DXR is a code search and navigation tool aimed at making sense of large projects. It supports full-text and regex searches as well as structural queries.

Header

Untracked file

Line Code
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486
/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
// vim:cindent:sw=4:et:ts=8:
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is mozilla.org code.
 *
 * The Initial Developer of the Original Code is Netscape Communications Corp.
 * Portions created by the Initial Developer are Copyright (C) 1998
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *   Jim Nance
 *   L. David Baron - JP_REALTIME, JPROF_PTHREAD_HACK, and SIGUSR1 handling
 *   Mike Shaver - JP_RTC_HZ support
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

// The linux glibc hides part of sigaction if _POSIX_SOURCE is defined
#if defined(linux)
#undef _POSIX_SOURCE
#undef _SVID_SOURCE
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#endif

#include <errno.h>
#if defined(linux)
#include <linux/rtc.h>
#include <pthread.h>
#endif
#include <unistd.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <signal.h>
#include <sys/time.h>
#include <sys/types.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <ucontext.h>

#include "libmalloc.h"
#include "jprof.h"
#include <string.h>
#include <errno.h>
#include <dlfcn.h>


#ifdef NTO
#include <sys/link.h>
extern r_debug _r_debug;
#else
#include <link.h>
#endif

static int gLogFD = -1;
static pthread_t main_thread;

static void startSignalCounter(unsigned long millisec);
static int enableRTCSignals(bool enable);


//----------------------------------------------------------------------

#if defined(i386) || defined(_i386) || defined(__x86_64__)
static void CrawlStack(malloc_log_entry* me,
                       void* stack_top, void* top_instr_ptr)
{
  void **bp;
#if defined(__i386)
  __asm__( "movl %%ebp, %0" : "=g"(bp));
#elif defined(__x86_64__)
  __asm__( "movq %%rbp, %0" : "=g"(bp));
#else
  // It would be nice if this worked uniformly, but at least on i386 and
  // x86_64, it stopped working with gcc 4.1, because it points to the
  // end of the saved registers instead of the start.
  bp = __builtin_frame_address(0);
#endif
  u_long numpcs = 0;

  me->pcs[numpcs++] = (char*) top_instr_ptr;

  while (numpcs < MAX_STACK_CRAWL) {
    void** nextbp = (void**) *bp++;
    void* pc = *bp;
    if (nextbp < bp) {
      break;
    }
    if (bp > stack_top) {
      // Skip the signal handling.
      me->pcs[numpcs++] = (char*) pc;
    }
    bp = nextbp;
  }
  me->numpcs = numpcs;
}
#endif

//----------------------------------------------------------------------

static int rtcHz;
static int rtcFD = -1;

#if defined(linux) || defined(NTO)
static void DumpAddressMap()
{
  // Turn off the timer so we don't get interrupts during shutdown
#if defined(linux)
  if (rtcHz) {
    enableRTCSignals(false);
  } else
#endif
  {
    startSignalCounter(0);
  }

  int mfd = open(M_MAPFILE, O_CREAT|O_WRONLY|O_TRUNC, 0666);
  if (mfd >= 0) {
    malloc_map_entry mme;
    link_map* map = _r_debug.r_map;
    while (NULL != map) {
      if (map->l_name && *map->l_name) {
	mme.nameLen = strlen(map->l_name);
	mme.address = map->l_addr;
	write(mfd, &mme, sizeof(mme));
	write(mfd, map->l_name, mme.nameLen);
#if 0
	write(1, map->l_name, mme.nameLen);
	write(1, "\n", 1);
#endif
      }
      map = map->l_next;
    }
    close(mfd);
  }
}
#endif

static void EndProfilingHook(int signum)
{
    DumpAddressMap();
    puts("Jprof: profiling paused.");
}

//----------------------------------------------------------------------

static void
Log(u_long aTime, void* stack_top, void* top_instr_ptr)
{
  // Static is simply to make debugging tollerable
  static malloc_log_entry me;

  me.delTime = aTime;

  CrawlStack(&me, stack_top, top_instr_ptr);

#ifndef NTO
  write(gLogFD, &me, offsetof(malloc_log_entry, pcs) + me.numpcs*sizeof(char*));
#else
  printf("Neutrino is missing the pcs member of malloc_log_entry!! \n");
#endif
}

static int realTime;

