Revision control
Copy as Markdown
Other Tools
/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
#include <stdio.h>
#include "mimei.h"
#include "prmem.h"
#include "mimeobj.h"
#include "mozilla/RangedPtr.h"
#include "mozilla/mailnews/MimeEncoder.h"
#include "modmimee.h" // for MimeConverterOutputCallback
typedef enum mime_encoding {
mime_Base64,
mime_QuotedPrintable,
mime_uuencode,
mime_yencode
} mime_encoding;
typedef enum mime_decoder_state {
DS_BEGIN,
DS_BODY,
DS_END
} mime_decoder_state;
struct MimeDecoderData {
mime_encoding encoding; /* Which encoding to use */
/* A read-buffer used for QP and B64. */
char token[4];
int token_size;
/* State and read-buffer used for uudecode and yencode. */
mime_decoder_state ds_state;
char* line_buffer;
int line_buffer_size;
MimeObject* objectToDecode; // might be null, only used for QP currently
/* Where to write the decoded data */
MimeConverterOutputCallback write_buffer;
void* closure;
};
static int mime_decode_qp_buffer(MimeDecoderData* data, const char* buffer,
int32_t length, int32_t* outSize) {
/* Warning, we are overwriting the buffer which was passed in.
This is ok, because decoding these formats will never result
in larger data than the input, only smaller. */
const char* in = buffer;
char* out = (char*)buffer;
char token[3];
int i;
NS_ASSERTION(data->encoding == mime_QuotedPrintable,
"1.1 <rhp@netscape.com> 19 Mar 1999 12:00");
if (data->encoding != mime_QuotedPrintable) return -1;
/* For the first pass, initialize the token from the unread-buffer. */
i = 0;
while (i < 3 && data->token_size > 0) {
token[i] = data->token[i];
data->token_size--;
i++;
}
/* #### BUG: when decoding quoted-printable, we are required to
strip trailing whitespace from lines -- since when encoding in
qp, one is required to quote such trailing whitespace, any
trailing whitespace which remains must have been introduced
by a stupid gateway. */
/* Treat null bytes as spaces when format_out is
bool treatNullAsSpace =
data->objectToDecode && data->objectToDecode->options->format_out ==
nsMimeOutput::nsMimeMessageBodyDisplay;
while (length > 0 || i != 0) {
while (i < 3 && length > 0) {
token[i++] = *in;
in++;
length--;
}
if (i < 3) {
/* Didn't get enough for a complete token.
If it might be a token, unread it.
Otherwise, just dump it.
*/
memcpy(data->token, token, i);
data->token_size = i;
i = 0;
length = 0;
break;
}
i = 0;
if (token[0] == '=') {
unsigned char c = 0;
if (token[1] >= '0' && token[1] <= '9')
c = token[1] - '0';
else if (token[1] >= 'A' && token[1] <= 'F')
c = token[1] - ('A' - 10);
else if (token[1] >= 'a' && token[1] <= 'f')
c = token[1] - ('a' - 10);
else if (token[1] == '\r' || token[1] == '\n') {
/* =\n means ignore the newline. */
if (token[1] == '\r' && token[2] == '\n')
; /* swallow all three chars */
else {
in--; /* put the third char back */
length++;
}
continue;
} else {
/* = followed by something other than hex or newline -
pass it through unaltered, I guess. (But, if
this bogus token happened to occur over a buffer
boundary, we can't do this, since we don't have
space for it. Oh well. Screw it.) */
if (in > out) *out++ = token[0];
if (in > out) *out++ = token[1];
if (in > out) *out++ = token[2];
continue;
}
/* Second hex digit */
c = (c << 4);
if (token[2] >= '0' && token[2] <= '9')
c += token[2] - '0';
else if (token[2] >= 'A' && token[2] <= 'F')
c += token[2] - ('A' - 10);
else if (token[2] >= 'a' && token[2] <= 'f')
c += token[2] - ('a' - 10);
else {
/* We got =xy where "x" was hex and "y" was not, so
treat that as a literal "=", x, and y. (But, if
this bogus token happened to occur over a buffer
boundary, we can't do this, since we don't have
space for it. Oh well. Screw it.) */
if (in > out) *out++ = token[0];
if (in > out) *out++ = token[1];
if (in > out) *out++ = token[2];
continue;
}
*out++ = c ? (char)c : ((treatNullAsSpace) ? ' ' : (char)c);
} else {
*out++ = token[0];
token[0] = token[1];
token[1] = token[2];
i = 2;
}
}
// Fill the size
if (outSize) *outSize = out - buffer;
/* Now that we've altered the data in place, write it. */
if (out > buffer)
return data->write_buffer(buffer, (out - buffer), data->closure);
else
return 1;
}
static int mime_decode_base64_token(const char* in, char* out) {
/* reads 4, writes 0-3. Returns bytes written.
