Source code
Revision control
Copy as Markdown
Other Tools
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
/*
* HAWK is an HTTP authentication scheme using a message authentication code
* (MAC) algorithm to provide partial HTTP request cryptographic verification.
*
*
* With HAWK, it is essential that the clocks on clients and server not have an
* absolute delta of greater than one minute, as the HAWK protocol uses
* timestamps to reduce the possibility of replay attacks. However, it is
* likely that some clients' clocks will be more than a little off, especially
* in mobile devices, which would break HAWK-based services (like sync and
* firefox accounts) for those clients.
*
* This library provides a stateful HAWK client that calculates (roughly) the
* clock delta on the client vs the server. The library provides an interface
* for deriving HAWK credentials and making HAWK-authenticated REST requests to
* a single remote server. Therefore, callers who want to interact with
* multiple HAWK services should instantiate one HawkClient per service.
*/
// log.appender.dump should be one of "Fatal", "Error", "Warn", "Info", "Config",
// "Debug", "Trace" or "All". If none is specified, "Error" will be used by
// default.
// Note however that Sync will also add this log to *its* DumpAppender, so
// in a Sync context it shouldn't be necessary to adjust this - however, that
// also means error logs are likely to be dump'd twice but that's OK.
const PREF_LOG_LEVEL = "services.common.hawk.log.appender.dump";
// A pref that can be set so "sensitive" information (eg, personally
// identifiable info, credentials, etc) will be logged.
const PREF_LOG_SENSITIVE_DETAILS = "services.common.hawk.log.sensitive";
const lazy = {};
ChromeUtils.defineLazyGetter(lazy, "log", function () {
let log = Log.repository.getLogger("Hawk");
// We set the log itself to "debug" and set the level from the preference to
// the appender. This allows other things to send the logs to different
// appenders, while still allowing the pref to control what is seen via dump()
log.level = Log.Level.Debug;
let appender = new Log.DumpAppender();
log.addAppender(appender);
appender.level = Log.Level.Error;
try {
let level =
Services.prefs.getPrefType(PREF_LOG_LEVEL) ==
Ci.nsIPrefBranch.PREF_STRING &&
Services.prefs.getStringPref(PREF_LOG_LEVEL);
appender.level = Log.Level[level] || Log.Level.Error;
} catch (e) {
log.error(e);
}
return log;
});
// A boolean to indicate if personally identifiable information (or anything
// else sensitive, such as credentials) should be logged.
ChromeUtils.defineLazyGetter(lazy, "logPII", function () {
try {
return Services.prefs.getBoolPref(PREF_LOG_SENSITIVE_DETAILS);
} catch (_) {
return false;
}
});
/*
* A general purpose client for making HAWK authenticated requests to a single
* host. Keeps track of the clock offset between the client and the host for
* computation of the timestamp in the HAWK Authorization header.
*
* Clients should create one HawkClient object per each server they wish to
* interact with.
*
* @param host
* The url of the host
*/
export var HawkClient = function (host) {
this.host = host;
// Clock offset in milliseconds between our client's clock and the date
// reported in responses from our host.
this._localtimeOffsetMsec = 0;
};
HawkClient.prototype = {
/*
* Construct an error message for a response. Private.
*
* @param restResponse
* A RESTResponse object from a RESTRequest
*
* @param error
* A string or object describing the error
*/
_constructError(restResponse, error) {
let errorObj = {
error,
// This object is likely to be JSON.stringify'd, but neither Error()
// objects nor Components.Exception objects do the right thing there,
// so we add a new element which is simply the .toString() version of
// the error object, so it does appear in JSON'd values.
errorString: error.toString(),
message: restResponse.statusText,
code: restResponse.status,
errno: restResponse.status,
toString() {
return this.code + ": " + this.message;
},
};
let retryAfter =
restResponse.headers && restResponse.headers["retry-after"];
retryAfter = retryAfter ? parseInt(retryAfter) : retryAfter;
if (retryAfter) {
errorObj.retryAfter = retryAfter;
// and notify observers of the retry interval
if (this.observerPrefix) {
Observers.notify(this.observerPrefix + ":backoff:interval", retryAfter);
}
}
return errorObj;
},
/*
*
* Update clock offset by determining difference from date gives in the (RFC
* 1123) Date header of a server response. Because HAWK tolerates a window
* of one minute of clock skew (so two minutes total since the skew can be
* positive or negative), the simple method of calculating offset here is
* probably good enough. We keep the value in milliseconds to make life
* easier, even though the value will not have millisecond accuracy.
