Source code

Revision control

Copy as Markdown

Other Tools

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim:set ts=2 sw=2 sts=2 et cindent: */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */
#include "AudioBufferSourceNode.h"
#include "nsDebug.h"
#include "mozilla/dom/AudioBufferSourceNodeBinding.h"
#include "mozilla/dom/AudioParam.h"
#include "mozilla/FloatingPoint.h"
#include "nsContentUtils.h"
#include "nsMathUtils.h"
#include "AlignmentUtils.h"
#include "AudioNodeEngine.h"
#include "AudioNodeTrack.h"
#include "AudioDestinationNode.h"
#include "AudioParamTimeline.h"
#include <limits>
#include <algorithm>
#include "Tracing.h"
namespace mozilla::dom {
NS_IMPL_CYCLE_COLLECTION_INHERITED(AudioBufferSourceNode,
AudioScheduledSourceNode, mBuffer,
mPlaybackRate, mDetune)
NS_INTERFACE_MAP_BEGIN_CYCLE_COLLECTION(AudioBufferSourceNode)
NS_INTERFACE_MAP_END_INHERITING(AudioScheduledSourceNode)
NS_IMPL_ADDREF_INHERITED(AudioBufferSourceNode, AudioScheduledSourceNode)
NS_IMPL_RELEASE_INHERITED(AudioBufferSourceNode, AudioScheduledSourceNode)
/**
* Media-thread playback engine for AudioBufferSourceNode.
* Nothing is played until a non-null buffer has been set (via
* AudioNodeTrack::SetBuffer) and a non-zero mBufferSampleRate has been set
* (via AudioNodeTrack::SetInt32Parameter)
*/
class AudioBufferSourceNodeEngine final : public AudioNodeEngine {
public:
AudioBufferSourceNodeEngine(AudioNode* aNode,
AudioDestinationNode* aDestination)
: AudioNodeEngine(aNode),
mStart(0.0),
mBeginProcessing(0),
mStop(TRACK_TIME_MAX),
mResampler(nullptr),
mRemainingResamplerTail(0),
mRemainingFrames(TRACK_TICKS_MAX),
mLoopStart(0),
mLoopEnd(0),
mBufferPosition(0),
mBufferSampleRate(0),
// mResamplerOutRate is initialized in UpdateResampler().
mChannels(0),
mDestination(aDestination->Track()),
mPlaybackRateTimeline(1.0f),
mDetuneTimeline(0.0f),
mLoop(false) {}
~AudioBufferSourceNodeEngine() {
if (mResampler) {
speex_resampler_destroy(mResampler);
}
}
void SetSourceTrack(AudioNodeTrack* aSource) { mSource = aSource; }
void RecvTimelineEvent(uint32_t aIndex, AudioParamEvent& aEvent) override {
MOZ_ASSERT(mDestination);
aEvent.ConvertToTicks(mDestination);
mRecomputeOutRate = true;
switch (aIndex) {
case AudioBufferSourceNode::PLAYBACKRATE:
mPlaybackRateTimeline.InsertEvent<int64_t>(aEvent);
break;
case AudioBufferSourceNode::DETUNE:
mDetuneTimeline.InsertEvent<int64_t>(aEvent);
break;
default:
NS_ERROR("Bad AudioBufferSourceNodeEngine TimelineParameter");
}
}
void SetTrackTimeParameter(uint32_t aIndex, TrackTime aParam) override {
switch (aIndex) {
case AudioBufferSourceNode::STOP:
mStop = aParam;
break;
default:
NS_ERROR("Bad AudioBufferSourceNodeEngine TrackTimeParameter");
}
}
void SetDoubleParameter(uint32_t aIndex, double aParam) override {
switch (aIndex) {
case AudioBufferSourceNode::START:
MOZ_ASSERT(!mStart, "Another START?");
mStart = aParam * mDestination->mSampleRate;
// Round to nearest
mBeginProcessing = llround(mStart);
break;
case AudioBufferSourceNode::DURATION:
MOZ_ASSERT(aParam >= 0);
mRemainingFrames = llround(aParam * mBufferSampleRate);
break;
default:
NS_ERROR("Bad AudioBufferSourceNodeEngine double parameter.");
};
}
void SetInt32Parameter(uint32_t aIndex, int32_t aParam) override {