(Writes less than 3 only at EOF.) */
int j;
int eq_count = 0;
unsigned long num = 0;
for (j = 0; j < 4; j++) {
unsigned char c = 0;
if (in[j] >= 'A' && in[j] <= 'Z')
c = in[j] - 'A';
else if (in[j] >= 'a' && in[j] <= 'z')
c = in[j] - ('a' - 26);
else if (in[j] >= '0' && in[j] <= '9')
c = in[j] - ('0' - 52);
else if (in[j] == '+')
c = 62;
else if (in[j] == '/')
c = 63;
else if (in[j] == '=') {
c = 0;
eq_count++;
} else
NS_ERROR("Invalid character");
num = (num << 6) | c;
}
*out++ = (char)(num >> 16);
*out++ = (char)((num >> 8) & 0xFF);
*out++ = (char)(num & 0xFF);
if (eq_count == 0)
return 3; /* No "=" padding means 4 bytes mapped to 3. */
else if (eq_count == 1)
return 2; /* "xxx=" means 3 bytes mapped to 2. */
else if (eq_count == 2)
return 1; /* "xx==" means 2 bytes mapped to 1. */
else {
// "x===" can't happen, because "x" would then be encoding only
// 6 bits, not the min of 8.
NS_ERROR("Count is 6 bits, should be at least 8");
return 1;
}
}
static int mime_decode_base64_buffer(MimeDecoderData* data, const char* buffer,
int32_t length, int32_t* outSize) {
if (outSize) *outSize = 0;
// Without input there is nothing to do.
if (length == 0) return 1;
/* Warning, we are overwriting the buffer which was passed in.
This is ok, because decoding these formats will never result
in larger data than the input, only smaller. */
const char* in = buffer;
char* out = (char*)buffer;
char token[4];
int i;
bool leftover = (data->token_size > 0);
NS_ASSERTION(data->encoding == mime_Base64,
"1.1 <rhp@netscape.com> 19 Mar 1999 12:00");
/* For the first pass, initialize the token from the unread-buffer. */
i = 0;
while (i < 4 && data->token_size > 0) {
token[i] = data->token[i];
data->token_size--;
i++;
}
while (length > 0) {
while (i < 4 && length > 0) {
if ((*in >= 'A' && *in <= 'Z') || (*in >= 'a' && *in <= 'z') ||
(*in >= '0' && *in <= '9') || *in == '+' || *in == '/' || *in == '=')
token[i++] = *in;
in++;
length--;
}
if (i < 4) {
/* Didn't get enough for a complete token. */
memcpy(data->token, token, i);
data->token_size = i;
length = 0;
break;
}
i = 0;
if (leftover) {
/* If there are characters left over from the last time around,
we might not have space in the buffer to do our dirty work
(if there were 2 or 3 left over, then there is only room for
1 or 2 in the buffer right now, and we need 3.) This is only
a problem for the first chunk in each buffer, so in that
case, just write prematurely. */
int n;
n = mime_decode_base64_token(token, token);
if (outSize) *outSize += n;
n = data->write_buffer(token, n, data->closure);
if (n < 0) /* abort */
return n;
/* increment buffer so that we don't write the 1 or 2 unused
characters now at the front. */
buffer = in;
out = (char*)buffer;
leftover = false;
} else {
int n = mime_decode_base64_token(token, out);
/* Advance "out" by the number of bytes just written to it. */
out += n;
}
}
if (outSize) *outSize += out - buffer;
/* Now that we've altered the data in place, write it. */
if (out > buffer)
return data->write_buffer(buffer, (out - buffer), data->closure);
else
return 1;
}
static int mime_decode_uue_buffer(MimeDecoderData* data,
const char* input_buffer,
int32_t input_length, int32_t* outSize) {
/* First, copy input_buffer into state->line_buffer until we have
a complete line.
Then decode that line in place (in the line_buffer) and write
it out.
