DXR is a code search and navigation tool aimed at making sense of large projects. It supports full-text and regex searches as well as structural queries.

Header

Mercurial (5350524bb654)

VCS Links

Line Code
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169
/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */

/* rendering object for css3 multi-column layout */

#include "mozilla/Unused.h"
#include "nsColumnSetFrame.h"
#include "nsCSSRendering.h"
#include "nsDisplayList.h"

using namespace mozilla;
using namespace mozilla::layout;

/**
 * Tracking issues:
 *
 * XXX cursor movement around the top and bottom of colums seems to make the editor
 * lose the caret.
 *
 * XXX should we support CSS columns applied to table elements?
 */
nsContainerFrame*
NS_NewColumnSetFrame(nsIPresShell* aPresShell, nsStyleContext* aContext, nsFrameState aStateFlags)
{
  nsColumnSetFrame* it = new (aPresShell) nsColumnSetFrame(aContext);
  it->AddStateBits(aStateFlags | NS_BLOCK_MARGIN_ROOT);
  return it;
}

NS_IMPL_FRAMEARENA_HELPERS(nsColumnSetFrame)

nsColumnSetFrame::nsColumnSetFrame(nsStyleContext* aContext)
  : nsContainerFrame(aContext), mLastBalanceBSize(NS_INTRINSICSIZE),
    mLastFrameStatus(NS_FRAME_COMPLETE)
{
}

nsIAtom*
nsColumnSetFrame::GetType() const
{
  return nsGkAtoms::columnSetFrame;
}

static void
PaintColumnRule(nsIFrame* aFrame, nsRenderingContext* aCtx,
                const nsRect& aDirtyRect, nsPoint aPt)
{
  static_cast<nsColumnSetFrame*>(aFrame)->PaintColumnRule(aCtx, aDirtyRect, aPt);
}

void
nsColumnSetFrame::PaintColumnRule(nsRenderingContext* aCtx,
                                  const nsRect& aDirtyRect,
                                  const nsPoint& aPt)
{
  nsIFrame* child = mFrames.FirstChild();
  if (!child)
    return;  // no columns

  nsIFrame* nextSibling = child->GetNextSibling();
  if (!nextSibling)
    return;  // 1 column only - this means no gap to draw on

  WritingMode wm = GetWritingMode();
  bool isVertical = wm.IsVertical();
  bool isRTL = !wm.IsBidiLTR();
  const nsStyleColumn* colStyle = StyleColumn();

  uint8_t ruleStyle;
  // Per spec, inset => ridge and outset => groove
  if (colStyle->mColumnRuleStyle == NS_STYLE_BORDER_STYLE_INSET)
    ruleStyle = NS_STYLE_BORDER_STYLE_RIDGE;
  else if (colStyle->mColumnRuleStyle == NS_STYLE_BORDER_STYLE_OUTSET)
    ruleStyle = NS_STYLE_BORDER_STYLE_GROOVE;
  else
    ruleStyle = colStyle->mColumnRuleStyle;

  nsPresContext* presContext = PresContext();
  nscoord ruleWidth = colStyle->GetComputedColumnRuleWidth();
  if (!ruleWidth)
    return;

  nscolor ruleColor =
    GetVisitedDependentColor(eCSSProperty_column_rule_color);

  // In order to re-use a large amount of code, we treat the column rule as a border.
  // We create a new border style object and fill in all the details of the column rule as
  // the left border. PaintBorder() does all the rendering for us, so we not
  // only save an enormous amount of code but we'll support all the line styles that
  // we support on borders!
  nsStyleBorder border(presContext);
  Sides skipSides;
  if (isVertical) {
    border.SetBorderWidth(NS_SIDE_TOP, ruleWidth);
    border.SetBorderStyle(NS_SIDE_TOP, ruleStyle);
    border.mBorderTopColor = StyleComplexColor::FromColor(ruleColor);
    skipSides |= mozilla::eSideBitsLeftRight;
    skipSides |= mozilla::eSideBitsBottom;
  } else {
    border.SetBorderWidth(NS_SIDE_LEFT, ruleWidth);
    border.SetBorderStyle(NS_SIDE_LEFT, ruleStyle);
    border.mBorderLeftColor = StyleComplexColor::FromColor(ruleColor);
    skipSides |= mozilla::eSideBitsTopBottom;
    skipSides |= mozilla::eSideBitsRight;
  }

  // Get our content rect as an absolute coordinate, not relative to
  // our parent (which is what the X and Y normally is)
  nsRect contentRect = GetContentRect() - GetRect().TopLeft() + aPt;
  nsSize ruleSize = isVertical ? nsSize(contentRect.width, ruleWidth)
                               : nsSize(ruleWidth, contentRect.height);

  while (nextSibling) {
    // The frame tree goes RTL in RTL.
    // The |prevFrame| and |nextFrame| frames here are the visually preceding
    // (left/above) and following (right/below) frames, not in logical writing-
    // mode direction.
    nsIFrame* prevFrame = isRTL ? nextSibling : child;
    nsIFrame* nextFrame = isRTL ? child : nextSibling;

    // Each child frame's position coordinates is actually relative to this
    // nsColumnSetFrame.
    // linePt will be at the top-left edge to paint the line.
    nsPoint linePt;
    if (isVertical) {
      nscoord edgeOfPrev = prevFrame->GetRect().YMost() + aPt.y;
      nscoord edgeOfNext = nextFrame->GetRect().Y() + aPt.y;
      linePt = nsPoint(contentRect.x,
                       (edgeOfPrev + edgeOfNext - ruleSize.height) / 2);
    } else {
      nscoord edgeOfPrev = prevFrame->GetRect().XMost() + aPt.x;
      nscoord edgeOfNext = nextFrame->GetRect().X() + aPt.x;
      linePt = nsPoint((edgeOfPrev + edgeOfNext - ruleSize.width) / 2,
                       contentRect.y);
    }

    nsRect lineRect(linePt, ruleSize);

    // Assert that we're not drawing a border-image here; if we were, we
    // couldn't ignore the DrawResult that PaintBorderWithStyleBorder returns.
    MOZ_ASSERT(border.mBorderImageSource.GetType() == eStyleImageType_Null);