switch (aIndex) {
case AudioBufferSourceNode::SAMPLE_RATE:
MOZ_ASSERT(aParam > 0);
MOZ_ASSERT(mRecomputeOutRate);
mBufferSampleRate = aParam;
mSource->SetActive();
break;
case AudioBufferSourceNode::BUFFERSTART:
MOZ_ASSERT(aParam >= 0);
if (mBufferPosition == 0) {
mBufferPosition = aParam;
}
break;
case AudioBufferSourceNode::LOOP:
mLoop = !!aParam;
break;
case AudioBufferSourceNode::LOOPSTART:
MOZ_ASSERT(aParam >= 0);
mLoopStart = aParam;
break;
case AudioBufferSourceNode::LOOPEND:
MOZ_ASSERT(aParam >= 0);
mLoopEnd = aParam;
break;
default:
NS_ERROR("Bad AudioBufferSourceNodeEngine Int32Parameter");
}
}
void SetBuffer(AudioChunk&& aBuffer) override { mBuffer = aBuffer; }
bool BegunResampling() { return mBeginProcessing == -TRACK_TIME_MAX; }
void UpdateResampler(int32_t aOutRate, uint32_t aChannels) {
if (mResampler &&
(aChannels != mChannels ||
// If the resampler has begun, then it will have moved
// mBufferPosition to after the samples it has read, but it hasn't
// output its buffered samples. Keep using the resampler, even if
// the rates now match, so that this latent segment is output.
(aOutRate == mBufferSampleRate && !BegunResampling()))) {
speex_resampler_destroy(mResampler);
mResampler = nullptr;
mRemainingResamplerTail = 0;
mBeginProcessing = llround(mStart);
}
if (aChannels == 0 || (aOutRate == mBufferSampleRate && !mResampler)) {
mResamplerOutRate = aOutRate;
return;
}
if (!mResampler) {
mChannels = aChannels;
mResampler = speex_resampler_init(mChannels, mBufferSampleRate, aOutRate,
SPEEX_RESAMPLER_QUALITY_MIN, nullptr);
} else {
if (mResamplerOutRate == aOutRate) {
return;
}
if (speex_resampler_set_rate(mResampler, mBufferSampleRate, aOutRate) !=
RESAMPLER_ERR_SUCCESS) {
NS_ASSERTION(false, "speex_resampler_set_rate failed");
return;
}
}
mResamplerOutRate = aOutRate;
if (!BegunResampling()) {
// Low pass filter effects from the resampler mean that samples before
// the start time are influenced by resampling the buffer. The input
// latency indicates half the filter width.
int64_t inputLatency = speex_resampler_get_input_latency(mResampler);
uint32_t ratioNum, ratioDen;
speex_resampler_get_ratio(mResampler, &ratioNum, &ratioDen);
// The output subsample resolution supported in aligning the resampler
// is ratioNum. First round the start time to the nearest subsample.
int64_t subsample = llround(mStart * ratioNum);
// Now include the leading effects of the filter, and round *up* to the
// next whole tick, because there is no effect on samples outside the
// filter width.
mBeginProcessing =
(subsample - inputLatency * ratioDen + ratioNum - 1) / ratioNum;
}
}
// Borrow a full buffer of size WEBAUDIO_BLOCK_SIZE from the source buffer
// at offset aSourceOffset. This avoids copying memory.
void BorrowFromInputBuffer(AudioBlock* aOutput, uint32_t aChannels) {
aOutput->SetBuffer(mBuffer.mBuffer);
aOutput->mChannelData.SetLength(aChannels);
for (uint32_t i = 0; i < aChannels; ++i) {
aOutput->mChannelData[i] =
mBuffer.ChannelData<float>()[i] + mBufferPosition;
}
aOutput->mVolume = mBuffer.mVolume;
aOutput->mBufferFormat = AUDIO_FORMAT_FLOAT32;
}
// Copy aNumberOfFrames frames from the source buffer at offset aSourceOffset
// and put it at offset aBufferOffset in the destination buffer.