Then pull the next line into line_buffer and continue.
*/
if (!data->line_buffer) {
data->line_buffer_size = 128;
data->line_buffer = (char*)PR_MALLOC(data->line_buffer_size);
if (!data->line_buffer) return -1;
data->line_buffer[0] = 0;
}
int status = 0;
char* line = data->line_buffer;
char* line_end = data->line_buffer + data->line_buffer_size - 1;
NS_ASSERTION(data->encoding == mime_uuencode,
"1.1 <rhp@netscape.com> 19 Mar 1999 12:00");
if (data->encoding != mime_uuencode) return -1;
if (data->ds_state == DS_END) {
status = 0;
goto DONE;
}
while (input_length > 0) {
/* Copy data from input_buffer to `line' until we have a complete line,
or until we've run out of input.
(line may have data in it already if the last time we were called,
we weren't called with a buffer that ended on a line boundary.)
*/
{
char* out = line + strlen(line);
while (input_length > 0 && out < line_end) {
*out++ = *input_buffer++;
input_length--;
if (out[-1] == '\r' || out[-1] == '\n') {
/* If we just copied a CR, and an LF is waiting, grab it too.
*/
if (out[-1] == '\r' && input_length > 0 && *input_buffer == '\n') {
input_buffer++;
input_length--;
}
/* We have a line. */
break;
}
}
*out = 0;
/* Ignore blank lines.
*/
if (*line == '\r' || *line == '\n') {
*line = 0;
continue;
}
/* If this line was bigger than our buffer, truncate it.
(This means the data was way corrupted, and there's basically
no chance of decoding it properly, but give it a shot anyway.)
*/
if (out == line_end) {
out--;
out[-1] = '\r';
out[0] = 0;
}
/* If we didn't get a complete line, simply return; we'll be called
with the rest of this line next time.
*/
if (out[-1] != '\r' && out[-1] != '\n') {
NS_ASSERTION(input_length == 0,
"1.1 <rhp@netscape.com> 19 Mar 1999 12:00");
break;
}
}
/* Now we have a complete line. Deal with it.
*/
if (data->ds_state == DS_BODY && line[0] == 'e' && line[1] == 'n' &&
line[2] == 'd' && (line[3] == '\r' || line[3] == '\n')) {
/* done! */
data->ds_state = DS_END;
*line = 0;
break;
} else if (data->ds_state == DS_BEGIN) {
if (!strncmp(line, "begin ", 6)) data->ds_state = DS_BODY;
*line = 0;
continue;
} else {
/* We're in DS_BODY. Decode the line. */
char *in, *out;
int32_t i;
long lost;
NS_ASSERTION(data->ds_state == DS_BODY,
"1.1 <rhp@netscape.com> 19 Mar 1999 12:00");
/* We map down `line', reading four bytes and writing three.
That means that `out' always stays safely behind `in'.
*/
in = line;
out = line;
#undef DEC
#define DEC(c) (((c) - ' ') & 077)
i = DEC(*in); /* get length */
/* all the parens and casts are because gcc was doing something evil.
*/
lost = ((long)i) - (((((long)strlen(in)) - 2L) * 3L) / 4L);
if (lost > 0) /* Short line!! */
{
/* If we get here, then the line is shorter than the length byte
at the beginning says it should be. However, the case where
the line is short because it was at the end of the buffer and
we didn't get the whole line was handled earlier (up by the
"didn't get a complete line" comment.) So if we've gotten
here, then this is a complete line which is internally
inconsistent. We will parse from it what we can...
This probably happened because some gateway stripped trailing
whitespace from the end of the line -- so pretend the line
was padded with spaces (which map to \000.)
*/
i -= lost;
}
for (++in; i > 0; in += 4, i -= 3) {
char ch;
NS_ASSERTION(out <= in, "1.1 <rhp@netscape.com> 19 Mar 1999 12:00");
if (i >= 3) {
/* We read four; write three. */
ch = DEC(in[0]) << 2 | DEC(in[1]) >> 4;
*out++ = ch;
NS_ASSERTION(out <= in + 1,
"1.1 <rhp@netscape.com> 19 Mar 1999 12:00");
ch = DEC(in[1]) << 4 | DEC(in[2]) >> 2;
*out++ = ch;
NS_ASSERTION(out <= in + 2,
"1.1 <rhp@netscape.com> 19 Mar 1999 12:00");
ch = DEC(in[2]) << 6 | DEC(in[3]);
*out++ = ch;
NS_ASSERTION(out <= in + 3,
"1.1 <rhp@netscape.com> 19 Mar 1999 12:00");
} else {
/* Handle a line that isn't a multiple of 4 long.