    Unused <<
      nsCSSRendering::PaintBorderWithStyleBorder(presContext, *aCtx, this,
                                                 aDirtyRect, lineRect, border,
                                                 StyleContext(),
                                                 PaintBorderFlags::SYNC_DECODE_IMAGES,
                                                 skipSides);

    child = nextSibling;
    nextSibling = nextSibling->GetNextSibling();
  }
}

static nscoord
GetAvailableContentISize(const ReflowInput& aReflowInput)
{
  if (aReflowInput.AvailableISize() == NS_INTRINSICSIZE) {
    return NS_INTRINSICSIZE;
  }

  WritingMode wm = aReflowInput.GetWritingMode();
  nscoord borderPaddingISize =
    aReflowInput.ComputedLogicalBorderPadding().IStartEnd(wm);
  return std::max(0, aReflowInput.AvailableISize() - borderPaddingISize);
}

nscoord
nsColumnSetFrame::GetAvailableContentBSize(const ReflowInput& aReflowInput)
{
  if (aReflowInput.AvailableBSize() == NS_INTRINSICSIZE) {
    return NS_INTRINSICSIZE;
  }

  WritingMode wm = aReflowInput.GetWritingMode();
  LogicalMargin bp = aReflowInput.ComputedLogicalBorderPadding();
  bp.ApplySkipSides(GetLogicalSkipSides(&aReflowInput));
  bp.BEnd(wm) = aReflowInput.ComputedLogicalBorderPadding().BEnd(wm);
  return std::max(0, aReflowInput.AvailableBSize() - bp.BStartEnd(wm));
}

static nscoord
GetColumnGap(nsColumnSetFrame*    aFrame,
             const nsStyleColumn* aColStyle)
{
  if (eStyleUnit_Normal == aColStyle->mColumnGap.GetUnit())
    return aFrame->StyleFont()->mFont.size;
  if (eStyleUnit_Coord == aColStyle->mColumnGap.GetUnit()) {
    nscoord colGap = aColStyle->mColumnGap.GetCoordValue();
    NS_ASSERTION(colGap >= 0, "negative column gap");
    return colGap;
  }

  NS_NOTREACHED("Unknown gap type");
  return 0;
}

nsColumnSetFrame::ReflowConfig
nsColumnSetFrame::ChooseColumnStrategy(const ReflowInput& aReflowInput,
                                       bool aForceAuto = false,
                                       nscoord aFeasibleBSize = NS_INTRINSICSIZE,
                                       nscoord aInfeasibleBSize = 0)
{
  nscoord knownFeasibleBSize = aFeasibleBSize;
  nscoord knownInfeasibleBSize = aInfeasibleBSize;

  const nsStyleColumn* colStyle = StyleColumn();
  nscoord availContentISize = GetAvailableContentISize(aReflowInput);
  if (aReflowInput.ComputedISize() != NS_INTRINSICSIZE) {
    availContentISize = aReflowInput.ComputedISize();
  }

  nscoord consumedBSize = GetConsumedBSize();

  // The effective computed height is the height of the current continuation
  // of the column set frame. This should be the same as the computed height
  // if we have an unconstrained available height.
  nscoord computedBSize = GetEffectiveComputedBSize(aReflowInput,
                                                    consumedBSize);
  nscoord colBSize = GetAvailableContentBSize(aReflowInput);

  if (aReflowInput.ComputedBSize() != NS_INTRINSICSIZE) {
    colBSize = aReflowInput.ComputedBSize();
  } else if (aReflowInput.ComputedMaxBSize() != NS_INTRINSICSIZE) {
    colBSize = std::min(colBSize, aReflowInput.ComputedMaxBSize());
  }

  nscoord colGap = GetColumnGap(this, colStyle);
  int32_t numColumns = colStyle->mColumnCount;

  // If column-fill is set to 'balance', then we want to balance the columns.
  const bool isBalancing = colStyle->mColumnFill == NS_STYLE_COLUMN_FILL_BALANCE
                           && !aForceAuto;
  if (isBalancing) {
    const uint32_t MAX_NESTED_COLUMN_BALANCING = 2;
    uint32_t cnt = 0;
    for (const ReflowInput* rs = aReflowInput.mParentReflowInput;
         rs && cnt < MAX_NESTED_COLUMN_BALANCING; rs = rs->mParentReflowInput) {
      if (rs->mFlags.mIsColumnBalancing) {
        ++cnt;
      }
    }
    if (cnt == MAX_NESTED_COLUMN_BALANCING) {
      numColumns = 1;
    }
  }

  nscoord colISize;
  // In vertical writing-mode, "column-width" (inline size) will actually be
  // physical height, but its CSS name is still column-width.
  if (colStyle->mColumnWidth.GetUnit() == eStyleUnit_Coord) {
    colISize = colStyle->mColumnWidth.GetCoordValue();
    NS_ASSERTION(colISize >= 0, "negative column width");
    // Reduce column count if necessary to make columns fit in the
    // available width. Compute max number of columns that fit in
    // availContentISize, satisfying colGap*(maxColumns - 1) +
    // colISize*maxColumns <= availContentISize
    if (availContentISize != NS_INTRINSICSIZE && colGap + colISize > 0
        && numColumns > 0) {
      // This expression uses truncated rounding, which is what we
      // want
      int32_t maxColumns =
        std::min(nscoord(nsStyleColumn::kMaxColumnCount),
                 (availContentISize + colGap) / (colGap + colISize));
      numColumns = std::max(1, std::min(numColumns, maxColumns));
    }
  } else if (numColumns > 0 && availContentISize != NS_INTRINSICSIZE) {
    nscoord iSizeMinusGaps = availContentISize - colGap * (numColumns - 1);
    colISize = iSizeMinusGaps / numColumns;
  } else {
    colISize = NS_INTRINSICSIZE;
  }
  // Take care of the situation where there's only one column but it's
  // still too wide
  colISize = std::max(1, std::min(colISize, availContentISize));

  nscoord expectedISizeLeftOver = 0;

  if (colISize != NS_INTRINSICSIZE && availContentISize != NS_INTRINSICSIZE) {
    // distribute leftover space

    // First, determine how many columns will be showing if the column
    // count is auto
    if (numColumns <= 0) {
      // choose so that colGap*(nominalColumnCount - 1) +
      // colISize*nominalColumnCount is nearly availContentISize
      // make sure to round down
      if (colGap + colISize > 0) {
        numColumns = (availContentISize + colGap) / (colGap + colISize);
        // The number of columns should never exceed kMaxColumnCount.
        numColumns = std::min(nscoord(nsStyleColumn::kMaxColumnCount),
                              numColumns);
      }
      if (numColumns <= 0) {
        numColumns = 1;
      }
    }