template <typename T>
void CopyFromInputBuffer(AudioBlock* aOutput, uint32_t aChannels,
uintptr_t aOffsetWithinBlock,
uint32_t aNumberOfFrames) {
MOZ_ASSERT(mBuffer.mVolume == 1.0f);
for (uint32_t i = 0; i < aChannels; ++i) {
float* baseChannelData = aOutput->ChannelFloatsForWrite(i);
ConvertAudioSamples(mBuffer.ChannelData<T>()[i] + mBufferPosition,
baseChannelData + aOffsetWithinBlock,
aNumberOfFrames);
}
}
// Resamples input data to an output buffer, according to |mBufferSampleRate|
// and the playbackRate/detune. The number of frames consumed/produced depends
// on the amount of space remaining in both the input and output buffer, and
// the playback rate (that is, the ratio between the output samplerate and the
// input samplerate).
void CopyFromInputBufferWithResampling(AudioBlock* aOutput,
uint32_t aChannels,
uint32_t* aOffsetWithinBlock,
uint32_t aAvailableInOutput,
TrackTime* aCurrentPosition,
uint32_t aBufferMax) {
if (*aOffsetWithinBlock == 0) {
aOutput->AllocateChannels(aChannels);
}
SpeexResamplerState* resampler = mResampler;
MOZ_ASSERT(aChannels > 0);
if (mBufferPosition < aBufferMax) {
uint32_t availableInInputBuffer = aBufferMax - mBufferPosition;
uint32_t ratioNum, ratioDen;
speex_resampler_get_ratio(resampler, &ratioNum, &ratioDen);
// Limit the number of input samples copied and possibly
// format-converted for resampling by estimating how many will be used.
// This may be a little small if still filling the resampler with
// initial data, but we'll get called again and it will work out.
uint32_t inputLimit = aAvailableInOutput * ratioNum / ratioDen + 10;
if (!BegunResampling()) {
// First time the resampler is used.
uint32_t inputLatency = speex_resampler_get_input_latency(resampler);
inputLimit += inputLatency;
// If starting after mStart, then play from the beginning of the
// buffer, but correct for input latency. If starting before mStart,
// then align the resampler so that the time corresponding to the
// first input sample is mStart.
int64_t skipFracNum = static_cast<int64_t>(inputLatency) * ratioDen;
double leadTicks = mStart - *aCurrentPosition;
if (leadTicks > 0.0) {
// Round to nearest output subsample supported by the resampler at
// these rates.
int64_t leadSubsamples = llround(leadTicks * ratioNum);
MOZ_ASSERT(leadSubsamples <= skipFracNum,
"mBeginProcessing is wrong?");
skipFracNum -= leadSubsamples;
}
speex_resampler_set_skip_frac_num(
resampler, std::min<int64_t>(skipFracNum, UINT32_MAX));
mBeginProcessing = -TRACK_TIME_MAX;
}
inputLimit = std::min(inputLimit, availableInInputBuffer);
MOZ_ASSERT(mBuffer.mVolume == 1.0f);
for (uint32_t i = 0; true;) {
uint32_t inSamples = inputLimit;
uint32_t outSamples = aAvailableInOutput;
float* outputData =
aOutput->ChannelFloatsForWrite(i) + *aOffsetWithinBlock;
if (mBuffer.mBufferFormat == AUDIO_FORMAT_FLOAT32) {
const float* inputData =
mBuffer.ChannelData<float>()[i] + mBufferPosition;
WebAudioUtils::SpeexResamplerProcess(
resampler, i, inputData, &inSamples, outputData, &outSamples);
} else {
MOZ_ASSERT(mBuffer.mBufferFormat == AUDIO_FORMAT_S16);
const int16_t* inputData =
mBuffer.ChannelData<int16_t>()[i] + mBufferPosition;
WebAudioUtils::SpeexResamplerProcess(
resampler, i, inputData, &inSamples, outputData, &outSamples);
}
if (++i == aChannels) {
mBufferPosition += inSamples;
mRemainingFrames -= inSamples;
MOZ_ASSERT(mBufferPosition <= mBuffer.GetDuration());
MOZ_ASSERT(mRemainingFrames >= 0);
*aOffsetWithinBlock += outSamples;
*aCurrentPosition += outSamples;
if ((!mLoop && inSamples == availableInInputBuffer) ||
mRemainingFrames == 0) {
// We'll feed in enough zeros to empty out the resampler's memory.
