Source code

Revision control

Copy as Markdown

Other Tools

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set ts=8 sts=2 et sw=2 tw=80: */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */
#include "mozilla/RangeUtils.h"
#include "mozilla/Assertions.h"
#include "mozilla/dom/AbstractRange.h"
#include "mozilla/dom/Document.h"
#include "mozilla/dom/ShadowRoot.h"
#include "nsContentUtils.h"
namespace mozilla {
using namespace dom;
template bool RangeUtils::IsValidPoints(const RangeBoundary& aStartBoundary,
const RangeBoundary& aEndBoundary);
template bool RangeUtils::IsValidPoints(const RangeBoundary& aStartBoundary,
const RawRangeBoundary& aEndBoundary);
template bool RangeUtils::IsValidPoints(const RawRangeBoundary& aStartBoundary,
const RangeBoundary& aEndBoundary);
template bool RangeUtils::IsValidPoints(const RawRangeBoundary& aStartBoundary,
const RawRangeBoundary& aEndBoundary);
template nsresult RangeUtils::CompareNodeToRangeBoundaries(
nsINode* aNode, const RangeBoundary& aStartBoundary,
const RangeBoundary& aEndBoundary, bool* aNodeIsBeforeRange,
bool* aNodeIsAfterRange);
template nsresult RangeUtils::CompareNodeToRangeBoundaries(
nsINode* aNode, const RangeBoundary& aStartBoundary,
const RawRangeBoundary& aEndBoundary, bool* aNodeIsBeforeRange,
bool* aNodeIsAfterRange);
template nsresult RangeUtils::CompareNodeToRangeBoundaries(
nsINode* aNode, const RawRangeBoundary& aStartBoundary,
const RangeBoundary& aEndBoundary, bool* aNodeIsBeforeRange,
bool* aNodeIsAfterRange);
template nsresult RangeUtils::CompareNodeToRangeBoundaries(
nsINode* aNode, const RawRangeBoundary& aStartBoundary,
const RawRangeBoundary& aEndBoundary, bool* aNodeIsBeforeRange,
bool* aNodeIsAfterRange);
// static
nsINode* RangeUtils::ComputeRootNode(nsINode* aNode) {
if (!aNode) {
return nullptr;
}
if (aNode->IsContent()) {
if (aNode->NodeInfo()->NameAtom() == nsGkAtoms::documentTypeNodeName) {
return nullptr;
}
nsIContent* content = aNode->AsContent();
// If the node is in a shadow tree then the ShadowRoot is the root.
//
// FIXME(emilio): Should this be after the NAC check below? We can have NAC
// inside Shadow DOM which will peek this path rather than the one below.
if (ShadowRoot* containingShadow = content->GetContainingShadow()) {
return containingShadow;
}
// If the node is in NAC, then the NAC parent should be the root.
if (nsINode* root =
content->GetClosestNativeAnonymousSubtreeRootParentOrHost()) {
return root;
}
}
// Elements etc. must be in document or in document fragment,
// text nodes in document, in document fragment or in attribute.
if (nsINode* root = aNode->GetUncomposedDoc()) {
return root;
}
NS_ASSERTION(!aNode->SubtreeRoot()->IsDocument(),
"GetUncomposedDoc should have returned a doc");
// We allow this because of backward compatibility.
return aNode->SubtreeRoot();
}
// static
template <typename SPT, typename SRT, typename EPT, typename ERT>
bool RangeUtils::IsValidPoints(
const RangeBoundaryBase<SPT, SRT>& aStartBoundary,
const RangeBoundaryBase<EPT, ERT>& aEndBoundary) {
// Use NS_WARN_IF() only for the cases where the arguments are unexpected.
if (NS_WARN_IF(!aStartBoundary.IsSetAndValid()) ||
NS_WARN_IF(!aEndBoundary.IsSetAndValid())) {
return false;
}
// Otherwise, don't use NS_WARN_IF() for preventing to make console messy.
// Instead, check one by one since it is easier to catch the error reason
// with debugger.
if (ComputeRootNode(aStartBoundary.Container()) !=
ComputeRootNode(aEndBoundary.Container())) {
return false;
}
const Maybe<int32_t> order =
nsContentUtils::ComparePoints(aStartBoundary, aEndBoundary);
if (!order) {
MOZ_ASSERT_UNREACHABLE();
return false;
}
return *order != 1;
}
// static
Maybe<bool> RangeUtils::IsNodeContainedInRange(nsINode& aNode,
AbstractRange* aAbstractRange) {
bool nodeIsBeforeRange{false};
bool nodeIsAfterRange{false};