    // Compute extra space and divide it among the columns
    nscoord extraSpace =
      std::max(0, availContentISize - (colISize * numColumns +
                                       colGap * (numColumns - 1)));
    nscoord extraToColumns = extraSpace / numColumns;
    colISize += extraToColumns;
    expectedISizeLeftOver = extraSpace - (extraToColumns * numColumns);
  }

  if (isBalancing) {
    if (numColumns <= 0) {
      // Hmm, auto column count, column width or available width is unknown,
      // and balancing is required. Let's just use one column then.
      numColumns = 1;
    }
    colBSize = std::min(mLastBalanceBSize, colBSize);
  } else {
    // This is the case when the column-fill property is set to 'auto'.
    // No balancing, so don't limit the column count
    numColumns = INT32_MAX;

    // XXX_jwir3: If a page's height is set to 0, we could continually
    //            create continuations, resulting in an infinite loop, since
    //            no progress is ever made. This is an issue with the spec
    //            (css3-multicol, css3-page, and css3-break) that is
    //            unresolved as of 27 Feb 2013. For the time being, we set this
    //            to have a minimum of 1 css px. Once a resolution is made
    //            on what minimum to have for a page height, we may need to
    //            change this value to match the appropriate spec(s).
    colBSize = std::max(colBSize, nsPresContext::CSSPixelsToAppUnits(1));
  }

#ifdef DEBUG_roc
  printf("*** nsColumnSetFrame::ChooseColumnStrategy: numColumns=%d, colISize=%d,"
         " expectedISizeLeftOver=%d, colBSize=%d, colGap=%d\n",
         numColumns, colISize, expectedISizeLeftOver, colBSize, colGap);
#endif
  ReflowConfig config = { numColumns, colISize, expectedISizeLeftOver, colGap,
                          colBSize, isBalancing, knownFeasibleBSize,
                          knownInfeasibleBSize, computedBSize, consumedBSize };
  return config;
}

bool
nsColumnSetFrame::ReflowColumns(ReflowOutput& aDesiredSize,
                                const ReflowInput& aReflowInput,
                                nsReflowStatus& aReflowStatus,
                                ReflowConfig& aConfig,
                                bool aLastColumnUnbounded,
                                nsCollapsingMargin* aCarriedOutBEndMargin,
                                ColumnBalanceData& aColData)
{
  bool feasible = ReflowChildren(aDesiredSize, aReflowInput,
                                 aReflowStatus, aConfig, aLastColumnUnbounded,
                                 aCarriedOutBEndMargin, aColData);

  if (aColData.mHasExcessBSize) {
    aConfig = ChooseColumnStrategy(aReflowInput, true);

    // We need to reflow our children again one last time, otherwise we might
    // end up with a stale column height for some of our columns, since we
    // bailed out of balancing.
    feasible = ReflowChildren(aDesiredSize, aReflowInput, aReflowStatus,
                              aConfig, aLastColumnUnbounded,
                              aCarriedOutBEndMargin, aColData);
  }

  return feasible;
}

static void MoveChildTo(nsIFrame* aChild, LogicalPoint aOrigin,
                        WritingMode aWM, const nsSize& aContainerSize)
{
  if (aChild->GetLogicalPosition(aWM, aContainerSize) == aOrigin) {
    return;
  }

  aChild->SetPosition(aWM, aOrigin, aContainerSize);
  nsContainerFrame::PlaceFrameView(aChild);
}

nscoord
nsColumnSetFrame::GetMinISize(nsRenderingContext *aRenderingContext)
{
  nscoord iSize = 0;
  DISPLAY_MIN_WIDTH(this, iSize);
  if (mFrames.FirstChild()) {
    iSize = mFrames.FirstChild()->GetMinISize(aRenderingContext);
  }
  const nsStyleColumn* colStyle = StyleColumn();
  nscoord colISize;
  if (colStyle->mColumnWidth.GetUnit() == eStyleUnit_Coord) {
    colISize = colStyle->mColumnWidth.GetCoordValue();
    // As available width reduces to zero, we reduce our number of columns
    // to one, and don't enforce the column width, so just return the min
    // of the child's min-width with any specified column width.
    iSize = std::min(iSize, colISize);
  } else {
    NS_ASSERTION(colStyle->mColumnCount > 0,
                 "column-count and column-width can't both be auto");
    // As available width reduces to zero, we still have mColumnCount columns,
    // so multiply the child's min-width by the number of columns (n) and
    // include n-1 column gaps.
    colISize = iSize;
    iSize *= colStyle->mColumnCount;
    nscoord colGap = GetColumnGap(this, colStyle);
    iSize += colGap * (colStyle->mColumnCount - 1);
    // The multiplication above can make 'width' negative (integer overflow),
    // so use std::max to protect against that.
    iSize = std::max(iSize, colISize);
  }
  // XXX count forced column breaks here? Maybe we should return the child's
  // min-width times the minimum number of columns.
  return iSize;
}

nscoord
nsColumnSetFrame::GetPrefISize(nsRenderingContext *aRenderingContext)
{
  // Our preferred width is our desired column width, if specified, otherwise
  // the child's preferred width, times the number of columns, plus the width
  // of any required column gaps
  // XXX what about forced column breaks here?
  nscoord result = 0;
  DISPLAY_PREF_WIDTH(this, result);
  const nsStyleColumn* colStyle = StyleColumn();
  nscoord colGap = GetColumnGap(this, colStyle);

  nscoord colISize;
  if (colStyle->mColumnWidth.GetUnit() == eStyleUnit_Coord) {
    colISize = colStyle->mColumnWidth.GetCoordValue();
  } else if (mFrames.FirstChild()) {
    colISize = mFrames.FirstChild()->GetPrefISize(aRenderingContext);
  } else {
    colISize = 0;
  }

  int32_t numColumns = colStyle->mColumnCount;
  if (numColumns <= 0) {
    // if column-count is auto, assume one column
    numColumns = 1;
  }

  nscoord iSize = colISize * numColumns + colGap * (numColumns - 1);
  // The multiplication above can make 'iSize' negative (integer overflow),
  // so use std::max to protect against that.
  result = std::max(iSize, colISize);
  return result;
}

bool
nsColumnSetFrame::ReflowChildren(ReflowOutput&     aDesiredSize,
                                 const ReflowInput& aReflowInput,
                                 nsReflowStatus&          aStatus,
                                 const ReflowConfig&      aConfig,
                                 bool                     aUnboundedLastColumn,
                                 nsCollapsingMargin*      aCarriedOutBEndMargin,
                                 ColumnBalanceData&       aColData)
{
  aColData.Reset();
  bool allFit = true;
  WritingMode wm = GetWritingMode();
  bool isVertical = wm.IsVertical();
  bool isRTL = !wm.IsBidiLTR();
  bool shrinkingBSizeOnly = !NS_SUBTREE_DIRTY(this) &&
    mLastBalanceBSize > aConfig.mColMaxBSize;