// This handles the output latency as well as capturing the low
// pass effects of the resample filter.
mRemainingResamplerTail =
2 * speex_resampler_get_input_latency(resampler) - 1;
}
return;
}
}
} else {
for (uint32_t i = 0; true;) {
uint32_t inSamples = mRemainingResamplerTail;
uint32_t outSamples = aAvailableInOutput;
float* outputData =
aOutput->ChannelFloatsForWrite(i) + *aOffsetWithinBlock;
// AudioDataValue* for aIn selects the function that does not try to
// copy and format-convert input data.
WebAudioUtils::SpeexResamplerProcess(
resampler, i, static_cast<AudioDataValue*>(nullptr), &inSamples,
outputData, &outSamples);
if (++i == aChannels) {
MOZ_ASSERT(inSamples <= mRemainingResamplerTail);
mRemainingResamplerTail -= inSamples;
*aOffsetWithinBlock += outSamples;
*aCurrentPosition += outSamples;
break;
}
}
}
}
/**
* Fill aOutput with as many zero frames as we can, and advance
* aOffsetWithinBlock and aCurrentPosition based on how many frames we write.
* This will never advance aOffsetWithinBlock past WEBAUDIO_BLOCK_SIZE or
* aCurrentPosition past aMaxPos. This function knows when it needs to
* allocate the output buffer, and also optimizes the case where it can avoid
* memory allocations.
*/
void FillWithZeroes(AudioBlock* aOutput, uint32_t aChannels,
uint32_t* aOffsetWithinBlock, TrackTime* aCurrentPosition,
TrackTime aMaxPos) {
MOZ_ASSERT(*aCurrentPosition < aMaxPos);
uint32_t numFrames = std::min<TrackTime>(
WEBAUDIO_BLOCK_SIZE - *aOffsetWithinBlock, aMaxPos - *aCurrentPosition);
if (numFrames == WEBAUDIO_BLOCK_SIZE || !aChannels) {
aOutput->SetNull(WEBAUDIO_BLOCK_SIZE);
} else {
if (*aOffsetWithinBlock == 0) {
aOutput->AllocateChannels(aChannels);
}
WriteZeroesToAudioBlock(aOutput, *aOffsetWithinBlock, numFrames);
}
*aOffsetWithinBlock += numFrames;
*aCurrentPosition += numFrames;
}
/**
* Copy as many frames as possible from the source buffer to aOutput, and
* advance aOffsetWithinBlock and aCurrentPosition based on how many frames
* we write. This will never advance aOffsetWithinBlock past
* WEBAUDIO_BLOCK_SIZE, or aCurrentPosition past mStop. It takes data from
* the buffer at aBufferOffset, and never takes more data than aBufferMax.
* This function knows when it needs to allocate the output buffer, and also
* optimizes the case where it can avoid memory allocations.
*/
void CopyFromBuffer(AudioBlock* aOutput, uint32_t aChannels,
uint32_t* aOffsetWithinBlock, TrackTime* aCurrentPosition,
uint32_t aBufferMax) {
MOZ_ASSERT(*aCurrentPosition < mStop);
uint32_t availableInOutput = std::min<TrackTime>(
WEBAUDIO_BLOCK_SIZE - *aOffsetWithinBlock, mStop - *aCurrentPosition);
if (mResampler) {
CopyFromInputBufferWithResampling(aOutput, aChannels, aOffsetWithinBlock,
availableInOutput, aCurrentPosition,
aBufferMax);
return;
}
if (aChannels == 0) {
aOutput->SetNull(WEBAUDIO_BLOCK_SIZE);
// There is no attempt here to limit advance so that mBufferPosition is
// limited to aBufferMax. The only observable affect of skipping the
// check would be in the precise timing of the ended event if the loop
// attribute is reset after playback has looped.
*aOffsetWithinBlock += availableInOutput;
*aCurrentPosition += availableInOutput;
// Rounding at the start and end of the period means that fractional
// increments essentially accumulate if outRate remains constant. If
// outRate is varying, then accumulation happens on average but not
// precisely.