/* Lets interrupt at 10 Hz.  This is so my log files don't get too large.
 * This can be changed to a faster value latter.  This timer is not
 * programmed to reset, even though it is capable of doing so.  This is
 * to keep from getting interrupts from inside of the handler.
*/
static void startSignalCounter(unsigned long millisec)
{
    struct itimerval tvalue;

    tvalue.it_interval.tv_sec = 0;
    tvalue.it_interval.tv_usec = 0;
    tvalue.it_value.tv_sec = millisec/1000;
    tvalue.it_value.tv_usec = (millisec%1000)*1000;

    if (realTime) {
	setitimer(ITIMER_REAL, &tvalue, NULL);
    } else {
    	setitimer(ITIMER_PROF, &tvalue, NULL);
    }
}

static long timerMiliSec = 50;

#if defined(linux)
static int setupRTCSignals(int hz, struct sigaction *sap)
{
    /* global */ rtcFD = open("/dev/rtc", O_RDONLY);
    if (rtcFD < 0) {
        perror("JPROF_RTC setup: open(\"/dev/rtc\", O_RDONLY)");
        return 0;
    }

    if (sigaction(SIGIO, sap, NULL) == -1) {
        perror("JPROF_RTC setup: sigaction(SIGIO)");
        return 0;
    }

    if (ioctl(rtcFD, RTC_IRQP_SET, hz) == -1) {
        perror("JPROF_RTC setup: ioctl(/dev/rtc, RTC_IRQP_SET, $JPROF_RTC_HZ)");
        return 0;
    }

    if (ioctl(rtcFD, RTC_PIE_ON, 0) == -1) {
        perror("JPROF_RTC setup: ioctl(/dev/rtc, RTC_PIE_ON)");
        return 0;
    }

    if (fcntl(rtcFD, F_SETSIG, 0) == -1) {
        perror("JPROF_RTC setup: fcntl(/dev/rtc, F_SETSIG, 0)");
        return 0;
    }

    if (fcntl(rtcFD, F_SETOWN, getpid()) == -1) {
        perror("JPROF_RTC setup: fcntl(/dev/rtc, F_SETOWN, getpid())");
        return 0;
    }

    return 1;
}

static int enableRTCSignals(bool enable)
{
    static bool enabled = false;
    if (enabled == enable) {
        return 0;
    }
    enabled = enable;
    
    int flags = fcntl(rtcFD, F_GETFL);
    if (flags < 0) {
        perror("JPROF_RTC setup: fcntl(/dev/rtc, F_GETFL)");
        return 0;
    }

    if (enable) {
        flags |= FASYNC;
    } else {
        flags &= ~FASYNC;
    }

    if (fcntl(rtcFD, F_SETFL, flags) == -1) {
        if (enable) {
            perror("JPROF_RTC setup: fcntl(/dev/rtc, F_SETFL, flags | FASYNC)");
        } else {
            perror("JPROF_RTC setup: fcntl(/dev/rtc, F_SETFL, flags & ~FASYNC)");
        }            
        return 0;
    }

    return 1;
}
#endif

static void StackHook(
int signum,
siginfo_t *info,
void *ucontext)
{
    static struct timeval tFirst;
    static int first=1;
    size_t millisec = 0;

#if defined(linux)
    if (rtcHz && pthread_self() != main_thread) {
      // Only collect stack data on the main thread, for now.
      return;
    }
#endif

    if(first && !(first=0)) {
        puts("Jprof: received first signal");
#if defined(linux)
        if (rtcHz) {
            enableRTCSignals(true);
        } else
#endif
        {
            gettimeofday(&tFirst, 0);
            millisec = 0;
        }
    } else {
#if defined(linux)
        if (rtcHz) {
            enableRTCSignals(true);
        } else
#endif
        {
            struct timeval tNow;
            gettimeofday(&tNow, 0);
            double usec = 1e6*(tNow.tv_sec - tFirst.tv_sec);
            usec += (tNow.tv_usec - tFirst.tv_usec);
            millisec = static_cast<size_t>(usec*1e-3);
        }
    }

    gregset_t &gregs = ((ucontext_t*)ucontext)->uc_mcontext.gregs;
#ifdef __x86_64__
    Log(millisec, (void*)gregs[REG_RSP], (void*)gregs[REG_RIP]);
#else
    Log(millisec, (void*)gregs[REG_ESP], (void*)gregs[REG_EIP]);
#endif

    if (!rtcHz)
        startSignalCounter(timerMiliSec);
}

NS_EXPORT_(void) setupProfilingStuff(void)
{
    static int gFirstTime = 1;
    if(gFirstTime && !(gFirstTime=0)) {
	int  startTimer = 1;
	int  doNotStart = 1;
	int  firstDelay = 0;
        int  append = O_TRUNC;
        char *tst  = getenv("JPROF_FLAGS");