(We read 1, 2, or 3, and will write 1 or 2.)
*/
NS_ASSERTION(i > 0 && i < 3,
"1.1 <rhp@netscape.com> 19 Mar 1999 12:00");
ch = DEC(in[0]) << 2 | DEC(in[1]) >> 4;
*out++ = ch;
NS_ASSERTION(out <= in + 1,
"1.1 <rhp@netscape.com> 19 Mar 1999 12:00");
if (i == 2) {
ch = DEC(in[1]) << 4 | DEC(in[2]) >> 2;
*out++ = ch;
NS_ASSERTION(out <= in + 2,
"1.1 <rhp@netscape.com> 19 Mar 1999 12:00");
}
}
}
/* If the line was truncated, pad the missing bytes with 0 (SPC). */
while (lost > 0) {
*out++ = 0;
lost--;
in = out + 1; /* just to prevent the assert, below. */
}
#undef DEC
/* Now write out what we decoded for this line.
*/
NS_ASSERTION(out >= line && out < in,
"1.1 <rhp@netscape.com> 19 Mar 1999 12:00");
if (out > line)
status = data->write_buffer(line, (out - line), data->closure);
// The assertion above tells us this is >= 0
if (outSize) *outSize = out - line;
/* Reset the line so that we don't think it's partial next time. */
*line = 0;
if (status < 0) /* abort */
goto DONE;
}
}
status = 1;
DONE:
return status;
}
static int mime_decode_yenc_buffer(MimeDecoderData* data,
const char* input_buffer,
int32_t input_length, int32_t* outSize) {
/* First, copy input_buffer into state->line_buffer until we have
a complete line.
Then decode that line in place (in the line_buffer) and write
it out.
Then pull the next line into line_buffer and continue.
*/
if (!data->line_buffer) {
data->line_buffer_size =
1000; // let make sure we have plenty of space for the header line
data->line_buffer = (char*)PR_MALLOC(data->line_buffer_size);
if (!data->line_buffer) return -1;
data->line_buffer[0] = 0;
}
int status = 0;
char* line = data->line_buffer;
char* line_end = data->line_buffer + data->line_buffer_size - 1;
NS_ASSERTION(data->encoding == mime_yencode, "wrong decoder!");
if (data->encoding != mime_yencode) return -1;
if (data->ds_state == DS_END) return 0;
while (input_length > 0) {
/* Copy data from input_buffer to `line' until we have a complete line,
or until we've run out of input.
(line may have data in it already if the last time we were called,
we weren't called with a buffer that ended on a line boundary.)
*/
{
char* out = line + strlen(line);
while (input_length > 0 && out < line_end) {
*out++ = *input_buffer++;
input_length--;
if (out[-1] == '\r' || out[-1] == '\n') {
/* If we just copied a CR, and an LF is waiting, grab it too. */
if (out[-1] == '\r' && input_length > 0 && *input_buffer == '\n') {
input_buffer++;
input_length--;
}
/* We have a line. */
break;
}
}
*out = 0;
/* Ignore blank lines. */
if (*line == '\r' || *line == '\n') {
*line = 0;
continue;
}
/* If this line was bigger than our buffer, truncate it.
(This means the data was way corrupted, and there's basically
no chance of decoding it properly, but give it a shot anyway.)
*/
if (out == line_end) {
out--;
out[-1] = '\r';
out[0] = 0;
}
/* If we didn't get a complete line, simply return; we'll be called
with the rest of this line next time.
*/
if (out[-1] != '\r' && out[-1] != '\n') {
NS_ASSERTION(input_length == 0, "empty buffer!");
break;
}
}
/* Now we have a complete line. Deal with it.
*/
const char* endOfLine = line + strlen(line);
if (data->ds_state == DS_BEGIN) {
int new_line_size = 0;
/* this yenc decoder does not support yenc v2 or multipart yenc.