TrackTicks start =
*aCurrentPosition * mBufferSampleRate / mResamplerOutRate;
TrackTicks end = (*aCurrentPosition + availableInOutput) *
mBufferSampleRate / mResamplerOutRate;
mBufferPosition += end - start;
return;
}
uint32_t numFrames =
std::min(aBufferMax - mBufferPosition, availableInOutput);
bool shouldBorrow = false;
if (numFrames == WEBAUDIO_BLOCK_SIZE &&
mBuffer.mBufferFormat == AUDIO_FORMAT_FLOAT32) {
shouldBorrow = true;
for (uint32_t i = 0; i < aChannels; ++i) {
if (!IS_ALIGNED16(mBuffer.ChannelData<float>()[i] + mBufferPosition)) {
shouldBorrow = false;
break;
}
}
}
MOZ_ASSERT(mBufferPosition < aBufferMax);
if (shouldBorrow) {
BorrowFromInputBuffer(aOutput, aChannels);
} else {
if (*aOffsetWithinBlock == 0) {
aOutput->AllocateChannels(aChannels);
}
if (mBuffer.mBufferFormat == AUDIO_FORMAT_FLOAT32) {
CopyFromInputBuffer<float>(aOutput, aChannels, *aOffsetWithinBlock,
numFrames);
} else {
MOZ_ASSERT(mBuffer.mBufferFormat == AUDIO_FORMAT_S16);
CopyFromInputBuffer<int16_t>(aOutput, aChannels, *aOffsetWithinBlock,
numFrames);
}
}
*aOffsetWithinBlock += numFrames;
*aCurrentPosition += numFrames;
mBufferPosition += numFrames;
mRemainingFrames -= numFrames;
}
int32_t ComputeFinalOutSampleRate(float aPlaybackRate, float aDetune) {
float computedPlaybackRate = aPlaybackRate * fdlibm_exp2f(aDetune / 1200.f);
// Make sure the playback rate is something our resampler can work with.
int32_t rate = WebAudioUtils::TruncateFloatToInt<int32_t>(
mSource->mSampleRate / computedPlaybackRate);
return rate ? rate : mBufferSampleRate;
}
void UpdateSampleRateIfNeeded(uint32_t aChannels, TrackTime aTrackPosition) {
bool simplePlaybackRate = mPlaybackRateTimeline.HasSimpleValue();
bool simpleDetune = mDetuneTimeline.HasSimpleValue();
if (simplePlaybackRate && simpleDetune && !mRecomputeOutRate) {
return; // skipping the slow exp2f() for the detune
}
mRecomputeOutRate = false;
float playbackRate;
float detune;
if (simplePlaybackRate) {
playbackRate = mPlaybackRateTimeline.GetValue();
} else {
playbackRate =
mPlaybackRateTimeline.GetComplexValueAtTime(aTrackPosition);
}
if (simpleDetune) {
detune = mDetuneTimeline.GetValue();
} else {
detune = mDetuneTimeline.GetComplexValueAtTime(aTrackPosition);
}
if (playbackRate <= 0 || std::isnan(playbackRate)) {
playbackRate = 1.0f;
}
int32_t outRate = ComputeFinalOutSampleRate(playbackRate, detune);
UpdateResampler(outRate, aChannels);
}
void ProcessBlock(AudioNodeTrack* aTrack, GraphTime aFrom,
const AudioBlock& aInput, AudioBlock* aOutput,
bool* aFinished) override {
TRACE("AudioBufferSourceNodeEngine::ProcessBlock");
if (mBufferSampleRate == 0) {
// start() has not yet been called or no buffer has yet been set
aOutput->SetNull(WEBAUDIO_BLOCK_SIZE);
return;
}
TrackTime streamPosition = mDestination->GraphTimeToTrackTime(aFrom);
uint32_t channels = mBuffer.ChannelCount();
UpdateSampleRateIfNeeded(channels, streamPosition);
uint32_t written = 0;
while (true) {
if ((mStop != TRACK_TIME_MAX && streamPosition >= mStop) ||
(!mRemainingResamplerTail &&
((mBufferPosition >= mBuffer.GetDuration() && !mLoop) ||
mRemainingFrames <= 0))) {
if (written != WEBAUDIO_BLOCK_SIZE) {
FillWithZeroes(aOutput, channels, &written, &streamPosition,
TRACK_TIME_MAX);
}
*aFinished = true;
break;
}
if (written == WEBAUDIO_BLOCK_SIZE) {
break;
}
if (streamPosition < mBeginProcessing) {
FillWithZeroes(aOutput, channels, &written, &streamPosition,
mBeginProcessing);
continue;
}
TrackTicks bufferLeft;
if (mLoop) {
// mLoopEnd can become less than mBufferPosition when a LOOPEND engine
// parameter is received after "loopend" is changed on the node or a
// new buffer with lower samplerate is set.