	/* Options from JPROF_FLAGS environment variable:
	 *   JP_DEFER  -> Wait for a SIGPROF (or SIGALRM, if JP_REALTIME
	 *               is set) from userland before starting
	 *               to generate them internally
	 *   JP_START  -> Install the signal handler
	 *   JP_PERIOD -> Time between profiler ticks
	 *   JP_FIRST  -> Extra delay before starting
	 *   JP_REALTIME -> Take stack traces in intervals of real time
	 *               rather than time used by the process (and the
	 *               system for the process).  This is useful for
	 *               finding time spent by the X server.
         *   JP_APPEND -> Append to jprof-log rather than overwriting it.
         *               This is somewhat risky since it depends on the
         *               address map staying constant across multiple runs.
	*/
	if(tst) {
	    if(strstr(tst, "JP_DEFER"))
	    {
		doNotStart = 0;
		startTimer = 0;
	    }
	    if(strstr(tst, "JP_START")) doNotStart = 0;
	    if(strstr(tst, "JP_REALTIME")) realTime = 1;
	    if(strstr(tst, "JP_APPEND")) append = O_APPEND;

	    char *delay = strstr(tst,"JP_PERIOD=");
	    if(delay) {
	        double tmp = strtod(delay+10, NULL);
		if(tmp>1e-3) {
		    timerMiliSec = static_cast<unsigned long>(1000 * tmp);
		}
	    }

	    char *first = strstr(tst, "JP_FIRST=");
	    if(first) {
	        firstDelay = atol(first+9);
	    }

            char *rtc = strstr(tst, "JP_RTC_HZ=");
            if (rtc) {
#if defined(linux)
                rtcHz = atol(rtc+10);
                timerMiliSec = 0; /* This makes JP_FIRST work right. */
                realTime = 1; /* It's the _R_TC and all.  ;) */

#define IS_POWER_OF_TWO(x) (((x) & ((x) - 1)) == 0)

                if (!IS_POWER_OF_TWO(rtcHz) || rtcHz < 2) {
                    fprintf(stderr, "JP_RTC_HZ must be power of two and >= 2, "
                            "but %d was provided; using default of 2048\n",
                            rtcHz);
                    rtcHz = 2048;
                }
#else
                fputs("JP_RTC_HZ found, but RTC profiling only supported on "
                      "Linux!\n", stderr);
                  
#endif
            }
	}

	if(!doNotStart) {

	    if(gLogFD<0) {
		gLogFD = open(M_LOGFILE, O_CREAT | O_WRONLY | append, 0666);
		if(gLogFD<0) {
		    fprintf(stderr, "Unable to create " M_LOGFILE);
		    perror(":");
		} else {
		    struct sigaction action;
		    sigset_t mset;

		    // Dump out the address map when we terminate
		    atexit(DumpAddressMap);

		    main_thread = pthread_self();

		    sigemptyset(&mset);
		    action.sa_handler = NULL;
		    action.sa_sigaction = StackHook;
		    action.sa_mask  = mset;
		    action.sa_flags = SA_RESTART | SA_SIGINFO;
#if defined(linux)
                    if (rtcHz) {
                        if (!setupRTCSignals(rtcHz, &action)) {
                            fputs("jprof: Error initializing RTC, NOT "
                                  "profiling\n", stderr);
                            return;
                        }
                    }

                    if (!rtcHz || firstDelay != 0)
#endif
                    if (realTime) {
                        sigaction(SIGALRM, &action, NULL);
                    } else {
                        sigaction(SIGPROF, &action, NULL);
                    }

		    // make it so a SIGUSR1 will stop the profiling
		    // Note:  It currently does not close the logfile.
		    // This could be configurable (so that it could
		    // later be reopened).

		    struct sigaction stop_action;
		    stop_action.sa_handler = EndProfilingHook;
		    stop_action.sa_mask  = mset;
		    stop_action.sa_flags = SA_RESTART;
		    sigaction(SIGUSR1, &stop_action, NULL);

                    printf("Jprof: Initialized signal handler and set "
                           "timer for %lu %s, %d s "
                           "initial delay\n",
                           rtcHz ? rtcHz : timerMiliSec, 
                           rtcHz ? "Hz" : "ms",
                           firstDelay);

		    if(startTimer) {
#if defined(linux)
                        /* If we have an initial delay we can just use
                           startSignalCounter to set up a timer to fire the
                           first stackHook after that delay.  When that happens
                           we'll go and switch to RTC profiling. */
                        if (rtcHz && firstDelay == 0) {
                            puts("Jprof: enabled RTC signals");
                            enableRTCSignals(true);
                        } else
#endif
                        {
                            puts("Jprof: started timer");
                            startSignalCounter(firstDelay*1000 + timerMiliSec);
                        }
		    }
		}
	    }
	}
    } else {
        printf("setupProfilingStuff() called multiple times\n");
    }
}