#ifdef DEBUG_roc
  printf("*** Doing column reflow pass: mLastBalanceBSize=%d, mColMaxBSize=%d, RTL=%d\n"
         "    mBalanceColCount=%d, mColISize=%d, mColGap=%d\n",
         mLastBalanceBSize, aConfig.mColMaxBSize, isRTL, aConfig.mBalanceColCount,
         aConfig.mColISize, aConfig.mColGap);
#endif

  DrainOverflowColumns();

  const bool colBSizeChanged = mLastBalanceBSize != aConfig.mColMaxBSize;

  if (colBSizeChanged) {
    mLastBalanceBSize = aConfig.mColMaxBSize;
    // XXX Seems like this could fire if incremental reflow pushed the column set
    // down so we reflow incrementally with a different available height.
    // We need a way to do an incremental reflow and be sure availableHeight
    // changes are taken account of! Right now I think block frames with absolute
    // children might exit early.
    //NS_ASSERTION(aKidReason != eReflowReason_Incremental,
    //             "incremental reflow should not have changed the balance height");
  }

  // get our border and padding
  LogicalMargin borderPadding = aReflowInput.ComputedLogicalBorderPadding();
  borderPadding.ApplySkipSides(GetLogicalSkipSides(&aReflowInput));

  nsRect contentRect(0, 0, 0, 0);
  nsOverflowAreas overflowRects;

  nsIFrame* child = mFrames.FirstChild();
  LogicalPoint childOrigin(wm, borderPadding.IStart(wm),
                           borderPadding.BStart(wm));
  // In vertical-rl mode, columns will not be correctly placed if the
  // reflowInput's ComputedWidth() is UNCONSTRAINED (in which case we'll get
  // a containerSize.width of zero here). In that case, the column positions
  // will be adjusted later, after our correct contentSize is known.
  nsSize containerSize = aReflowInput.ComputedSizeAsContainerIfConstrained();

  // For RTL, since the columns might not fill the frame exactly, we
  // need to account for the slop. Otherwise we'll waste time moving the
  // columns by some tiny amount

  // XXX when all of layout is converted to logical coordinates, we
  //     probably won't need to do this hack any more. For now, we
  //     confine it to the legacy horizontal-rl case
  if (!isVertical && isRTL) {
    nscoord availISize = aReflowInput.AvailableISize();
    if (aReflowInput.ComputedISize() != NS_INTRINSICSIZE) {
      availISize = aReflowInput.ComputedISize();
    }
    if (availISize != NS_INTRINSICSIZE) {
      childOrigin.I(wm) = containerSize.width - borderPadding.Left(wm) -
                          availISize;
#ifdef DEBUG_roc
      printf("*** childOrigin.iCoord = %d\n", childOrigin.I(wm));
#endif
    }
  }

  int columnCount = 0;
  int contentBEnd = 0;
  bool reflowNext = false;

  while (child) {
    // Try to skip reflowing the child. We can't skip if the child is dirty. We also can't
    // skip if the next column is dirty, because the next column's first line(s)
    // might be pullable back to this column. We can't skip if it's the last child
    // because we need to obtain the bottom margin. We can't skip
    // if this is the last column and we're supposed to assign unbounded
    // height to it, because that could change the available height from
    // the last time we reflowed it and we should try to pull all the
    // content from its next sibling. (Note that it might be the last
    // column, but not be the last child because the desired number of columns
    // has changed.)
    bool skipIncremental = !aReflowInput.ShouldReflowAllKids()
      && !NS_SUBTREE_DIRTY(child)
      && child->GetNextSibling()
      && !(aUnboundedLastColumn && columnCount == aConfig.mBalanceColCount - 1)
      && !NS_SUBTREE_DIRTY(child->GetNextSibling());
    // If we need to pull up content from the prev-in-flow then this is not just
    // a height shrink. The prev in flow will have set the dirty bit.
    // Check the overflow rect YMost instead of just the child's content height. The child
    // may have overflowing content that cares about the available height boundary.
    // (It may also have overflowing content that doesn't care about the available height
    // boundary, but if so, too bad, this optimization is defeated.)
    // We want scrollable overflow here since this is a calculation that
    // affects layout.
    bool skipResizeBSizeShrink = false;
    if (shrinkingBSizeOnly) {
      switch (wm.GetBlockDir()) {
      case WritingMode::eBlockTB:
        if (child->GetScrollableOverflowRect().YMost() <= aConfig.mColMaxBSize) {
          skipResizeBSizeShrink = true;
        }
        break;
      case WritingMode::eBlockLR:
        if (child->GetScrollableOverflowRect().XMost() <= aConfig.mColMaxBSize) {
          skipResizeBSizeShrink = true;
        }
        break;
      case WritingMode::eBlockRL:
        // XXX not sure how to handle this, so for now just don't attempt
        // the optimization
        break;
      default:
        NS_NOTREACHED("unknown block direction");
        break;
      }
    }

    nscoord childContentBEnd = 0;
    if (!reflowNext && (skipIncremental || skipResizeBSizeShrink)) {
      // This child does not need to be reflowed, but we may need to move it
      MoveChildTo(child, childOrigin, wm, containerSize);