if (mBufferPosition >= mLoopEnd) {
mBufferPosition = mLoopStart;
}
bufferLeft =
std::min<TrackTicks>(mRemainingFrames, mLoopEnd - mBufferPosition);
} else {
bufferLeft =
std::min(mRemainingFrames, mBuffer.GetDuration() - mBufferPosition);
}
CopyFromBuffer(aOutput, channels, &written, &streamPosition,
bufferLeft + mBufferPosition);
}
}
bool IsActive() const override {
// Whether buffer has been set and start() has been called.
return mBufferSampleRate != 0;
}
size_t SizeOfExcludingThis(MallocSizeOf aMallocSizeOf) const override {
// Not owned:
// - mBuffer - shared w/ AudioNode
// - mPlaybackRateTimeline - shared w/ AudioNode
// - mDetuneTimeline - shared w/ AudioNode
size_t amount = AudioNodeEngine::SizeOfExcludingThis(aMallocSizeOf);
// NB: We need to modify speex if we want the full memory picture, internal
// fields that need measuring noted below.
// - mResampler->mem
// - mResampler->sinc_table
// - mResampler->last_sample
// - mResampler->magic_samples
// - mResampler->samp_frac_num
amount += aMallocSizeOf(mResampler);
return amount;
}
size_t SizeOfIncludingThis(MallocSizeOf aMallocSizeOf) const override {
return aMallocSizeOf(this) + SizeOfExcludingThis(aMallocSizeOf);
}
double mStart; // including the fractional position between ticks
// Low pass filter effects from the resampler mean that samples before the
// start time are influenced by resampling the buffer. mBeginProcessing
// includes the extent of this filter. The special value of -TRACK_TIME_MAX
// indicates that the resampler has begun processing.
TrackTime mBeginProcessing;
TrackTime mStop;
AudioChunk mBuffer;
SpeexResamplerState* mResampler;
// mRemainingResamplerTail, like mBufferPosition
// is measured in input buffer samples.
uint32_t mRemainingResamplerTail;
TrackTicks mRemainingFrames;
uint32_t mLoopStart;
uint32_t mLoopEnd;
uint32_t mBufferPosition;
int32_t mBufferSampleRate;
int32_t mResamplerOutRate;
uint32_t mChannels;
RefPtr<AudioNodeTrack> mDestination;
// mSource deletes the engine in its destructor.
AudioNodeTrack* MOZ_NON_OWNING_REF mSource;
AudioParamTimeline mPlaybackRateTimeline;
AudioParamTimeline mDetuneTimeline;
bool mLoop;
bool mRecomputeOutRate = true;
};
AudioBufferSourceNode::AudioBufferSourceNode(AudioContext* aContext)
: AudioScheduledSourceNode(aContext, 2, ChannelCountMode::Max,
ChannelInterpretation::Speakers),
mLoopStart(0.0),
mLoopEnd(0.0),
// mOffset and mDuration are initialized in Start().