Therefore, we are looking first for "=ybegin line="
*/
if ((endOfLine - line) >= 13 && !strncmp(line, "=ybegin line=", 13)) {
/* ...then couple digits. */
for (line += 13; line < endOfLine; line++) {
if (*line < '0' || *line > '9') break;
new_line_size = (new_line_size * 10) + *line - '0';
}
/* ...next, look for <space>size= */
if ((endOfLine - line) >= 6 && !strncmp(line, " size=", 6)) {
/* ...then couple digits. */
for (line += 6; line < endOfLine; line++)
if (*line < '0' || *line > '9') break;
/* ...next, look for <space>name= */
if ((endOfLine - line) >= 6 && !strncmp(line, " name=", 6)) {
/* we have found the yenc header line.
Now check if we need to grow our buffer line
*/
data->ds_state = DS_BODY;
if (new_line_size > data->line_buffer_size &&
new_line_size <= 997) /* don't let bad value hurt us! */
{
PR_Free(data->line_buffer);
data->line_buffer_size =
new_line_size +
4; // extra chars for line ending and potential escape char
data->line_buffer = (char*)PR_MALLOC(data->line_buffer_size);
if (!data->line_buffer) return -1;
}
}
}
}
*data->line_buffer = 0;
continue;
}
if (data->ds_state == DS_BODY && line[0] == '=') {
/* look if this this the final line */
if (!strncmp(line, "=yend size=", 11)) {
/* done! */
data->ds_state = DS_END;
*line = 0;
break;
}
}
/* We're in DS_BODY. Decode the line in place. */
{
char* src = line;
char* dest = src;
char c;
for (; src < line_end; src++) {
c = *src;
if (!c || c == '\r' || c == '\n') break;
if (c == '=') {
src++;
c = *src;
if (c == 0) return -1; /* last character cannot be escape char */
c -= 64;
}
c -= 42;
*dest = c;
dest++;
}
// The assertion below is helpful, too
if (outSize) *outSize = dest - line;
/* Now write out what we decoded for this line. */
NS_ASSERTION(dest >= line && dest <= src, "nothing to write!");
if (dest > line) {
status = data->write_buffer(line, dest - line, data->closure);
if (status < 0) /* abort */
return status;
}
/* Reset the line so that we don't think it's partial next time. */
*line = 0;
}
}
return 1;
}
int MimeDecoderDestroy(MimeDecoderData* data, bool abort_p) {
int status = 0;
/* Flush out the last few buffered characters. */
if (!abort_p && data->token_size > 0 && data->token[0] != '=') {
if (data->encoding == mime_Base64)
while ((unsigned int)data->token_size < sizeof(data->token))
data->token[data->token_size++] = '=';
status = data->write_buffer(data->token, data->token_size, data->closure);
}
if (data->line_buffer) PR_Free(data->line_buffer);
PR_Free(data);
return status;
}
static MimeDecoderData* mime_decoder_init(mime_encoding which,
MimeConverterOutputCallback output_fn,
void* closure) {
MimeDecoderData* data = PR_NEW(MimeDecoderData);
if (!data) return 0;
memset(data, 0, sizeof(*data));
data->encoding = which;
data->write_buffer = output_fn;
data->closure = closure;
data->line_buffer_size = 0;
data->line_buffer = nullptr;
return data;
}
MimeDecoderData* MimeB64DecoderInit(MimeConverterOutputCallback output_fn,
void* closure) {
return mime_decoder_init(mime_Base64, output_fn, closure);
}
MimeDecoderData* MimeQPDecoderInit(MimeConverterOutputCallback output_fn,
void* closure, MimeObject* object) {
MimeDecoderData* retData =
mime_decoder_init(mime_QuotedPrintable, output_fn, closure);
if (retData) retData->objectToDecode = object;
return retData;
}
MimeDecoderData* MimeUUDecoderInit(MimeConverterOutputCallback output_fn,
void* closure) {
return mime_decoder_init(mime_uuencode, output_fn, closure);
}
MimeDecoderData* MimeYDecoderInit(MimeConverterOutputCallback output_fn,
void* closure) {
return mime_decoder_init(mime_yencode, output_fn, closure);
}
int MimeDecoderWrite(MimeDecoderData* data, const char* buffer, int32_t size,