      // If this is the last frame then make sure we get the right status
      nsIFrame* kidNext = child->GetNextSibling();
      if (kidNext) {
        aStatus = (kidNext->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER)
                  ? NS_FRAME_OVERFLOW_INCOMPLETE
                  : NS_FRAME_NOT_COMPLETE;
      } else {
        aStatus = mLastFrameStatus;
      }
      childContentBEnd = nsLayoutUtils::CalculateContentBEnd(wm, child);
#ifdef DEBUG_roc
      printf("*** Skipping child #%d %p (incremental %d, resize block-size shrink %d): status = %d\n",
             columnCount, (void*)child, skipIncremental, skipResizeBSizeShrink, aStatus);
#endif
    } else {
      LogicalSize availSize(wm, aConfig.mColISize, aConfig.mColMaxBSize);
      if (aUnboundedLastColumn && columnCount == aConfig.mBalanceColCount - 1) {
        availSize.BSize(wm) = GetAvailableContentBSize(aReflowInput);
      }

      LogicalSize computedSize = aReflowInput.ComputedSize(wm);

      if (reflowNext)
        child->AddStateBits(NS_FRAME_IS_DIRTY);

      LogicalSize kidCBSize(wm, availSize.ISize(wm), computedSize.BSize(wm));
      ReflowInput kidReflowInput(PresContext(), aReflowInput, child,
                                       availSize, &kidCBSize);
      kidReflowInput.mFlags.mIsTopOfPage = true;
      kidReflowInput.mFlags.mTableIsSplittable = false;
      kidReflowInput.mFlags.mIsColumnBalancing = aConfig.mBalanceColCount < INT32_MAX;

      // We need to reflow any float placeholders, even if our column height
      // hasn't changed.
      kidReflowInput.mFlags.mMustReflowPlaceholders = !colBSizeChanged;

#ifdef DEBUG_roc
      printf("*** Reflowing child #%d %p: availHeight=%d\n",
             columnCount, (void*)child,availSize.BSize(wm));
#endif

      // Note if the column's next in flow is not being changed by this incremental reflow.
      // This may allow the current column to avoid trying to pull lines from the next column.
      if (child->GetNextSibling() &&
          !(GetStateBits() & NS_FRAME_IS_DIRTY) &&
        !(child->GetNextSibling()->GetStateBits() & NS_FRAME_IS_DIRTY)) {
        kidReflowInput.mFlags.mNextInFlowUntouched = true;
      }

      ReflowOutput kidDesiredSize(wm, aDesiredSize.mFlags);

      // XXX it would be cool to consult the float manager for the
      // previous block to figure out the region of floats from the
      // previous column that extend into this column, and subtract
      // that region from the new float manager.  So you could stick a
      // really big float in the first column and text in following
      // columns would flow around it.

      // Reflow the frame
      LogicalPoint origin(wm,
                          childOrigin.I(wm) +
                          kidReflowInput.ComputedLogicalMargin().IStart(wm),
                          childOrigin.B(wm) +
                          kidReflowInput.ComputedLogicalMargin().BStart(wm));
      ReflowChild(child, PresContext(), kidDesiredSize, kidReflowInput,
                  wm, origin, containerSize, 0, aStatus);

      reflowNext = (aStatus & NS_FRAME_REFLOW_NEXTINFLOW) != 0;

#ifdef DEBUG_roc
      printf("*** Reflowed child #%d %p: status = %d, desiredSize=%d,%d CarriedOutBEndMargin=%d\n",
             columnCount, (void*)child, aStatus, kidDesiredSize.Width(), kidDesiredSize.Height(),
             kidDesiredSize.mCarriedOutBEndMargin.get());
#endif

      NS_FRAME_TRACE_REFLOW_OUT("Column::Reflow", aStatus);

      *aCarriedOutBEndMargin = kidDesiredSize.mCarriedOutBEndMargin;

      FinishReflowChild(child, PresContext(), kidDesiredSize,
                        &kidReflowInput, wm, childOrigin, containerSize, 0);

      childContentBEnd = nsLayoutUtils::CalculateContentBEnd(wm, child);
      if (childContentBEnd > aConfig.mColMaxBSize) {
        allFit = false;
      }
      if (childContentBEnd > availSize.BSize(wm)) {
        aColData.mMaxOverflowingBSize = std::max(childContentBEnd,
            aColData.mMaxOverflowingBSize);
      }
    }

    contentRect.UnionRect(contentRect, child->GetRect());

    ConsiderChildOverflow(overflowRects, child);
    contentBEnd = std::max(contentBEnd, childContentBEnd);
    aColData.mLastBSize = childContentBEnd;
    aColData.mSumBSize += childContentBEnd;

    // Build a continuation column if necessary
    nsIFrame* kidNextInFlow = child->GetNextInFlow();

    if (NS_FRAME_IS_FULLY_COMPLETE(aStatus) && !NS_FRAME_IS_TRUNCATED(aStatus)) {
      NS_ASSERTION(!kidNextInFlow, "next in flow should have been deleted");
      child = nullptr;
      break;
    } else {
      ++columnCount;
      // Make sure that the column has a next-in-flow. If not, we must
      // create one to hold the overflowing stuff, even if we're just
      // going to put it on our overflow list and let *our*
      // next in flow handle it.
      if (!kidNextInFlow) {
        NS_ASSERTION(aStatus & NS_FRAME_REFLOW_NEXTINFLOW,
                     "We have to create a continuation, but the block doesn't want us to reflow it?");

        // We need to create a continuing column
        kidNextInFlow = CreateNextInFlow(child);
      }

      // Make sure we reflow a next-in-flow when it switches between being
      // normal or overflow container
      if (NS_FRAME_OVERFLOW_IS_INCOMPLETE(aStatus)) {
        if (!(kidNextInFlow->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER)) {
          aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
          reflowNext = true;
          kidNextInFlow->AddStateBits(NS_FRAME_IS_OVERFLOW_CONTAINER);
        }
      }
      else if (kidNextInFlow->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER) {
        aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
        reflowNext = true;
        kidNextInFlow->RemoveStateBits(NS_FRAME_IS_OVERFLOW_CONTAINER);
      }

      if ((contentBEnd > aReflowInput.ComputedMaxBSize() ||
           contentBEnd > aReflowInput.ComputedBSize()) &&
           aConfig.mBalanceColCount < INT32_MAX) {
        // We overflowed vertically, but have not exceeded the number of
        // columns. We're going to go into overflow columns now, so balancing
        // no longer applies.
        aColData.mHasExcessBSize = true;
      }