mLoop(false),
mStartCalled(false),
mBufferSet(false) {
mPlaybackRate = CreateAudioParam(PLAYBACKRATE, u"playbackRate"_ns, 1.0f);
mDetune = CreateAudioParam(DETUNE, u"detune"_ns, 0.0f);
AudioBufferSourceNodeEngine* engine =
new AudioBufferSourceNodeEngine(this, aContext->Destination());
mTrack = AudioNodeTrack::Create(aContext, engine,
AudioNodeTrack::NEED_MAIN_THREAD_ENDED,
aContext->Graph());
engine->SetSourceTrack(mTrack);
mTrack->AddMainThreadListener(this);
}
/* static */
already_AddRefed<AudioBufferSourceNode> AudioBufferSourceNode::Create(
JSContext* aCx, AudioContext& aAudioContext,
const AudioBufferSourceOptions& aOptions) {
RefPtr<AudioBufferSourceNode> audioNode =
new AudioBufferSourceNode(&aAudioContext);
if (aOptions.mBuffer.WasPassed()) {
ErrorResult ignored;
MOZ_ASSERT(aCx);
audioNode->SetBuffer(aCx, aOptions.mBuffer.Value(), ignored);
}
audioNode->Detune()->SetInitialValue(aOptions.mDetune);
audioNode->SetLoop(aOptions.mLoop);
audioNode->SetLoopEnd(aOptions.mLoopEnd);
audioNode->SetLoopStart(aOptions.mLoopStart);
audioNode->PlaybackRate()->SetInitialValue(aOptions.mPlaybackRate);
return audioNode.forget();
}
void AudioBufferSourceNode::DestroyMediaTrack() {
bool hadTrack = mTrack;
if (hadTrack) {
mTrack->RemoveMainThreadListener(this);
}
AudioNode::DestroyMediaTrack();
}
size_t AudioBufferSourceNode::SizeOfExcludingThis(
MallocSizeOf aMallocSizeOf) const {
size_t amount = AudioNode::SizeOfExcludingThis(aMallocSizeOf);
/* mBuffer can be shared and is accounted for separately. */
amount += mPlaybackRate->SizeOfIncludingThis(aMallocSizeOf);
amount += mDetune->SizeOfIncludingThis(aMallocSizeOf);
return amount;
}
size_t AudioBufferSourceNode::SizeOfIncludingThis(
MallocSizeOf aMallocSizeOf) const {
return aMallocSizeOf(this) + SizeOfExcludingThis(aMallocSizeOf);
}
JSObject* AudioBufferSourceNode::WrapObject(JSContext* aCx,
JS::Handle<JSObject*> aGivenProto) {
return AudioBufferSourceNode_Binding::Wrap(aCx, this, aGivenProto);
}
void AudioBufferSourceNode::Start(double aWhen, double aOffset,
const Optional<double>& aDuration,
ErrorResult& aRv) {
if (!WebAudioUtils::IsTimeValid(aWhen)) {
aRv.ThrowRangeError<MSG_VALUE_OUT_OF_RANGE>("start time");
return;
}
if (aOffset < 0) {
aRv.ThrowRangeError<MSG_VALUE_OUT_OF_RANGE>("offset");
return;
}
if (aDuration.WasPassed() && !WebAudioUtils::IsTimeValid(aDuration.Value())) {
aRv.ThrowRangeError<MSG_VALUE_OUT_OF_RANGE>("duration");
return;
}
if (mStartCalled) {
aRv.ThrowInvalidStateError(
"Start has already been called on this AudioBufferSourceNode.");
return;
}
mStartCalled = true;
AudioNodeTrack* ns = mTrack;
if (!ns) {
// Nothing to play, or we're already dead for some reason
return;
}
// Remember our arguments so that we can use them when we get a new buffer.
mOffset = aOffset;
mDuration = aDuration.WasPassed() ? aDuration.Value()
: std::numeric_limits<double>::min();
WEB_AUDIO_API_LOG("%f: %s %u Start(%f, %g, %g)", Context()->CurrentTime(),
NodeType(), Id(), aWhen, aOffset, mDuration);
// We can't send these parameters without a buffer because we don't know the
// buffer's sample rate or length.