*
* @param dateString
* An RFC 1123 date string (e.g., "Mon, 13 Jan 2014 21:45:06 GMT")
*
* For HAWK clock skew and replay protection, see
*/
_updateClockOffset(dateString) {
try {
let serverDateMsec = Date.parse(dateString);
this._localtimeOffsetMsec = serverDateMsec - this.now();
lazy.log.debug(
"Clock offset vs " + this.host + ": " + this._localtimeOffsetMsec
);
} catch (err) {
lazy.log.warn("Bad date header in server response: " + dateString);
}
},
/*
* Get the current clock offset in milliseconds.
*
* The offset is the number of milliseconds that must be added to the client
* clock to make it equal to the server clock. For example, if the client is
* five minutes ahead of the server, the localtimeOffsetMsec will be -300000.
*/
get localtimeOffsetMsec() {
return this._localtimeOffsetMsec;
},
/*
* return current time in milliseconds
*/
now() {
return Date.now();
},
/* A general method for sending raw RESTRequest calls authorized using HAWK
*
* @param path
* API endpoint path
* @param method
* The HTTP request method
* @param credentials
* Hawk credentials
* @param payloadObj
* An object that can be encodable as JSON as the payload of the
* request
* @param extraHeaders
* An object with header/value pairs to send with the request.
* @return Promise
* Returns a promise that resolves to the response of the API call,
* or is rejected with an error. If the server response can be parsed
* as JSON and contains an 'error' property, the promise will be
* rejected with this JSON-parsed response.
*/
async request(
path,
method,
credentials = null,
payloadObj = {},
extraHeaders = {},
retryOK = true
) {
method = method.toLowerCase();
let uri = this.host + path;
let extra = {
now: this.now(),
localtimeOffsetMsec: this.localtimeOffsetMsec,
headers: extraHeaders,
};
let request = this.newHAWKAuthenticatedRESTRequest(uri, credentials, extra);
let error;
let restResponse = await request[method](payloadObj).catch(e => {
// Keep a reference to the error, log a message about it, and return the
// response anyway.
error = e;
lazy.log.warn("hawk request error", error);
return request.response;
});
// This shouldn't happen anymore, but it's not exactly difficult to handle.
if (!restResponse) {
throw error;
}
let status = restResponse.status;
lazy.log.debug(
"(Response) " +
path +
": code: " +
status +
" - Status text: " +
restResponse.statusText
);
if (lazy.logPII) {
lazy.log.debug("Response text", restResponse.body);
}
// All responses may have backoff headers, which are a server-side safety
// valve to allow slowing down clients without hurting performance.
this._maybeNotifyBackoff(restResponse, "x-weave-backoff");
this._maybeNotifyBackoff(restResponse, "x-backoff");
if (error) {
// When things really blow up, reconstruct an error object that follows
// the general format of the server on error responses.
throw this._constructError(restResponse, error);
}
this._updateClockOffset(restResponse.headers.date);
if (status === 401 && retryOK && !("retry-after" in restResponse.headers)) {
// Retry once if we were rejected due to a bad timestamp.
// Clock offset is adjusted already in the top of this function.
lazy.log.debug("Received 401 for " + path + ": retrying");
return this.request(
path,
method,
credentials,
payloadObj,
extraHeaders,
false
);
}
// If the server returned a json error message, use it in the rejection
// of the promise.
//
// In the case of a 401, in which we are probably being rejected for a
// bad timestamp, retry exactly once, during which time clock offset will
// be adjusted.
let jsonResponse = {};
try {
jsonResponse = JSON.parse(restResponse.body);
} catch (notJSON) {}
let okResponse = 200 <= status && status < 300;
if (!okResponse || jsonResponse.error) {
if (jsonResponse.error) {
throw jsonResponse;
}
throw this._constructError(restResponse, "Request failed");
}
// It's up to the caller to know how to decode the response.
// We just return the whole response.
return restResponse;
},
/*
* The prefix used for all notifications sent by this module. This
* allows the handler of notifications to be sure they are handling
* notifications for the service they expect.
*
* If not set, no notifications will be sent.
*/
observerPrefix: null,
// Given an optional header value, notify that a backoff has been requested.
_maybeNotifyBackoff(response, headerName) {
if (!this.observerPrefix || !response.headers) {
return;
}
let headerVal = response.headers[headerName];
if (!headerVal) {
return;
}
let backoffInterval;
try {
backoffInterval = parseInt(headerVal, 10);
} catch (ex) {
lazy.log.error(
"hawkclient response had invalid backoff value in '" +
headerName +
"' header: " +
headerVal
);
return;
}
Observers.notify(
this.observerPrefix + ":backoff:interval",
backoffInterval
);
},
// override points for testing.
newHAWKAuthenticatedRESTRequest(uri, credentials, extra) {
return new HAWKAuthenticatedRESTRequest(uri, credentials, extra);
},
};