      if (columnCount >= aConfig.mBalanceColCount) {
        // No more columns allowed here. Stop.
        aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
        kidNextInFlow->AddStateBits(NS_FRAME_IS_DIRTY);
        // Move any of our leftover columns to our overflow list. Our
        // next-in-flow will eventually pick them up.
        const nsFrameList& continuationColumns = mFrames.RemoveFramesAfter(child);
        if (continuationColumns.NotEmpty()) {
          SetOverflowFrames(continuationColumns);
        }
        child = nullptr;
        break;
      }
    }

    if (PresContext()->HasPendingInterrupt()) {
      // Stop the loop now while |child| still points to the frame that bailed
      // out.  We could keep going here and condition a bunch of the code in
      // this loop on whether there's an interrupt, or even just keep going and
      // trying to reflow the blocks (even though we know they'll interrupt
      // right after their first line), but stopping now is conceptually the
      // simplest (and probably fastest) thing.
      break;
    }

    // Advance to the next column
    child = child->GetNextSibling();

    if (child) {
      childOrigin.I(wm) += aConfig.mColISize + aConfig.mColGap;

#ifdef DEBUG_roc
      printf("*** NEXT CHILD ORIGIN.icoord = %d\n", childOrigin.I(wm));
#endif
    }
  }

  if (PresContext()->CheckForInterrupt(this) &&
      (GetStateBits() & NS_FRAME_IS_DIRTY)) {
    // Mark all our kids starting with |child| dirty

    // Note that this is a CheckForInterrupt call, not a HasPendingInterrupt,
    // because we might have interrupted while reflowing |child|, and since
    // we're about to add a dirty bit to |child| we need to make sure that
    // |this| is scheduled to have dirty bits marked on it and its ancestors.
    // Otherwise, when we go to mark dirty bits on |child|'s ancestors we'll
    // bail out immediately, since it'll already have a dirty bit.
    for (; child; child = child->GetNextSibling()) {
      child->AddStateBits(NS_FRAME_IS_DIRTY);
    }
  }

  aColData.mMaxBSize = contentBEnd;
  LogicalSize contentSize = LogicalSize(wm, contentRect.Size());
  contentSize.BSize(wm) = std::max(contentSize.BSize(wm), contentBEnd);
  mLastFrameStatus = aStatus;

  // Apply computed and min/max values
  if (aConfig.mComputedBSize != NS_INTRINSICSIZE) {
    if (aReflowInput.AvailableBSize() != NS_INTRINSICSIZE) {
      contentSize.BSize(wm) = std::min(contentSize.BSize(wm),
                                       aConfig.mComputedBSize);
    } else {
      contentSize.BSize(wm) = aConfig.mComputedBSize;
    }
  } else {
    // We add the "consumed" block-size back in so that we're applying
    // constraints to the correct bSize value, then subtract it again
    // after we've finished with the min/max calculation. This prevents us from
    // having a last continuation that is smaller than the min bSize. but which
    // has prev-in-flows, trigger a larger bSize than actually required.
    contentSize.BSize(wm) =
      aReflowInput.ApplyMinMaxBSize(contentSize.BSize(wm),
                                    aConfig.mConsumedBSize);
  }
  if (aReflowInput.ComputedISize() != NS_INTRINSICSIZE) {
    contentSize.ISize(wm) = aReflowInput.ComputedISize();
  } else {
    contentSize.ISize(wm) =
      aReflowInput.ApplyMinMaxISize(contentSize.ISize(wm));
  }

  contentSize.ISize(wm) += borderPadding.IStartEnd(wm);
  contentSize.BSize(wm) += borderPadding.BStartEnd(wm);
  aDesiredSize.SetSize(wm, contentSize);
  aDesiredSize.mOverflowAreas = overflowRects;
  aDesiredSize.UnionOverflowAreasWithDesiredBounds();

  // In vertical-rl mode, make a second pass if necessary to reposition the
  // columns with the correct container width. (In other writing modes,
  // correct containerSize was not required for column positioning so we don't
  // need this fixup.)
  if (wm.IsVerticalRL() && containerSize.width != contentSize.Width(wm)) {
    const nsSize finalContainerSize = aDesiredSize.PhysicalSize();
    for (nsIFrame* child : mFrames) {
      // Get the logical position as set previously using a provisional or
      // dummy containerSize, and reset with the correct container size.
      child->SetPosition(wm, child->GetLogicalPosition(wm, containerSize),
                         finalContainerSize);
    }
  }

#ifdef DEBUG_roc
  printf("*** DONE PASS feasible=%d\n", allFit && NS_FRAME_IS_FULLY_COMPLETE(aStatus)
         && !NS_FRAME_IS_TRUNCATED(aStatus));
#endif
  return allFit && NS_FRAME_IS_FULLY_COMPLETE(aStatus)
    && !NS_FRAME_IS_TRUNCATED(aStatus);
}

void
nsColumnSetFrame::DrainOverflowColumns()
{
  // First grab the prev-in-flows overflows and reparent them to this
  // frame.
  nsPresContext* presContext = PresContext();
  nsColumnSetFrame* prev = static_cast<nsColumnSetFrame*>(GetPrevInFlow());
  if (prev) {
    AutoFrameListPtr overflows(presContext, prev->StealOverflowFrames());
    if (overflows) {
      nsContainerFrame::ReparentFrameViewList(*overflows, prev, this);

      mFrames.InsertFrames(this, nullptr, *overflows);
    }
  }
  
  // Now pull back our own overflows and append them to our children.
  // We don't need to reparent them since we're already their parent.
  AutoFrameListPtr overflows(presContext, StealOverflowFrames());
  if (overflows) {
    // We're already the parent for these frames, so no need to set
    // their parent again.
    mFrames.AppendFrames(nullptr, *overflows);
  }
}

void
nsColumnSetFrame::FindBestBalanceBSize(const ReflowInput& aReflowInput,
                                       nsPresContext* aPresContext,
                                       ReflowConfig& aConfig,
                                       ColumnBalanceData& aColData,
                                       ReflowOutput& aDesiredSize,
                                       nsCollapsingMargin& aOutMargin,
                                       bool& aUnboundedLastColumn,
                                       bool& aRunWasFeasible,
                                       nsReflowStatus& aStatus)
{
  bool feasible = aRunWasFeasible;

  nsMargin bp = aReflowInput.ComputedPhysicalBorderPadding();
  bp.ApplySkipSides(GetSkipSides());
  bp.bottom = aReflowInput.ComputedPhysicalBorderPadding().bottom;

  nscoord availableContentBSize =
    GetAvailableContentBSize(aReflowInput);

  // Termination of the algorithm below is guaranteed because
  // aConfig.knownFeasibleBSize - aConfig.knownInfeasibleBSize decreases in every
  // iteration.