if (mBuffer) {
SendOffsetAndDurationParametersToTrack(ns);
}
// Don't set parameter unnecessarily
if (aWhen > 0.0) {
ns->SetDoubleParameter(START, aWhen);
}
Context()->StartBlockedAudioContextIfAllowed();
}
void AudioBufferSourceNode::Start(double aWhen, ErrorResult& aRv) {
Start(aWhen, 0 /* offset */, Optional<double>(), aRv);
}
void AudioBufferSourceNode::SendBufferParameterToTrack(JSContext* aCx) {
AudioNodeTrack* ns = mTrack;
if (!ns) {
return;
}
if (mBuffer) {
AudioChunk data = mBuffer->GetThreadSharedChannelsForRate(aCx);
ns->SetBuffer(std::move(data));
if (mStartCalled) {
SendOffsetAndDurationParametersToTrack(ns);
}
} else {
ns->SetBuffer(AudioChunk());
MarkInactive();
}
}
void AudioBufferSourceNode::SendOffsetAndDurationParametersToTrack(
AudioNodeTrack* aTrack) {
NS_ASSERTION(
mBuffer && mStartCalled,
"Only call this when we have a buffer and start() has been called");
float rate = mBuffer->SampleRate();
aTrack->SetInt32Parameter(SAMPLE_RATE, rate);
int32_t offsetSamples = std::max(0, NS_lround(mOffset * rate));
// Don't set parameter unnecessarily
if (offsetSamples > 0) {
aTrack->SetInt32Parameter(BUFFERSTART, offsetSamples);
}
if (mDuration != std::numeric_limits<double>::min()) {
MOZ_ASSERT(mDuration >= 0.0); // provided by Start()
MOZ_ASSERT(rate >= 0.0f); // provided by AudioBuffer::Create()
aTrack->SetDoubleParameter(DURATION, mDuration);
}
MarkActive();
}
void AudioBufferSourceNode::Stop(double aWhen, ErrorResult& aRv) {
if (!WebAudioUtils::IsTimeValid(aWhen)) {
aRv.ThrowRangeError<MSG_VALUE_OUT_OF_RANGE>("stop time");
return;
}
if (!mStartCalled) {
aRv.ThrowInvalidStateError(
"Start has not been called on this AudioBufferSourceNode.");
return;
}
WEB_AUDIO_API_LOG("%f: %s %u Stop(%f)", Context()->CurrentTime(), NodeType(),
Id(), aWhen);
AudioNodeTrack* ns = mTrack;
if (!ns || !Context()) {
// We've already stopped and had our track shut down
return;
}
ns->SetTrackTimeParameter(STOP, Context(), std::max(0.0, aWhen));
}
void AudioBufferSourceNode::NotifyMainThreadTrackEnded() {
MOZ_ASSERT(mTrack->IsEnded());
class EndedEventDispatcher final : public Runnable {
public:
explicit EndedEventDispatcher(AudioBufferSourceNode* aNode)
: mozilla::Runnable("EndedEventDispatcher"), mNode(aNode) {}
NS_IMETHOD Run() override {
// If it's not safe to run scripts right now, schedule this to run later
if (!nsContentUtils::IsSafeToRunScript()) {
nsContentUtils::AddScriptRunner(this);
return NS_OK;
}
mNode->DispatchTrustedEvent(u"ended"_ns);
// Release track resources.
mNode->DestroyMediaTrack();
return NS_OK;
}
private:
RefPtr<AudioBufferSourceNode> mNode;
};
Context()->Dispatch(do_AddRef(new EndedEventDispatcher(this)));
// Drop the playing reference
// Warning: The below line might delete this.
MarkInactive();
}
void AudioBufferSourceNode::SendLoopParametersToTrack() {
if (!mTrack) {
return;
}
// Don't compute and set the loop parameters unnecessarily
if (mLoop && mBuffer) {
float rate = mBuffer->SampleRate();
double length = (double(mBuffer->Length()) / mBuffer->SampleRate());
double actualLoopStart, actualLoopEnd;
if (mLoopStart >= 0.0 && mLoopEnd > 0.0 && mLoopStart < mLoopEnd) {
MOZ_ASSERT(mLoopStart != 0.0 || mLoopEnd != 0.0);
actualLoopStart = (mLoopStart > length) ? 0.0 : mLoopStart;
actualLoopEnd = std::min(mLoopEnd, length);
} else {
actualLoopStart = 0.0;
actualLoopEnd = length;
}
int32_t loopStartTicks = NS_lround(actualLoopStart * rate);
int32_t loopEndTicks = NS_lround(actualLoopEnd * rate);
if (loopStartTicks < loopEndTicks) {
SendInt32ParameterToTrack(LOOPSTART, loopStartTicks);
SendInt32ParameterToTrack(LOOPEND, loopEndTicks);
SendInt32ParameterToTrack(LOOP, 1);
} else {
// Be explicit about looping not happening if the offsets make
// looping impossible.
SendInt32ParameterToTrack(LOOP, 0);
}
} else {
SendInt32ParameterToTrack(LOOP, 0);
}
}
} // namespace mozilla::dom