), None);
assert_eq!(
fc.take_stream_id(StreamType::UniDi).unwrap(),
StreamId::from(unidi)
);
assert_eq!(fc.take_stream_id(StreamType::UniDi), None);
// Increase limit
fc[StreamType::BiDi].update(3);
fc[StreamType::UniDi].update(2);
assert_eq!(
fc.take_stream_id(StreamType::BiDi).unwrap(),
StreamId::from(bidi + 8)
);
assert_eq!(fc.take_stream_id(StreamType::BiDi), None);
assert_eq!(
fc.take_stream_id(StreamType::UniDi).unwrap(),
StreamId::from(unidi + 4)
);
assert_eq!(fc.take_stream_id(StreamType::UniDi), None);
}
#[test]
fn local_stream_limits_new_stream_client() {
local_stream_limits(Role::Client, 0, 2);
}
#[test]
fn local_stream_limits_new_stream_server() {
local_stream_limits(Role::Server, 1, 3);
}
}