  // We set this flag when we detect that we may contain a frame
  // that can break anywhere (thus foiling the linear decrease-by-one
  // search)
  bool maybeContinuousBreakingDetected = false;

  while (!aPresContext->HasPendingInterrupt()) {
    nscoord lastKnownFeasibleBSize = aConfig.mKnownFeasibleBSize;

    // Record what we learned from the last reflow
    if (feasible) {
      // maxBSize is feasible. Also, mLastBalanceBSize is feasible.
      aConfig.mKnownFeasibleBSize = std::min(aConfig.mKnownFeasibleBSize,
                                              aColData.mMaxBSize);
      aConfig.mKnownFeasibleBSize = std::min(aConfig.mKnownFeasibleBSize,
                                              mLastBalanceBSize);

      // Furthermore, no height less than the height of the last
      // column can ever be feasible. (We might be able to reduce the
      // height of a non-last column by moving content to a later column,
      // but we can't do that with the last column.)
      if (mFrames.GetLength() == aConfig.mBalanceColCount) {
        aConfig.mKnownInfeasibleBSize = std::max(aConfig.mKnownInfeasibleBSize,
                                       aColData.mLastBSize - 1);
      }
    } else {
      aConfig.mKnownInfeasibleBSize = std::max(aConfig.mKnownInfeasibleBSize,
                                                mLastBalanceBSize);
      // If a column didn't fit in its available height, then its current
      // height must be the minimum height for unbreakable content in
      // the column, and therefore no smaller height can be feasible.
      aConfig.mKnownInfeasibleBSize = std::max(aConfig.mKnownInfeasibleBSize,
                                         aColData.mMaxOverflowingBSize - 1);

      if (aUnboundedLastColumn) {
        // The last column is unbounded, so all content got reflowed, so the
        // mColMaxBSize is feasible.
        aConfig.mKnownFeasibleBSize = std::min(aConfig.mKnownFeasibleBSize,
                                                aColData.mMaxBSize);
      }
    }

#ifdef DEBUG_roc
    printf("*** nsColumnSetFrame::Reflow balancing knownInfeasible=%d knownFeasible=%d\n",
           aConfig.mKnownInfeasibleBSize, aConfig.mKnownFeasibleBSize);
#endif


    if (aConfig.mKnownInfeasibleBSize >= aConfig.mKnownFeasibleBSize - 1) {
      // aConfig.mKnownFeasibleBSize is where we want to be
      break;
    }

    if (aConfig.mKnownInfeasibleBSize >= availableContentBSize) {
      break;
    }

    if (lastKnownFeasibleBSize - aConfig.mKnownFeasibleBSize == 1) {
      // We decreased the feasible height by one twip only. This could
      // indicate that there is a continuously breakable child frame
      // that we are crawling through.
      maybeContinuousBreakingDetected = true;
    }

    nscoord nextGuess = (aConfig.mKnownFeasibleBSize + aConfig.mKnownInfeasibleBSize)/2;
    // The constant of 600 twips is arbitrary. It's about two line-heights.
    if (aConfig.mKnownFeasibleBSize - nextGuess < 600 &&
        !maybeContinuousBreakingDetected) {
      // We're close to our target, so just try shrinking just the
      // minimum amount that will cause one of our columns to break
      // differently.
      nextGuess = aConfig.mKnownFeasibleBSize - 1;
    } else if (aUnboundedLastColumn) {
      // Make a guess by dividing that into N columns. Add some slop
      // to try to make it on the feasible side.  The constant of
      // 600 twips is arbitrary. It's about two line-heights.
      nextGuess = aColData.mSumBSize/aConfig.mBalanceColCount + 600;
      // Sanitize it
      nextGuess = clamped(nextGuess, aConfig.mKnownInfeasibleBSize + 1,
                                     aConfig.mKnownFeasibleBSize - 1);
    } else if (aConfig.mKnownFeasibleBSize == NS_INTRINSICSIZE) {
      // This can happen when we had a next-in-flow so we didn't
      // want to do an unbounded height measuring step. Let's just increase
      // from the infeasible height by some reasonable amount.
      nextGuess = aConfig.mKnownInfeasibleBSize*2 + 600;
    }
    // Don't bother guessing more than our height constraint.
    nextGuess = std::min(availableContentBSize, nextGuess);

#ifdef DEBUG_roc
    printf("*** nsColumnSetFrame::Reflow balancing choosing next guess=%d\n", nextGuess);
#endif

    aConfig.mColMaxBSize = nextGuess;

    aUnboundedLastColumn = false;
    AddStateBits(NS_FRAME_IS_DIRTY);
    feasible = ReflowColumns(aDesiredSize, aReflowInput, aStatus, aConfig, false,
                             &aOutMargin, aColData);

    if (!aConfig.mIsBalancing) {
      // Looks like we had excess height when balancing, so we gave up on
      // trying to balance.
      break;
    }
  }

  if (aConfig.mIsBalancing && !feasible &&
      !aPresContext->HasPendingInterrupt()) {
    // We may need to reflow one more time at the feasible height to
    // get a valid layout.
    bool skip = false;
    if (aConfig.mKnownInfeasibleBSize >= availableContentBSize) {
      aConfig.mColMaxBSize = availableContentBSize;
      if (mLastBalanceBSize == availableContentBSize) {
        skip = true;
      }
    } else {
      aConfig.mColMaxBSize = aConfig.mKnownFeasibleBSize;
    }
    if (!skip) {
      // If our height is unconstrained, make sure that the last column is
      // allowed to have arbitrary height here, even though we were balancing.
      // Otherwise we'd have to split, and it's not clear what we'd do with
      // that.
      AddStateBits(NS_FRAME_IS_DIRTY);
      feasible = ReflowColumns(aDesiredSize, aReflowInput, aStatus, aConfig,
                               availableContentBSize == NS_UNCONSTRAINEDSIZE,
                               &aOutMargin, aColData);
    }
  }

  aRunWasFeasible = feasible;
}

void
nsColumnSetFrame::Reflow(nsPresContext*           aPresContext,
                         ReflowOutput&     aDesiredSize,
                         const ReflowInput& aReflowInput,
                         nsReflowStatus&          aStatus)
{
  MarkInReflow();
  // Don't support interruption in columns
  nsPresContext::InterruptPreventer noInterrupts(aPresContext);