const nsresult rv = CompareNodeToRange(&aNode, aAbstractRange,
&nodeIsBeforeRange, &nodeIsAfterRange);
if (NS_FAILED(rv)) {
return Nothing();
}
return Some(!nodeIsBeforeRange && !nodeIsAfterRange);
}
// Utility routine to detect if a content node is completely contained in a
// range If outNodeBefore is returned true, then the node starts before the
// range does. If outNodeAfter is returned true, then the node ends after the
// range does. Note that both of the above might be true. If neither are true,
// the node is contained inside of the range.
// XXX - callers responsibility to ensure node in same doc as range!
// static
nsresult RangeUtils::CompareNodeToRange(nsINode* aNode,
AbstractRange* aAbstractRange,
bool* aNodeIsBeforeRange,
bool* aNodeIsAfterRange) {
if (NS_WARN_IF(!aAbstractRange) ||
NS_WARN_IF(!aAbstractRange->IsPositioned())) {
return NS_ERROR_INVALID_ARG;
}
return CompareNodeToRangeBoundaries(
aNode, aAbstractRange->MayCrossShadowBoundaryStartRef(),
aAbstractRange->MayCrossShadowBoundaryEndRef(), aNodeIsBeforeRange,
aNodeIsAfterRange);
}
template <typename SPT, typename SRT, typename EPT, typename ERT>
nsresult RangeUtils::CompareNodeToRangeBoundaries(
nsINode* aNode, const RangeBoundaryBase<SPT, SRT>& aStartBoundary,
const RangeBoundaryBase<EPT, ERT>& aEndBoundary, bool* aNodeIsBeforeRange,
bool* aNodeIsAfterRange) {
MOZ_ASSERT(aNodeIsBeforeRange);
MOZ_ASSERT(aNodeIsAfterRange);
if (NS_WARN_IF(!aNode) ||
NS_WARN_IF(!aStartBoundary.IsSet() || !aEndBoundary.IsSet())) {
return NS_ERROR_INVALID_ARG;
}
// create a pair of dom points that expresses location of node:
// NODE(start), NODE(end)
// Let incoming range be:
// {RANGE(start), RANGE(end)}
// if (RANGE(start) <= NODE(start)) and (RANGE(end) => NODE(end))
// then the Node is contained (completely) by the Range.
// gather up the dom point info
int32_t nodeStart;
uint32_t nodeEnd;
nsINode* parent = aNode->GetParentNode();
if (!parent) {
// can't make a parent/offset pair to represent start or
// end of the root node, because it has no parent.
// so instead represent it by (node,0) and (node,numChildren)
parent = aNode;
nodeStart = 0;
nodeEnd = aNode->GetChildCount();
} else {
nodeStart = parent->ComputeIndexOf_Deprecated(aNode);
NS_WARNING_ASSERTION(
nodeStart >= 0,
"aNode has the parent node but it does not have aNode!");
nodeEnd = nodeStart + 1u;
MOZ_ASSERT(nodeStart < 0 || static_cast<uint32_t>(nodeStart) < nodeEnd,
"nodeStart should be less than nodeEnd");
}
// XXX nsContentUtils::ComparePoints() may be expensive. If some callers
// just want one of aNodeIsBeforeRange or aNodeIsAfterRange, we can
// skip the other comparison.
// In the ComparePoints calls below we use a container & offset instead of
// a range boundary because the range boundary constructor warns if you pass
// in a -1 offset and the ComputeIndexOf call above can return -1 if aNode
// is native anonymous content. ComparePoints has comments about offsets
// being -1 and it seems to deal with it, or at least we aren't aware of any
// problems arising because of it. We don't have a better idea how to get
// rid of the warning without much larger changes so we do this just to
// silence the warning. (Bug 1438996)
// is RANGE(start) <= NODE(start) ?
Maybe<int32_t> order = nsContentUtils::ComparePoints_AllowNegativeOffsets(
aStartBoundary.Container(),
*aStartBoundary.Offset(
RangeBoundaryBase<SPT, SRT>::OffsetFilter::kValidOrInvalidOffsets),
parent, nodeStart);
if (NS_WARN_IF(!order)) {
return NS_ERROR_DOM_WRONG_DOCUMENT_ERR;
}
*aNodeIsBeforeRange = *order > 0;
// is RANGE(end) >= NODE(end) ?
order = nsContentUtils::ComparePoints(
aEndBoundary.Container(),
*aEndBoundary.Offset(
RangeBoundaryBase<EPT, ERT>::OffsetFilter::kValidOrInvalidOffsets),
parent, nodeEnd);
if (NS_WARN_IF(!order)) {
return NS_ERROR_DOM_WRONG_DOCUMENT_ERR;
}
*aNodeIsAfterRange = *order < 0;
return NS_OK;
}
} // namespace mozilla