int32_t* outSize) {
NS_ASSERTION(data, "1.1 <rhp@netscape.com> 19 Mar 1999 12:00");
if (!data) return -1;
switch (data->encoding) {
case mime_Base64:
return mime_decode_base64_buffer(data, buffer, size, outSize);
case mime_QuotedPrintable:
return mime_decode_qp_buffer(data, buffer, size, outSize);
case mime_uuencode:
return mime_decode_uue_buffer(data, buffer, size, outSize);
case mime_yencode:
return mime_decode_yenc_buffer(data, buffer, size, outSize);
default:
NS_ERROR("Invalid decoding");
return -1;
}
}
namespace mozilla {
namespace mailnews {
MimeEncoder::MimeEncoder(OutputCallback callback, void* closure)
: mCallback(callback), mClosure(closure), mCurrentColumn(0) {}
class Base64Encoder : public MimeEncoder {
unsigned char in_buffer[3];
int32_t in_buffer_count;
public:
Base64Encoder(OutputCallback callback, void* closure)
: MimeEncoder(callback, closure), in_buffer_count(0) {}
virtual ~Base64Encoder() {}
virtual nsresult Write(const char* buffer, int32_t size) override;
virtual nsresult Flush() override;
private:
static void Base64EncodeBits(RangedPtr<char>& out, uint32_t bits);
};
nsresult Base64Encoder::Write(const char* buffer, int32_t size) {
if (size == 0)
return NS_OK;
else if (size < 0) {
NS_ERROR("Size is less than 0");
return NS_ERROR_FAILURE;
}
// If this input buffer is too small, wait until next time.
if (size < (3 - in_buffer_count)) {
NS_ASSERTION(size == 1 || size == 2, "Unexpected size");
in_buffer[in_buffer_count++] = buffer[0];
if (size == 2) in_buffer[in_buffer_count++] = buffer[1];
NS_ASSERTION(in_buffer_count < 3, "Unexpected out buffer size");
return NS_OK;
}
// If there are bytes that were put back last time, take them now.
uint32_t i = in_buffer_count, bits = 0;
if (in_buffer_count > 0) bits = in_buffer[0];
if (in_buffer_count > 1) bits = (bits << 8) + in_buffer[1];
in_buffer_count = 0;
// If this buffer is not a multiple of three, put one or two bytes back.
uint32_t excess = ((size + i) % 3);
if (excess) {
in_buffer[0] = buffer[size - excess];
if (excess > 1) in_buffer[1] = buffer[size - excess + 1];
in_buffer_count = excess;
size -= excess;
NS_ASSERTION(!((size + i) % 3), "1.1 <rhp@netscape.com> 19 Mar 1999 12:00");
}
const uint8_t* in = (const uint8_t*)buffer;
const uint8_t* end = (const uint8_t*)(buffer + size);
MOZ_ASSERT((end - in + i) % 3 == 0, "Need a multiple of 3 bytes to decode");
// Populate the out_buffer with base64 data, one line at a time.
char out_buffer[80]; // Max line length will be 80, so this is safe.
RangedPtr<char> out(out_buffer);
while (in < end) {
// Accumulate the input bits.
while (i < 3) {
bits = (bits << 8) | *in++;
i++;
}
i = 0;
Base64EncodeBits(out, bits);
mCurrentColumn += 4;
if (mCurrentColumn >= 72) {
// Do a linebreak before column 76. Flush out the line buffer.
mCurrentColumn = 0;
*out++ = '\x0D';
*out++ = '\x0A';
nsresult rv = mCallback(out_buffer, (out.get() - out_buffer), mClosure);
NS_ENSURE_SUCCESS(rv, rv);
out = out_buffer;
}
}
// Write out the unwritten portion of the last line buffer.
if (out.get() > out_buffer) {
nsresult rv = mCallback(out_buffer, out.get() - out_buffer, mClosure);
NS_ENSURE_SUCCESS(rv, rv);
}
return NS_OK;
}
nsresult Base64Encoder::Flush() {
if (in_buffer_count == 0) return NS_OK;
// Since we need to some buffering to get a multiple of three bytes on each
// block, there may be a few bytes left in the buffer after the last block has
// been written. We need to flush those out now.
char buf[4];
RangedPtr<char> out(buf);
uint32_t bits = ((uint32_t)in_buffer[0]) << 16;
if (in_buffer_count > 1) bits |= (((uint32_t)in_buffer[1]) << 8);
Base64EncodeBits(out, bits);
// Pad with equal-signs.