  DO_GLOBAL_REFLOW_COUNT("nsColumnSetFrame");
  DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);

  // Initialize OUT parameter
  aStatus = NS_FRAME_COMPLETE;

  // Our children depend on our block-size if we have a fixed block-size.
  if (aReflowInput.ComputedBSize() != NS_AUTOHEIGHT) {
    AddStateBits(NS_FRAME_CONTAINS_RELATIVE_BSIZE);
  } else {
    RemoveStateBits(NS_FRAME_CONTAINS_RELATIVE_BSIZE);
  }

#ifdef DEBUG
  nsFrameList::Enumerator oc(GetChildList(kOverflowContainersList));
  for (; !oc.AtEnd(); oc.Next()) {
    MOZ_ASSERT(!IS_TRUE_OVERFLOW_CONTAINER(oc.get()));
  }
  nsFrameList::Enumerator eoc(GetChildList(kExcessOverflowContainersList));
  for (; !eoc.AtEnd(); eoc.Next()) {
    MOZ_ASSERT(!IS_TRUE_OVERFLOW_CONTAINER(eoc.get()));
  }
#endif

  nsOverflowAreas ocBounds;
  nsReflowStatus ocStatus = NS_FRAME_COMPLETE;
  if (GetPrevInFlow()) {
    ReflowOverflowContainerChildren(aPresContext, aReflowInput, ocBounds, 0,
                                    ocStatus);
  }

  //------------ Handle Incremental Reflow -----------------

  // If inline size is unconstrained, set aForceAuto to true to allow
  // the columns to expand in the inline direction. (This typically
  // happens in orthogonal flows where the inline direction is the
  // container's block direction).
  ReflowConfig config =
    ChooseColumnStrategy(aReflowInput,
                         aReflowInput.ComputedISize() == NS_UNCONSTRAINEDSIZE);

  // If balancing, then we allow the last column to grow to unbounded
  // height during the first reflow. This gives us a way to estimate
  // what the average column height should be, because we can measure
  // the heights of all the columns and sum them up. But don't do this
  // if we have a next in flow because we don't want to suck all its
  // content back here and then have to push it out again!
  nsIFrame* nextInFlow = GetNextInFlow();
  bool unboundedLastColumn = config.mIsBalancing && !nextInFlow;
  nsCollapsingMargin carriedOutBottomMargin;
  ColumnBalanceData colData;
  colData.mHasExcessBSize = false;

  bool feasible = ReflowColumns(aDesiredSize, aReflowInput, aStatus, config,
                                unboundedLastColumn, &carriedOutBottomMargin,
                                colData);

  // If we're not balancing, then we're already done, since we should have
  // reflown all of our children, and there is no need for a binary search to
  // determine proper column height.
  if (config.mIsBalancing && !aPresContext->HasPendingInterrupt()) {
    FindBestBalanceBSize(aReflowInput, aPresContext, config, colData,
                          aDesiredSize, carriedOutBottomMargin,
                          unboundedLastColumn, feasible, aStatus);
  }

  if (aPresContext->HasPendingInterrupt() &&
      aReflowInput.AvailableBSize() == NS_UNCONSTRAINEDSIZE) {
    // In this situation, we might be lying about our reflow status, because
    // our last kid (the one that got interrupted) was incomplete.  Fix that.
    aStatus = NS_FRAME_COMPLETE;
  }

  NS_ASSERTION(NS_FRAME_IS_FULLY_COMPLETE(aStatus) ||
               aReflowInput.AvailableBSize() != NS_UNCONSTRAINEDSIZE,
               "Column set should be complete if the available block-size is unconstrained");

  // Merge overflow container bounds and status.
  aDesiredSize.mOverflowAreas.UnionWith(ocBounds);
  NS_MergeReflowStatusInto(&aStatus, ocStatus);

  FinishReflowWithAbsoluteFrames(aPresContext, aDesiredSize, aReflowInput, aStatus, false);

  aDesiredSize.mCarriedOutBEndMargin = carriedOutBottomMargin;

  NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}

void
nsColumnSetFrame::BuildDisplayList(nsDisplayListBuilder*   aBuilder,
                                   const nsRect&           aDirtyRect,
                                   const nsDisplayListSet& aLists)
{
  DisplayBorderBackgroundOutline(aBuilder, aLists);

  if (IsVisibleForPainting(aBuilder)) {
    aLists.BorderBackground()->AppendNewToTop(new (aBuilder)
      nsDisplayGenericOverflow(aBuilder, this, ::PaintColumnRule, "ColumnRule",
                               nsDisplayItem::TYPE_COLUMN_RULE));
  }

  // Our children won't have backgrounds so it doesn't matter where we put them.
  for (nsFrameList::Enumerator e(mFrames); !e.AtEnd(); e.Next()) {
    BuildDisplayListForChild(aBuilder, e.get(), aDirtyRect, aLists);
  }
}

#ifdef DEBUG
void
nsColumnSetFrame::SetInitialChildList(ChildListID     aListID,
                                      nsFrameList&    aChildList)
{
  MOZ_ASSERT(aListID != kPrincipalList || aChildList.OnlyChild(),
             "initial principal child list must have exactly one child");
  nsContainerFrame::SetInitialChildList(kPrincipalList, aChildList);
}

void
nsColumnSetFrame::AppendFrames(ChildListID     aListID,
                               nsFrameList&    aFrameList)
{
  MOZ_CRASH("unsupported operation");
}

void
nsColumnSetFrame::InsertFrames(ChildListID     aListID,
                               nsIFrame*       aPrevFrame,
                               nsFrameList&    aFrameList)
{
  MOZ_CRASH("unsupported operation");
}

void
nsColumnSetFrame::RemoveFrame(ChildListID     aListID,
                              nsIFrame*       aOldFrame)
{
  MOZ_CRASH("unsupported operation");
}
#endif