if (in_buffer_count == 1) buf[2] = '=';
buf[3] = '=';
return mCallback(buf, 4, mClosure);
}
void Base64Encoder::Base64EncodeBits(RangedPtr<char>& out, uint32_t bits) {
// Convert 3 bytes to 4 base64 bytes
for (int32_t j = 18; j >= 0; j -= 6) {
unsigned int k = (bits >> j) & 0x3F;
if (k < 26)
*out++ = k + 'A';
else if (k < 52)
*out++ = k - 26 + 'a';
else if (k < 62)
*out++ = k - 52 + '0';
else if (k == 62)
*out++ = '+';
else if (k == 63)
*out++ = '/';
else
MOZ_CRASH("6 bits should only be between 0 and 64");
}
}
class QPEncoder : public MimeEncoder {
public:
QPEncoder(OutputCallback callback, void* closure)
: MimeEncoder(callback, closure) {}
virtual ~QPEncoder() {}
virtual nsresult Write(const char* buffer, int32_t size) override;
};
nsresult QPEncoder::Write(const char* buffer, int32_t size) {
nsresult rv = NS_OK;
static const char* hexdigits = "0123456789ABCDEF";
char out_buffer[80];
RangedPtr<char> out(out_buffer);
bool white = false;
// Populate the out_buffer with quoted-printable data, one line at a time.
const uint8_t* in = (uint8_t*)buffer;
const uint8_t* end = in + size;
for (; in < end; in++) {
if (*in == '\r' || *in == '\n') {
// If it's CRLF, swallow two chars instead of one.
if (in + 1 < end && in[0] == '\r' && in[1] == '\n') in++;
// Whitespace cannot be allowed to occur at the end of the line, so we
// back up and replace the whitespace with its code.
if (white) {
out--;
char whitespace_char = *out;
*out++ = '=';
*out++ = hexdigits[whitespace_char >> 4];
*out++ = hexdigits[whitespace_char & 0xF];
}
// Now write out the newline.
*out++ = '\r';
*out++ = '\n';
white = false;
rv = mCallback(out_buffer, out.get() - out_buffer, mClosure);
NS_ENSURE_SUCCESS(rv, rv);
out = out_buffer;
mCurrentColumn = 0;
} else if (mCurrentColumn == 0 && *in == '.') {
// Just to be SMTP-safe, if "." appears in column 0, encode it.
goto HEX;
} else if (mCurrentColumn == 0 && *in == 'F' &&
(in >= end - 1 || in[1] == 'r') &&
(in >= end - 2 || in[2] == 'o') &&
(in >= end - 3 || in[3] == 'm') &&
(in >= end - 4 || in[4] == ' ')) {
// If this line begins with "From " (or it could but we don't have enough
// data in the buffer to be certain), encode the 'F' in hex to avoid
// potential problems with BSD mailbox formats.
goto HEX;
} else if ((*in >= 33 && *in <= 60) |
(*in >= 62 &&
*in <= 126)) // Printable characters except for '='
{
white = false;
*out++ = *in;
mCurrentColumn++;
} else if (*in == ' ' || *in == '\t') // Whitespace
{
white = true;
*out++ = *in;
mCurrentColumn++;
} else {
// Encode the characters here
HEX:
white = false;
*out++ = '=';
*out++ = hexdigits[*in >> 4];
*out++ = hexdigits[*in & 0xF];
mCurrentColumn += 3;
}
MOZ_ASSERT(mCurrentColumn <= 76, "Why haven't we added a line break yet?");
if (mCurrentColumn >= 73) // Soft line break for readability
{
*out++ = '=';
*out++ = '\r';
*out++ = '\n';
rv = mCallback(out_buffer, out.get() - out_buffer, mClosure);
NS_ENSURE_SUCCESS(rv, rv);
out = out_buffer;
white = false;
mCurrentColumn = 0;
}
}
// Write out the unwritten portion of the last line buffer.
if (out.get() != out_buffer) {
rv = mCallback(out_buffer, out.get() - out_buffer, mClosure);
NS_ENSURE_SUCCESS(rv, rv);
}
return NS_OK;
}
MimeEncoder* MimeEncoder::GetBase64Encoder(OutputCallback callback,
void* closure) {
return new Base64Encoder(callback, closure);
}
MimeEncoder* MimeEncoder::GetQPEncoder(OutputCallback callback, void* closure) {
return new QPEncoder(callback, closure);
}
} // namespace mailnews
} // namespace mozilla